! Started logfile: /scr/pima/bg219a_uvs/J1358+1119_S_dfm.log on Fri May 20 00:10:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1358+1119_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1358+1119_S_uva.fits
! AN table 1: 48 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.683532 visibilities/baseline/integration-bin.
! Found source: J1358+1119
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2756 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1358+1119_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999713Jy  sigma=24.386862
! Fit after  self-cal, rms=0.856950Jy  sigma=20.989462
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=6.058 mas, bpa=-6.324 degrees
! Estimated noise=0.770505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10808 Jy
! Component: 100  -  total flux cleaned = 0.1362 Jy
! Total flux subtracted in 100 components = 0.1362 Jy
! Clean residual min=-0.007001 max=0.011761 Jy/beam
! Clean residual mean=-0.000115 rms=0.002185 Jy/beam
! Combined flux in latest and established models = 0.1362 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.1362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058128Jy  sigma=1.355998
! Fit after  self-cal, rms=0.058156Jy  sigma=1.355618
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.946 mas, bmaj=7.065 mas, bpa=-6.246 degrees
! Estimated noise=0.563621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153747 Jy
! Component: 100  -  total flux cleaned = 0.0222101 Jy
! Component: 150  -  total flux cleaned = 0.02566 Jy
! Component: 200  -  total flux cleaned = 0.0270359 Jy
! Total flux subtracted in 200 components = 0.0270359 Jy
! Clean residual min=-0.003964 max=0.004500 Jy/beam
! Clean residual mean=-0.000055 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.163235 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 39 components and 0.163235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054421Jy  sigma=1.260854
! Fit after  self-cal, rms=0.054445Jy  sigma=1.260388
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.946 x 7.065 at -6.246 degrees (North through East)
! Clean map  min=-0.0038069  max=0.14404 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        1.04     NL        0.98     
!   OV        1.00     PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.02     NL        1.01     
!   OV        0.98     PT        1.00     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        0.96     MK        1.01     NL        0.99     
!   OV        1.01     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        1.00     MK        0.98     NL        1.01     
!   OV        0.95     PT        1.00     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.054445Jy  sigma=1.260388
! Fit after  self-cal, rms=0.053900Jy  sigma=1.255845
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.954 mas, bmaj=7.053 mas, bpa=-5.763 degrees
! Estimated noise=0.560278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103934 Jy
! Component: 100  -  total flux cleaned = -0.00104495 Jy
! Component: 150  -  total flux cleaned = -0.00104825 Jy
! Component: 200  -  total flux cleaned = -0.000998088 Jy
! Total flux subtracted in 200 components = -0.000998088 Jy
! Clean residual min=-0.003271 max=0.003997 Jy/beam
! Clean residual mean=-0.000041 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.162237 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.162237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053778Jy  sigma=1.252874
! Fit after  self-cal, rms=0.053780Jy  sigma=1.252801
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053780Jy  sigma=1.252801
! Fit after  self-cal, rms=0.053981Jy  sigma=1.241919
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=7.034 mas, bpa=-6.08 degrees
! Estimated noise=0.561444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231252 Jy
! Component: 100  -  total flux cleaned = -0.000257343 Jy
! Component: 150  -  total flux cleaned = -0.000257085 Jy
! Component: 200  -  total flux cleaned = -0.000277719 Jy
! Total flux subtracted in 200 components = -0.000277719 Jy
! Clean residual min=-0.002573 max=0.002873 Jy/beam
! Clean residual mean=-0.000032 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.16196 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.16196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053957Jy  sigma=1.241438
! Fit after  self-cal, rms=0.053970Jy  sigma=1.241337
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.62567e-05 Jy
! Component: 100  -  total flux cleaned = -6.31194e-05 Jy
! Component: 150  -  total flux cleaned = -8.04373e-05 Jy
! Component: 200  -  total flux cleaned = -0.00011298 Jy
! Total flux subtracted in 200 components = -0.00011298 Jy
! Clean residual min=-0.002566 max=0.002793 Jy/beam
! Clean residual mean=-0.000032 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.161847 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 52 components and 0.161847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053957Jy  sigma=1.241112
! Fit after  self-cal, rms=0.053958Jy  sigma=1.241101
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053958Jy  sigma=1.241101
! Fit after  self-cal, rms=0.053969Jy  sigma=1.241061
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=7.03 mas, bpa=-5.977 degrees
! Estimated noise=0.561615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121529 Jy
! Component: 100  -  total flux cleaned = -0.000169434 Jy
! Component: 150  -  total flux cleaned = -0.000183952 Jy
! Component: 200  -  total flux cleaned = -0.000211764 Jy
! Total flux subtracted in 200 components = -0.000211764 Jy
! Clean residual min=-0.002648 max=0.002737 Jy/beam
! Clean residual mean=-0.000033 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.161635 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 53 components and 0.161635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053960Jy  sigma=1.240875
! Fit after  self-cal, rms=0.053961Jy  sigma=1.240867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.90817e-05 Jy
! Component: 100  -  total flux cleaned = -6.40509e-05 Jy
