! Started logfile: /scr/pima/bg219a_uvs/J1356-1101_X_dfm.log on Fri May 20 00:10:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1356-1101_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1356-1101_X_uva.fits
! AN table 1: 57 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.792815 visibilities/baseline/integration-bin.
! Found source: J1356-1101
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 11388 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1356-1101_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002795Jy  sigma=27.241007
! Fit after  self-cal, rms=0.933929Jy  sigma=25.316223
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6367 mas, bmaj=1.606 mas, bpa=-3.148 degrees
! Estimated noise=0.490694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466491 Jy
! Component: 100  -  total flux cleaned = 0.0588182 Jy
! Total flux subtracted in 100 components = 0.0588182 Jy
! Clean residual min=-0.006875 max=0.010471 Jy/beam
! Clean residual mean=0.000010 rms=0.001562 Jy/beam
! Combined flux in latest and established models = 0.0588182 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0588182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058175Jy  sigma=1.522178
! Fit after  self-cal, rms=0.057416Jy  sigma=1.501871
! Inverting map 
! Added new window around map position (1, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930829 Jy
! Component: 100  -  total flux cleaned = 0.0148333 Jy
! Total flux subtracted in 100 components = 0.0148333 Jy
! Clean residual min=-0.005071 max=0.009251 Jy/beam
! Clean residual mean=0.000008 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.0736515 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.0736515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054723Jy  sigma=1.421776
! Fit after  self-cal, rms=0.054454Jy  sigma=1.413294
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616036 Jy
! Component: 100  -  total flux cleaned = 0.00957715 Jy
! Total flux subtracted in 100 components = 0.00957715 Jy
! Clean residual min=-0.004042 max=0.006963 Jy/beam
! Clean residual mean=0.000007 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.0832286 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.0832286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053262Jy  sigma=1.377782
! Fit after  self-cal, rms=0.053110Jy  sigma=1.372964
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7891 mas, bmaj=1.945 mas, bpa=-3.07 degrees
! Estimated noise=0.25209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00903823 Jy
! Component: 100  -  total flux cleaned = 0.0143629 Jy
! Component: 150  -  total flux cleaned = 0.0180039 Jy
! Component: 200  -  total flux cleaned = 0.0206914 Jy
! Total flux subtracted in 200 components = 0.0206914 Jy
! Clean residual min=-0.002631 max=0.002955 Jy/beam
! Clean residual mean=0.000016 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.10392 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 53 components and 0.10392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051466Jy  sigma=1.323871
! Fit after  self-cal, rms=0.051309Jy  sigma=1.320271
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7891 x 1.945 at -3.07 degrees (North through East)
! Clean map  min=-0.0025496  max=0.060914 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     LA        0.98     MK        1.05     NL        0.99     
!   OV        1.07     PT        0.96     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.92     MK        1.06     NL        1.04     
!   OV        1.02     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.97     MK        1.04     NL        1.08     
!   OV        1.05     PT        0.93     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.91     MK        1.06     NL        1.07     
!   OV        1.07     PT        0.98     SC        1.12     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.90     MK        1.06     NL        1.04     
!   OV        1.00     PT        1.00     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     LA        0.96     MK        1.05     NL        1.03     
!   OV        1.07     PT        0.93     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.93     MK        1.09     NL        1.04     
!   OV        1.03     PT        0.95     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.95     MK        1.04     NL        1.00     
!   OV        1.01     PT        0.92     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.96     MK        1.00     NL        1.04     
!   OV        1.09     PT        0.95     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.97     MK        0.98     NL        1.04     
!   OV        1.08     PT        0.99     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     LA        0.96     MK        0.90     NL        0.98     
