! Started logfile: /scr/pima/bg219a_uvs/J1344-1723_X_dfm.log on Fri May 20 00:09:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1344-1723_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1344-1723_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.755291 visibilities/baseline/integration-bin.
! Found source: J1344-1723
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6852 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1344-1723_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.077651Jy  sigma=26.344761
! Fit after  self-cal, rms=0.680561Jy  sigma=15.942782
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6022 mas, bmaj=1.678 mas, bpa=-6.025 degrees
! Estimated noise=0.681008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.248304 Jy
! Component: 100  -  total flux cleaned = 0.315842 Jy
! Total flux subtracted in 100 components = 0.315842 Jy
! Clean residual min=-0.019596 max=0.032765 Jy/beam
! Clean residual mean=-0.000022 rms=0.004676 Jy/beam
! Combined flux in latest and established models = 0.315842 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.315842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099520Jy  sigma=2.195536
! Fit after  self-cal, rms=0.099395Jy  sigma=2.191496
! Inverting map 
! Added new window around map position (0.8, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325604 Jy
! Component: 100  -  total flux cleaned = 0.0502514 Jy
! Total flux subtracted in 100 components = 0.0502514 Jy
! Clean residual min=-0.013701 max=0.021721 Jy/beam
! Clean residual mean=-0.000008 rms=0.003189 Jy/beam
! Combined flux in latest and established models = 0.366093 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.366093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084282Jy  sigma=1.824936
! Fit after  self-cal, rms=0.083801Jy  sigma=1.813333
! Inverting map 
! Added new window around map position (0.8, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147995 Jy
! Component: 100  -  total flux cleaned = 0.0170271 Jy
! Total flux subtracted in 100 components = 0.0170271 Jy
! Clean residual min=-0.010313 max=0.013627 Jy/beam
! Clean residual mean=-0.000003 rms=0.002447 Jy/beam
! Combined flux in latest and established models = 0.38312 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.38312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078324Jy  sigma=1.713693
! Fit after  self-cal, rms=0.078075Jy  sigma=1.706278
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7608 mas, bmaj=2.005 mas, bpa=-5.653 degrees
! Estimated noise=0.38176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011364 Jy
! Component: 100  -  total flux cleaned = 0.0148385 Jy
! Component: 150  -  total flux cleaned = 0.0150634 Jy
! Component: 200  -  total flux cleaned = 0.0154481 Jy
! Total flux subtracted in 200 components = 0.0154481 Jy
! Clean residual min=-0.007664 max=0.008729 Jy/beam
! Clean residual mean=0.000003 rms=0.001811 Jy/beam
! Combined flux in latest and established models = 0.398568 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.398568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075490Jy  sigma=1.661059
! Fit after  self-cal, rms=0.075465Jy  sigma=1.660480
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7608 x 2.005 at -5.653 degrees (North through East)
! Clean map  min=-0.0068477  max=0.3172 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.97     MK        0.99     NL        1.01     
!   OV        1.02     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.99     MK        1.00     NL        0.99     
!   OV        1.02     PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.02     NL        1.01     
!   OV        1.00     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        0.99     NL        1.01     
!   OV        1.01     PT        0.99     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.96     MK        1.00     NL        1.00     
!   OV        1.01     PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        1.03     NL        1.02     
!   OV        1.01     PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        0.99     NL        1.00     
!   OV        1.00     PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.02     NL        1.00     
!   OV        1.01     PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.99     MK        1.00     NL        1.00     
!   OV        1.01     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.97     MK        1.02     NL        1.00     
!   OV        1.01     PT        0.98     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.98     MK        0.98     NL        1.00     
!   OV        1.01     PT        1.00     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.96     MK        1.01     NL        0.99     
!   OV        1.02     PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.075465Jy  sigma=1.660480
! Fit after  self-cal, rms=0.074772Jy  sigma=1.648623
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7602 mas, bmaj=2 mas, bpa=-5.43 degrees
! Estimated noise=0.379279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198114 Jy
! Component: 100  -  total flux cleaned = -0.00244576 Jy
! Component: 150  -  total flux cleaned = -0.00258553 Jy
