! Started logfile: /scr/pima/bg219a_uvs/J1356-1724_S_dfm.log on Fri May 20 00:10:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1356-1724_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1356-1724_S_uva.fits
! AN table 1: 62 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.816436 visibilities/baseline/integration-bin.
! Found source: J1356-1724
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 4252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1356-1724_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011172Jy  sigma=21.611089
! Fit after  self-cal, rms=0.899781Jy  sigma=19.151343
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.478 mas, bmaj=6.154 mas, bpa=-3.342 degrees
! Estimated noise=0.79646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0767016 Jy
! Component: 100  -  total flux cleaned = 0.095442 Jy
! Total flux subtracted in 100 components = 0.095442 Jy
! Clean residual min=-0.007393 max=0.009084 Jy/beam
! Clean residual mean=0.000037 rms=0.002006 Jy/beam
! Combined flux in latest and established models = 0.095442 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.095442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065936Jy  sigma=1.322415
! Fit after  self-cal, rms=0.065945Jy  sigma=1.321921
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=7.134 mas, bpa=-4.808 degrees
! Estimated noise=0.553013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014367 Jy
! Component: 100  -  total flux cleaned = 0.0217026 Jy
! Component: 150  -  total flux cleaned = 0.0257686 Jy
! Component: 200  -  total flux cleaned = 0.0280887 Jy
! Total flux subtracted in 200 components = 0.0280887 Jy
! Clean residual min=-0.003614 max=0.005619 Jy/beam
! Clean residual mean=0.000028 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.123531 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.123531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063189Jy  sigma=1.248989
! Fit after  self-cal, rms=0.063169Jy  sigma=1.247766
! Inverting map 
! Added new window around map position (7, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539576 Jy
! Component: 100  -  total flux cleaned = 0.00700284 Jy
! Component: 150  -  total flux cleaned = 0.00744978 Jy
! Component: 200  -  total flux cleaned = 0.00772571 Jy
! Total flux subtracted in 200 components = 0.00772571 Jy
! Clean residual min=-0.003034 max=0.002869 Jy/beam
! Clean residual mean=0.000012 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.131256 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.131256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062741Jy  sigma=1.238231
! Fit after  self-cal, rms=0.062667Jy  sigma=1.236712
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.946 x 7.134 at -4.808 degrees (North through East)
! Clean map  min=-0.0029044  max=0.10087 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        1.00     NL        1.01     
!   OV        1.05     PT        0.96     SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.01     NL        1.04     
!   OV        0.99     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.98     MK        0.97     NL        1.03     
!   OV        1.00     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.99     MK        0.98     NL        0.99     
!   OV        0.99     PT        1.02     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.062667Jy  sigma=1.236712
! Fit after  self-cal, rms=0.062266Jy  sigma=1.234332
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.942 mas, bmaj=7.122 mas, bpa=-4.78 degrees
! Estimated noise=0.549794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474401 Jy
! Component: 100  -  total flux cleaned = 0.000342735 Jy
! Component: 150  -  total flux cleaned = 0.000160835 Jy
! Component: 200  -  total flux cleaned = 0.000129167 Jy
! Total flux subtracted in 200 components = 0.000129167 Jy
! Clean residual min=-0.002915 max=0.002322 Jy/beam
! Clean residual mean=0.000003 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.131386 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.131386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062203Jy  sigma=1.233208
! Fit after  self-cal, rms=0.062204Jy  sigma=1.233025
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062204Jy  sigma=1.233025
! Fit after  self-cal, rms=0.061700Jy  sigma=1.229230
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=7.076 mas, bpa=-4.681 degrees
! Estimated noise=0.547016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472014 Jy
! Component: 100  -  total flux cleaned = 0.000567415 Jy
! Component: 150  -  total flux cleaned = 0.000569346 Jy
! Component: 200  -  total flux cleaned = 0.000547352 Jy
! Total flux subtracted in 200 components = 0.000547352 Jy
! Clean residual min=-0.002612 max=0.002208 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.131933 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.131933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061663Jy  sigma=1.228696
! Fit after  self-cal, rms=0.061669Jy  sigma=1.228542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155368 Jy
! Component: 100  -  total flux cleaned = 0.000177705 Jy
! Component: 150  -  total flux cleaned = 0.000178322 Jy
! Component: 200  -  total flux cleaned = 0.000143755 Jy
! Total flux subtracted in 200 components = 0.000143755 Jy
! Clean residual min=-0.002581 max=0.002143 Jy/beam
! Clean residual mean=0.000001 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.132077 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 83 components and 0.132077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061653Jy  sigma=1.228341
! Fit after  self-cal, rms=0.061649Jy  sigma=1.228314
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061649Jy  sigma=1.228314
! Fit after  self-cal, rms=0.061397Jy  sigma=1.228234
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.937 mas, bmaj=7.057 mas, bpa=-4.622 degrees
! Estimated noise=0.545464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028507 Jy
! Component: 100  -  total flux cleaned = 0.00030431 Jy
! Component: 150  -  total flux cleaned = 0.000320721 Jy
! Component: 200  -  total flux cleaned = 0.000306295 Jy
! Total flux subtracted in 200 components = 0.000306295 Jy
! Clean residual min=-0.002527 max=0.002114 Jy/beam
! Clean residual mean=0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.132383 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.132383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061385Jy  sigma=1.228079