!   OV        1.08     PT        0.99     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.95     MK        0.99     NL        0.95     
!   OV        1.07     PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.051309Jy  sigma=1.320271
! Fit after  self-cal, rms=0.050734Jy  sigma=1.312098
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7966 mas, bmaj=1.958 mas, bpa=-2.766 degrees
! Estimated noise=0.249578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.4, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268502 Jy
! Component: 100  -  total flux cleaned = 0.00416629 Jy
! Component: 150  -  total flux cleaned = 0.00523833 Jy
! Component: 200  -  total flux cleaned = 0.00570192 Jy
! Total flux subtracted in 200 components = 0.00570192 Jy
! Clean residual min=-0.001569 max=0.001577 Jy/beam
! Clean residual mean=-0.000003 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.109622 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 86 components and 0.109622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050586Jy  sigma=1.307451
! Fit after  self-cal, rms=0.050579Jy  sigma=1.306630
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050579Jy  sigma=1.306630
! Fit after  self-cal, rms=0.050511Jy  sigma=1.304385
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7975 mas, bmaj=1.957 mas, bpa=-2.837 degrees
! Estimated noise=0.248778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113991 Jy
! Component: 100  -  total flux cleaned = 0.00159662 Jy
! Component: 150  -  total flux cleaned = 0.00176116 Jy
! Component: 200  -  total flux cleaned = 0.00183522 Jy
! Total flux subtracted in 200 components = 0.00183522 Jy
! Clean residual min=-0.001420 max=0.001441 Jy/beam
! Clean residual mean=0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.111457 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 99 components and 0.111457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050473Jy  sigma=1.303343
! Fit after  self-cal, rms=0.050480Jy  sigma=1.303153
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333852 Jy
! Component: 100  -  total flux cleaned = 0.000449237 Jy
! Component: 150  -  total flux cleaned = 0.000489764 Jy
! Component: 200  -  total flux cleaned = 0.000547366 Jy
! Total flux subtracted in 200 components = 0.000547366 Jy
! Clean residual min=-0.001332 max=0.001425 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.112004 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.112004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050462Jy  sigma=1.302698
! Fit after  self-cal, rms=0.050459Jy  sigma=1.302662
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050459Jy  sigma=1.302662
! Fit after  self-cal, rms=0.050255Jy  sigma=1.302586
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7958 mas, bmaj=1.955 mas, bpa=-2.858 degrees
! Estimated noise=0.247968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389073 Jy
! Component: 100  -  total flux cleaned = 0.000446941 Jy
! Component: 150  -  total flux cleaned = 0.00049795 Jy
! Component: 200  -  total flux cleaned = 0.000529449 Jy
! Total flux subtracted in 200 components = 0.000529449 Jy
! Clean residual min=-0.001332 max=0.001393 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.112534 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.112534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050242Jy  sigma=1.302262
! Fit after  self-cal, rms=0.050242Jy  sigma=1.302232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102467 Jy
! Component: 100  -  total flux cleaned = 0.000117123 Jy
! Component: 150  -  total flux cleaned = 0.000172723 Jy
! Component: 200  -  total flux cleaned = 0.000159648 Jy
! Total flux subtracted in 200 components = 0.000159648 Jy
! Clean residual min=-0.001325 max=0.001370 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.112694 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 0.112694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050234Jy  sigma=1.302038
! Fit after  self-cal, rms=0.050233Jy  sigma=1.302029
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050233Jy  sigma=1.302029
! Fit after  self-cal, rms=0.050089Jy  sigma=1.302009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=4.839 mas, bpa=-4.961 degrees
! Estimated noise=0.322847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195837 Jy
! Component: 100  -  total flux cleaned = -0.000356405 Jy
! Component: 150  -  total flux cleaned = -0.000483049 Jy
! Component: 200  -  total flux cleaned = -0.000594571 Jy
! Total flux subtracted in 200 components = -0.000594571 Jy
! Clean residual min=-0.001380 max=0.001682 Jy/beam
! Clean residual mean=0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.112099 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 123 components and 0.112099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050086Jy  sigma=1.301948