! Component: 200  -  total flux cleaned = -0.00271277 Jy
! Total flux subtracted in 200 components = -0.00271277 Jy
! Clean residual min=-0.006755 max=0.007910 Jy/beam
! Clean residual mean=0.000005 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 0.395856 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 0.395856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073800Jy  sigma=1.640757
! Fit after  self-cal, rms=0.073771Jy  sigma=1.639927
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073771Jy  sigma=1.639927
! Fit after  self-cal, rms=0.073820Jy  sigma=1.636323
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7579 mas, bmaj=1.995 mas, bpa=-5.277 degrees
! Estimated noise=0.379807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250836 Jy
! Component: 100  -  total flux cleaned = 0.00224717 Jy
! Component: 150  -  total flux cleaned = 0.00213004 Jy
! Component: 200  -  total flux cleaned = 0.00201495 Jy
! Total flux subtracted in 200 components = 0.00201495 Jy
! Clean residual min=-0.006136 max=0.007258 Jy/beam
! Clean residual mean=0.000002 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 0.397871 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.397871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073033Jy  sigma=1.630647
! Fit after  self-cal, rms=0.073023Jy  sigma=1.630362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533939 Jy
! Component: 100  -  total flux cleaned = 0.00673136 Jy
! Component: 150  -  total flux cleaned = 0.00701709 Jy
! Component: 200  -  total flux cleaned = 0.00713952 Jy
! Total flux subtracted in 200 components = 0.00713952 Jy
! Clean residual min=-0.005231 max=0.005431 Jy/beam
! Clean residual mean=0.000002 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.40501 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.40501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071989Jy  sigma=1.611193
! Fit after  self-cal, rms=0.071958Jy  sigma=1.610484
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071958Jy  sigma=1.610484
! Fit after  self-cal, rms=0.071903Jy  sigma=1.609160
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7556 mas, bmaj=1.99 mas, bpa=-5.247 degrees
! Estimated noise=0.379611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247099 Jy
! Component: 100  -  total flux cleaned = 0.00258591 Jy
! Component: 150  -  total flux cleaned = 0.00258463 Jy
! Component: 200  -  total flux cleaned = 0.00268309 Jy
! Total flux subtracted in 200 components = 0.00268309 Jy
! Clean residual min=-0.004687 max=0.004831 Jy/beam
! Clean residual mean=0.000001 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.407693 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.407693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071385Jy  sigma=1.603276
! Fit after  self-cal, rms=0.071370Jy  sigma=1.603029
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, -10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176453 Jy
! Component: 100  -  total flux cleaned = 0.00215476 Jy
! Component: 150  -  total flux cleaned = 0.0027895 Jy
! Component: 200  -  total flux cleaned = 0.00335887 Jy
! Total flux subtracted in 200 components = 0.00335887 Jy
! Clean residual min=-0.003961 max=0.003877 Jy/beam
! Clean residual mean=0.000000 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.411052 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.411052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070728Jy  sigma=1.594140
! Fit after  self-cal, rms=0.070727Jy  sigma=1.593780
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070727Jy  sigma=1.593780
! Fit after  self-cal, rms=0.070809Jy  sigma=1.593286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=5.461 mas, bpa=-6.144 degrees
! Estimated noise=0.523954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204407 Jy
! Component: 100  -  total flux cleaned = 0.00263481 Jy
! Component: 150  -  total flux cleaned = 0.00300563 Jy
! Component: 200  -  total flux cleaned = 0.00326733 Jy
! Total flux subtracted in 200 components = 0.00326733 Jy
! Clean residual min=-0.003727 max=0.004166 Jy/beam
! Clean residual mean=0.000001 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.414319 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.414319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070795Jy  sigma=1.592469
! Fit after  self-cal, rms=0.070771Jy  sigma=1.592195
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.24198e-05 Jy
! Component: 100  -  total flux cleaned = 3.35121e-05 Jy
! Component: 150  -  total flux cleaned = 0.000117459 Jy
! Component: 200  -  total flux cleaned = 0.000143945 Jy
! Total flux subtracted in 200 components = 0.000143945 Jy
! Clean residual min=-0.003603 max=0.004091 Jy/beam
! Clean residual mean=0.000001 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.414463 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.414463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070780Jy  sigma=1.592361
! Fit after  self-cal, rms=0.070767Jy  sigma=1.592162
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7546 mas, bmaj=1.989 mas, bpa=-5.231 degrees
! Estimated noise=0.379921 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7546 x 1.989 at -5.231 degrees (North through East)