! Component: 150  -  total flux cleaned = -8.66302e-05 Jy
! Component: 200  -  total flux cleaned = -9.79459e-05 Jy
! Total flux subtracted in 200 components = -9.79459e-05 Jy
! Clean residual min=-0.002681 max=0.002696 Jy/beam
! Clean residual mean=-0.000034 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.161537 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 53 components and 0.161537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053954Jy  sigma=1.240764
! Fit after  self-cal, rms=0.053956Jy  sigma=1.240756
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053956Jy  sigma=1.240756
! Fit after  self-cal, rms=0.053932Jy  sigma=1.240741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.097 mas, bmaj=14.59 mas, bpa=-15.01 degrees
! Estimated noise=0.67733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.58128e-05 Jy
! Component: 100  -  total flux cleaned = 4.46597e-05 Jy
! Component: 150  -  total flux cleaned = 4.17497e-06 Jy
! Component: 200  -  total flux cleaned = -4.35128e-05 Jy
! Total flux subtracted in 200 components = -4.35128e-05 Jy
! Clean residual min=-0.003102 max=0.002852 Jy/beam
! Clean residual mean=-0.000063 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.161493 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 57 components and 0.161493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053937Jy  sigma=1.240802
! Fit after  self-cal, rms=0.053932Jy  sigma=1.240750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.97344e-05 Jy
! Component: 100  -  total flux cleaned = 2.00758e-05 Jy
! Component: 150  -  total flux cleaned = -1.22387e-05 Jy
! Component: 200  -  total flux cleaned = -3.22549e-05 Jy
! Total flux subtracted in 200 components = -3.22549e-05 Jy
! Clean residual min=-0.003066 max=0.002846 Jy/beam
! Clean residual mean=-0.000063 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.161461 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.161461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053942Jy  sigma=1.240965
! Fit after  self-cal, rms=0.053939Jy  sigma=1.240934
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=7.028 mas, bpa=-5.91 degrees
! Estimated noise=0.56144 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.967 x 7.028 at -5.91 degrees (North through East)
! Clean map  min=-0.0026344  max=0.1437 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.175 mas, bmaj=6.015 mas, bpa=-6.016 degrees
! Estimated noise=0.771028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108037 Jy
! Component: 100  -  total flux cleaned = 0.136352 Jy
! Component: 150  -  total flux cleaned = 0.148334 Jy
! Component: 200  -  total flux cleaned = 0.154883 Jy
! Total flux subtracted in 200 components = 0.154883 Jy
! Clean residual min=-0.004454 max=0.005082 Jy/beam
! Clean residual mean=-0.000034 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.154883 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.154883 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=7.028 mas, bpa=-5.91 degrees
! Estimated noise=0.56144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00462732 Jy
! Component: 100  -  total flux cleaned = 0.00610584 Jy
! Component: 150  -  total flux cleaned = 0.00672427 Jy
! Component: 200  -  total flux cleaned = 0.00720885 Jy
! Total flux subtracted in 200 components = 0.00720885 Jy
! Clean residual min=-0.002779 max=0.002425 Jy/beam
! Clean residual mean=-0.000031 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.162092 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.162092 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.097 mas, bmaj=14.59 mas, bpa=-15.01 degrees
! Estimated noise=0.67733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106154 Jy
! Component: 100  -  total flux cleaned = 0.00141534 Jy
! Component: 150  -  total flux cleaned = 0.00171666 Jy
! Component: 200  -  total flux cleaned = 0.00192899 Jy
! Total flux subtracted in 200 components = 0.00192899 Jy
! Clean residual min=-0.002540 max=0.002731 Jy/beam
! Clean residual mean=-0.000038 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.164021 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169445 Jy
! Component: 100  -  total flux cleaned = 0.0002565 Jy
! Component: 150  -  total flux cleaned = 0.000310493 Jy
! Component: 200  -  total flux cleaned = 0.000361304 Jy
! Total flux subtracted in 200 components = 0.000361304 Jy
! Clean residual min=-0.002491 max=0.002692 Jy/beam
! Clean residual mean=-0.000034 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.164382 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 59 components and 0.164382 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=7.028 mas, bpa=-5.91 degrees
! Estimated noise=0.56144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259943 Jy
! Component: 100  -  total flux cleaned = -0.000200058 Jy
! Component: 150  -  total flux cleaned = -0.000199782 Jy
! Component: 200  -  total flux cleaned = -0.000177302 Jy
! Total flux subtracted in 200 components = -0.000177302 Jy
! Clean residual min=-0.002460 max=0.002301 Jy/beam
! Clean residual mean=-0.000019 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.164205 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 68 components and 0.164205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053827Jy  sigma=1.238375
! Fit after  self-cal, rms=0.053809Jy  sigma=1.237982
wmodel /J1358+1119_S_map.mod
! wmodel: Unable to open new model file: /J1358+1119_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1358+1119_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.967 x 7.028 at -5.91 degrees (North through East)
! Clean map  min=-0.0024471  max=0.1428 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1358+1119_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.142799 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000592023 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24375 1.24375 2.48751 4.97501 9.95003 19.9001 39.8001 79.6002
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  241.205 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1358+1119_S_dfm.log closed on Fri May 20 00:10:14 2016