! Started logfile: /scr/pima/bg219a_uvs/J1431+3952_S_dfm.log on Fri May 20 00:10:34 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1431+3952_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1431+3952_S_uva.fits ! AN table 1: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.695578 visibilities/baseline/integration-bin. ! Found source: J1431+3952 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1636 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1431+3952_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.040775Jy sigma=26.981848 ! Fit after self-cal, rms=0.814638Jy sigma=20.932176 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=4.257 mas, bpa=30.09 degrees ! Estimated noise=1.04641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144358 Jy ! Component: 100 - total flux cleaned = 0.176127 Jy ! Total flux subtracted in 100 components = 0.176127 Jy ! Clean residual min=-0.009767 max=0.013581 Jy/beam ! Clean residual mean=-0.000016 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.176127 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.176127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054465Jy sigma=1.388697 ! Fit after self-cal, rms=0.054474Jy sigma=1.388399 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=4.849 mas, bpa=27.15 degrees ! Estimated noise=0.754867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137639 Jy ! Component: 100 - total flux cleaned = 0.0204455 Jy ! Component: 150 - total flux cleaned = 0.0244818 Jy ! Component: 200 - total flux cleaned = 0.027031 Jy ! Total flux subtracted in 200 components = 0.027031 Jy ! Clean residual min=-0.007861 max=0.012797 Jy/beam ! Clean residual mean=-0.000012 rms=0.002319 Jy/beam ! Combined flux in latest and established models = 0.203158 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.203158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051477Jy sigma=1.290724 ! Fit after self-cal, rms=0.051420Jy sigma=1.288648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.896 x 4.849 at 27.15 degrees (North through East) ! Clean map min=-0.0080042 max=0.18441 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.09 LA 1.01 MK 1.09 NL 1.02 ! OV 0.98 PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 LA 0.98 MK 1.03 NL 1.01 ! OV 1.05 PT 0.96 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.11 LA 1.01 MK 1.01 NL 0.99 ! OV 1.01 PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 LA 0.98 MK 0.99 NL 0.98 ! OV 1.00 PT 0.91 SC 0.96 ! ! ! Fit before self-cal, rms=0.051420Jy sigma=1.288648 ! Fit after self-cal, rms=0.050842Jy sigma=1.249209 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=4.877 mas, bpa=27.65 degrees ! Estimated noise=0.752601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825849 Jy ! Component: 100 - total flux cleaned = 0.00987814 Jy ! Component: 150 - total flux cleaned = 0.0108974 Jy ! Component: 200 - total flux cleaned = 0.0110685 Jy ! Total flux subtracted in 200 components = 0.0110685 Jy ! Clean residual min=-0.005411 max=0.005139 Jy/beam ! Clean residual mean=-0.000040 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.214226 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.214226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049369Jy sigma=1.203409 ! Fit after self-cal, rms=0.049204Jy sigma=1.198453 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049204Jy sigma=1.198453 ! Fit after self-cal, rms=0.048826Jy sigma=1.184386 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=4.838 mas, bpa=26.98 degrees ! Estimated noise=0.750587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229643 Jy ! Component: 100 - total flux cleaned = 0.00267953 Jy ! Component: 150 - total flux cleaned = 0.00285831 Jy ! Component: 200 - total flux cleaned = 0.00281205 Jy ! Total flux subtracted in 200 components = 0.00281205 Jy ! Clean residual min=-0.004047 max=0.003751 Jy/beam ! Clean residual mean=-0.000013 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.217038 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.217038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048605Jy sigma=1.178494 ! Fit after self-cal, rms=0.048598Jy sigma=1.178023 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691129 Jy ! Component: 100 - total flux cleaned = 0.000651708 Jy ! Component: 150 - total flux cleaned = 0.000612786 Jy ! Component: 200 - total flux cleaned = 0.000575862 Jy ! Total flux subtracted in 200 components = 0.000575862 Jy ! Clean residual min=-0.003946 max=0.003596 Jy/beam ! Clean residual mean=-0.000014 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.217614 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.217614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048525Jy sigma=1.176237 ! Fit after self-cal, rms=0.048522Jy sigma=1.176108 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048522Jy sigma=1.176108 ! Fit after self-cal, rms=0.048382Jy sigma=1.175631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=4.826 mas, bpa=26.76 degrees ! Estimated noise=0.749079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681368 Jy ! Component: 100 - total flux cleaned = 0.000855482 Jy ! Component: 150 - total flux cleaned = 0.0008543 Jy ! Component: 200 - total flux cleaned = 0.000827149 Jy ! Total flux subtracted in 200 components = 0.000827149 Jy ! Clean residual min=-0.003785 max=0.003299 Jy/beam ! Clean residual mean=-0.000014 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.218441 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.218441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048339Jy sigma=1.174463 ! Fit after self-cal, rms=0.048338Jy sigma=1.174390 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250018 Jy ! Component: 100 - total flux cleaned = 0.000275666 Jy ! Component: 150 - total flux cleaned = 0.000275363 Jy ! Component: 200 - total flux cleaned = 0.000275187 Jy ! Total