! Fit after  self-cal, rms=0.050082Jy  sigma=1.301913
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.09004e-06 Jy
! Component: 100  -  total flux cleaned = -5.82576e-05 Jy
! Component: 150  -  total flux cleaned = -0.000113863 Jy
! Component: 200  -  total flux cleaned = -0.000164956 Jy
! Total flux subtracted in 200 components = -0.000164956 Jy
! Clean residual min=-0.001385 max=0.001661 Jy/beam
! Clean residual mean=0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.111934 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 126 components and 0.111934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050082Jy  sigma=1.301924
! Fit after  self-cal, rms=0.050081Jy  sigma=1.301901
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7943 mas, bmaj=1.953 mas, bpa=-2.869 degrees
! Estimated noise=0.24749 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7943 x 1.953 at -2.869 degrees (North through East)
! Clean map  min=-0.0011403  max=0.060414 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6376 mas, bmaj=1.603 mas, bpa=-3.001 degrees
! Estimated noise=0.484643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463767 Jy
! Component: 100  -  total flux cleaned = 0.0624789 Jy
! Component: 150  -  total flux cleaned = 0.0721741 Jy
! Component: 200  -  total flux cleaned = 0.0787574 Jy
! Total flux subtracted in 200 components = 0.0787574 Jy
! Clean residual min=-0.003665 max=0.004015 Jy/beam
! Clean residual mean=0.000006 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.0787574 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0787574 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7943 mas, bmaj=1.953 mas, bpa=-2.869 degrees
! Estimated noise=0.24749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00897612 Jy
! Component: 100  -  total flux cleaned = 0.0144858 Jy
! Component: 150  -  total flux cleaned = 0.0184432 Jy
! Component: 200  -  total flux cleaned = 0.0215101 Jy
! Total flux subtracted in 200 components = 0.0215101 Jy
! Clean residual min=-0.002064 max=0.002526 Jy/beam
! Clean residual mean=0.000014 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.100267 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 62 components and 0.100267 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=4.839 mas, bpa=-4.961 degrees
! Estimated noise=0.322847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427997 Jy
! Component: 100  -  total flux cleaned = 0.00682297 Jy
! Component: 150  -  total flux cleaned = 0.0084738 Jy
! Component: 200  -  total flux cleaned = 0.00960385 Jy
! Total flux subtracted in 200 components = 0.00960385 Jy
! Clean residual min=-0.001743 max=0.001539 Jy/beam
! Clean residual mean=0.000008 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.109871 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811771 Jy
! Component: 100  -  total flux cleaned = 0.00114701 Jy
! Component: 150  -  total flux cleaned = 0.00137222 Jy
! Component: 200  -  total flux cleaned = 0.00153289 Jy
! Total flux subtracted in 200 components = 0.00153289 Jy
! Clean residual min=-0.001535 max=0.001586 Jy/beam
! Clean residual mean=0.000004 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.111404 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 109 components and 0.111404 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7943 mas, bmaj=1.953 mas, bpa=-2.869 degrees
! Estimated noise=0.24749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000607344 Jy
! Component: 100  -  total flux cleaned = 0.000813372 Jy
! Component: 150  -  total flux cleaned = 0.000954183 Jy
! Component: 200  -  total flux cleaned = 0.00101578 Jy
! Total flux subtracted in 200 components = 0.00101578 Jy
! Clean residual min=-0.001431 max=0.001370 Jy/beam
! Clean residual mean=0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.11242 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.11242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050137Jy  sigma=1.303123
! Fit after  self-cal, rms=0.050136Jy  sigma=1.302502
wmodel /J1356-1101_X_map.mod
! wmodel: Unable to open new model file: /J1356-1101_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1356-1101_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7943 x 1.953 at -2.869 degrees (North through East)
! Clean map  min=-0.001205  max=0.05724 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1356-1101_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0572402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00033615 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.76179 1.76179 3.52357 7.04714 14.0943 28.1886 56.3771
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  170.281 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1356-1101_X_dfm.log closed on Fri May 20 00:10:02 2016