! Clean map  min=-0.0069705  max=0.32001 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5984 mas, bmaj=1.67 mas, bpa=-5.664 degrees
! Estimated noise=0.673023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.245431 Jy
! Component: 100  -  total flux cleaned = 0.315932 Jy
! Component: 150  -  total flux cleaned = 0.351157 Jy
! Component: 200  -  total flux cleaned = 0.372249 Jy
! Total flux subtracted in 200 components = 0.372249 Jy
! Clean residual min=-0.012432 max=0.018183 Jy/beam
! Clean residual mean=-0.000007 rms=0.002843 Jy/beam
! Combined flux in latest and established models = 0.372249 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.372249 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7546 mas, bmaj=1.989 mas, bpa=-5.231 degrees
! Estimated noise=0.379921 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199506 Jy
! Component: 100  -  total flux cleaned = 0.0285276 Jy
! Component: 150  -  total flux cleaned = 0.03191 Jy
! Component: 200  -  total flux cleaned = 0.0339543 Jy
! Total flux subtracted in 200 components = 0.0339543 Jy
! Clean residual min=-0.007174 max=0.007487 Jy/beam
! Clean residual mean=0.000000 rms=0.001472 Jy/beam
! Combined flux in latest and established models = 0.406203 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.406203 Jy
! Inverting map 
! Added new window around map position (2, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372961 Jy
! Component: 100  -  total flux cleaned = 0.00463039 Jy
! Component: 150  -  total flux cleaned = 0.00543834 Jy
! Component: 200  -  total flux cleaned = 0.00561924 Jy
! Total flux subtracted in 200 components = 0.00561924 Jy
! Clean residual min=-0.005087 max=0.005144 Jy/beam
! Clean residual mean=-0.000000 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.411823 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 57 components and 0.411823 Jy
! Inverting map 
! Added new window around map position (-1, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316966 Jy
! Component: 100  -  total flux cleaned = 0.00315903 Jy
! Component: 150  -  total flux cleaned = 0.00286371 Jy
! Component: 200  -  total flux cleaned = 0.00287199 Jy
! Total flux subtracted in 200 components = 0.00287199 Jy
! Clean residual min=-0.004379 max=0.003851 Jy/beam
! Clean residual mean=0.000001 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.414695 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 68 components and 0.414695 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=5.461 mas, bpa=-6.144 degrees
! Estimated noise=0.523954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539634 Jy
! Component: 100  -  total flux cleaned = 0.000694306 Jy
! Component: 150  -  total flux cleaned = 0.000691142 Jy
! Component: 200  -  total flux cleaned = 0.000623442 Jy
! Total flux subtracted in 200 components = 0.000623442 Jy
! Clean residual min=-0.003645 max=0.004297 Jy/beam
! Clean residual mean=0.000002 rms=0.001207 Jy/beam
! Combined flux in latest and established models = 0.415318 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165491 Jy
! Component: 100  -  total flux cleaned = -0.000214638 Jy
! Component: 150  -  total flux cleaned = -0.000305916 Jy
! Component: 200  -  total flux cleaned = -0.000345451 Jy
! Total flux subtracted in 200 components = -0.000345451 Jy
! Clean residual min=-0.003483 max=0.004318 Jy/beam
! Clean residual mean=0.000002 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.414973 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 90 components and 0.414973 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7546 mas, bmaj=1.989 mas, bpa=-5.231 degrees
! Estimated noise=0.379921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211242 Jy
! Component: 100  -  total flux cleaned = -0.000542695 Jy
! Component: 150  -  total flux cleaned = -0.000645001 Jy
! Component: 200  -  total flux cleaned = -0.000645004 Jy
! Total flux subtracted in 200 components = -0.000645004 Jy
! Clean residual min=-0.003035 max=0.003275 Jy/beam
! Clean residual mean=0.000001 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.414328 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 105 components and 0.414328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070335Jy  sigma=1.587824
! Fit after  self-cal, rms=0.070354Jy  sigma=1.586906
wmodel /J1344-1723_X_map.mod
! wmodel: Unable to open new model file: /J1344-1723_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1344-1723_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7546 x 1.989 at -5.231 degrees (North through East)
! Clean map  min=-0.0059128  max=0.31178 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1344-1723_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.311781 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000719095 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.691923 0.691923 1.38385 2.76769 5.53538 11.0708 22.1415 44.2831 88.5662
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.311 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  433.574 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1344-1723_X_dfm.log closed on Fri May 20 00:09:33 2016