flux subtracted in 200 components = 0.000275187 Jy ! Clean residual min=-0.003738 max=0.003229 Jy/beam ! Clean residual mean=-0.000015 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.218717 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.218716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048316Jy sigma=1.173786 ! Fit after self-cal, rms=0.048317Jy sigma=1.173754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048317Jy sigma=1.173754 ! Fit after self-cal, rms=0.048285Jy sigma=1.173691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.342 mas, bmaj=10.4 mas, bpa=24.97 degrees ! Estimated noise=0.93787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954436 Jy ! Component: 100 - total flux cleaned = 0.00109852 Jy ! Component: 150 - total flux cleaned = 0.00116113 Jy ! Component: 200 - total flux cleaned = 0.00119046 Jy ! Total flux subtracted in 200 components = 0.00119046 Jy ! Clean residual min=-0.003689 max=0.003641 Jy/beam ! Clean residual mean=-0.000032 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.219907 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.219907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048272Jy sigma=1.173302 ! Fit after self-cal, rms=0.048269Jy sigma=1.173233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303151 Jy ! Component: 100 - total flux cleaned = 0.000303855 Jy ! Component: 150 - total flux cleaned = 0.000304634 Jy ! Component: 200 - total flux cleaned = 0.000304461 Jy ! Total flux subtracted in 200 components = 0.000304461 Jy ! Clean residual min=-0.003632 max=0.003567 Jy/beam ! Clean residual mean=-0.000032 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.220211 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.220211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048271Jy sigma=1.173242 ! Fit after self-cal, rms=0.048270Jy sigma=1.173212 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.822 mas, bpa=26.68 degrees ! Estimated noise=0.748722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 4.822 at 26.68 degrees (North through East) ! Clean map min=-0.0035874 max=0.18343 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=4.228 mas, bpa=29.92 degrees ! Estimated noise=1.0361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142838 Jy ! Component: 100 - total flux cleaned = 0.174935 Jy ! Component: 150 - total flux cleaned = 0.18832 Jy ! Component: 200 - total flux cleaned = 0.196376 Jy ! Total flux subtracted in 200 components = 0.196376 Jy ! Clean residual min=-0.005437 max=0.006846 Jy/beam ! Clean residual mean=-0.000011 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.196376 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.196376 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.822 mas, bpa=26.68 degrees ! Estimated noise=0.748722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767306 Jy ! Component: 100 - total flux cleaned = 0.0126924 Jy ! Component: 150 - total flux cleaned = 0.0163039 Jy ! Component: 200 - total flux cleaned = 0.0187606 Jy ! Total flux subtracted in 200 components = 0.0187606 Jy ! Clean residual min=-0.004016 max=0.003681 Jy/beam ! Clean residual mean=-0.000018 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.215136 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.215136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.342 mas, bmaj=10.4 mas, bpa=24.97 degrees ! Estimated noise=0.93787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276904 Jy ! Component: 100 - total flux cleaned = 0.00335791 Jy ! Component: 150 - total flux cleaned = 0.0036086 Jy ! Component: 200 - total flux cleaned = 0.00383145 Jy ! Total flux subtracted in 200 components = 0.00383145 Jy ! Clean residual min=-0.003961 max=0.003878 Jy/beam ! Clean residual mean=-0.000034 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.218968 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198017 Jy ! Component: 100 - total flux cleaned = 0.000416649 Jy ! Component: 150 - total flux cleaned = 0.000536935 Jy ! Component: 200 - total flux cleaned = 0.000718875 Jy ! Total flux subtracted in 200 components = 0.000718875 Jy ! Clean residual min=-0.003833 max=0.003715 Jy/beam ! Clean residual mean=-0.000033 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.219687 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 82 components and 0.219687 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=4.822 mas, bpa=26.68 degrees ! Estimated noise=0.748722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253467 Jy ! Component: 100 - total flux cleaned = -0.000153332 Jy ! Component: 150 - total flux cleaned = -0.000107842 Jy ! Component: 200 - total flux cleaned = -7.3305e-05 Jy ! Total flux subtracted in 200 components = -7.3305e-05 Jy ! Clean residual min=-0.003696 max=0.003129 Jy/beam ! Clean residual mean=-0.000015 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.219613 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.219613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048314Jy sigma=1.174636 ! Fit after self-cal, rms=0.048301Jy sigma=1.174283 wmodel /J1431+3952_S_map.mod ! wmodel: Unable to open new model file: /J1431+3952_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1431+3952_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 4.822 at 26.68 degrees (North through East) ! Clean map min=-0.0035691 max=0.1847 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1431+3952_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.184697 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000805048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30762 1.30762 2.61525 5.2305 10.461 20.922 41.844 83.6879 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.184 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 229.423 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1431+3952_S_dfm.log closed on Fri May 20 00:10:36 2016