! Fit after  self-cal, rms=0.061382Jy  sigma=1.228057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.22588e-05 Jy
! Component: 100  -  total flux cleaned = 8.60883e-05 Jy
! Component: 150  -  total flux cleaned = 6.06483e-05 Jy
! Component: 200  -  total flux cleaned = 3.627e-05 Jy
! Total flux subtracted in 200 components = 3.627e-05 Jy
! Clean residual min=-0.002541 max=0.002092 Jy/beam
! Clean residual mean=0.000000 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.132419 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.132419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061374Jy  sigma=1.227976
! Fit after  self-cal, rms=0.061373Jy  sigma=1.227966
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061373Jy  sigma=1.227966
! Fit after  self-cal, rms=0.061281Jy  sigma=1.227945
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.542 mas, bmaj=17.22 mas, bpa=-4.901 degrees
! Estimated noise=0.728127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86112e-05 Jy
! Component: 100  -  total flux cleaned = -1.75199e-05 Jy
! Component: 150  -  total flux cleaned = -8.53154e-06 Jy
! Component: 200  -  total flux cleaned = -1.45466e-05 Jy
! Total flux subtracted in 200 components = -1.45466e-05 Jy
! Clean residual min=-0.001944 max=0.001863 Jy/beam
! Clean residual mean=0.000002 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.132405 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 118 components and 0.132405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061281Jy  sigma=1.227927
! Fit after  self-cal, rms=0.061279Jy  sigma=1.227905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.99764e-06 Jy
! Component: 100  -  total flux cleaned = -2.51673e-08 Jy
! Component: 150  -  total flux cleaned = -6.22578e-06 Jy
! Component: 200  -  total flux cleaned = -1.21468e-05 Jy
! Total flux subtracted in 200 components = -1.21468e-05 Jy
! Clean residual min=-0.001943 max=0.001862 Jy/beam
! Clean residual mean=0.000002 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.132393 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 123 components and 0.132393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061280Jy  sigma=1.227904
! Fit after  self-cal, rms=0.061278Jy  sigma=1.227893
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=7.05 mas, bpa=-4.591 degrees
! Estimated noise=0.544819 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.936 x 7.05 at -4.591 degrees (North through East)
! Clean map  min=-0.0024218  max=0.09974 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.469 mas, bmaj=6.085 mas, bpa=-3.033 degrees
! Estimated noise=0.785492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0748001 Jy
! Component: 100  -  total flux cleaned = 0.09411 Jy
! Component: 150  -  total flux cleaned = 0.105898 Jy
! Component: 200  -  total flux cleaned = 0.113969 Jy
! Total flux subtracted in 200 components = 0.113969 Jy
! Clean residual min=-0.005328 max=0.005017 Jy/beam
! Clean residual mean=0.000016 rms=0.001336 Jy/beam
! Combined flux in latest and established models = 0.113969 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.113969 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=7.05 mas, bpa=-4.591 degrees
! Estimated noise=0.544819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00741538 Jy
! Component: 100  -  total flux cleaned = 0.0114493 Jy
! Component: 150  -  total flux cleaned = 0.0140716 Jy
! Component: 200  -  total flux cleaned = 0.0151605 Jy
! Total flux subtracted in 200 components = 0.0151605 Jy
! Clean residual min=-0.002981 max=0.002142 Jy/beam
! Clean residual mean=0.000008 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.12913 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 54 components and 0.12913 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.542 mas, bmaj=17.22 mas, bpa=-4.901 degrees
! Estimated noise=0.728127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182034 Jy
! Component: 100  -  total flux cleaned = 0.0024345 Jy
! Component: 150  -  total flux cleaned = 0.00262105 Jy
! Component: 200  -  total flux cleaned = 0.00277488 Jy
! Total flux subtracted in 200 components = 0.00277488 Jy
! Clean residual min=-0.001932 max=0.001864 Jy/beam
! Clean residual mean=0.000004 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.131905 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147722 Jy
! Component: 100  -  total flux cleaned = 0.000256625 Jy
! Component: 150  -  total flux cleaned = 0.000349811 Jy
! Component: 200  -  total flux cleaned = 0.000429923 Jy
! Total flux subtracted in 200 components = 0.000429923 Jy
! Clean residual min=-0.001934 max=0.001875 Jy/beam
! Clean residual mean=0.000002 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.132335 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 80 components and 0.132335 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.936 mas, bmaj=7.05 mas, bpa=-4.591 degrees
! Estimated noise=0.544819 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445676 Jy
! Component: 100  -  total flux cleaned = -0.00028331 Jy
! Component: 150  -  total flux cleaned = -0.000146501 Jy
! Component: 200  -  total flux cleaned = -0.000146175 Jy
! Total flux subtracted in 200 components = -0.000146175 Jy
! Clean residual min=-0.002681 max=0.002235 Jy/beam
! Clean residual mean=0.000001 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.132188 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 0.132188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061307Jy  sigma=1.228575
! Fit after  self-cal, rms=0.061310Jy  sigma=1.228409
wmodel /J1356-1724_S_map.mod
! wmodel: Unable to open new model file: /J1356-1724_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1356-1724_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.936 x 7.05 at -4.591 degrees (North through East)
! Clean map  min=-0.0024567  max=0.10021 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1356-1724_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.100205 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000539475 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61511 1.61511 3.23022 6.46044 12.9209 25.8418 51.6836
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.745 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1356-1724_S_dfm.log closed on Fri May 20 00:10:06 2016