! Started logfile: /scr/pima/bg219a_uvs/J1322-0937_X_dfm.log on Fri May 20 00:08:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1322-0937_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1322-0937_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.689153 visibilities/baseline/integration-bin.
! Found source: J1322-0937
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1322-0937_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.268598Jy  sigma=26.691312
! Fit after  self-cal, rms=0.275988Jy  sigma=5.708105
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6043 mas, bmaj=1.642 mas, bpa=-2.923 degrees
! Estimated noise=0.747537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.576713 Jy
! Component: 100  -  total flux cleaned = 0.702477 Jy
! Total flux subtracted in 100 components = 0.702477 Jy
! Clean residual min=-0.024852 max=0.035892 Jy/beam
! Clean residual mean=0.000143 rms=0.005611 Jy/beam
! Combined flux in latest and established models = 0.702477 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.702477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135769Jy  sigma=2.875424
! Fit after  self-cal, rms=0.135702Jy  sigma=2.874592
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385365 Jy
! Component: 100  -  total flux cleaned = 0.061151 Jy
! Total flux subtracted in 100 components = 0.061151 Jy
! Clean residual min=-0.014214 max=0.018456 Jy/beam
! Clean residual mean=0.000081 rms=0.003205 Jy/beam
! Combined flux in latest and established models = 0.763628 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.763628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120054Jy  sigma=2.543837
! Fit after  self-cal, rms=0.120043Jy  sigma=2.543325
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7168 mas, bmaj=1.84 mas, bpa=-3.36 degrees
! Estimated noise=0.48928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224882 Jy
! Component: 100  -  total flux cleaned = 0.0350784 Jy
! Component: 150  -  total flux cleaned = 0.0425574 Jy
! Component: 200  -  total flux cleaned = 0.0470843 Jy
! Total flux subtracted in 200 components = 0.0470843 Jy
! Clean residual min=-0.012417 max=0.016994 Jy/beam
! Clean residual mean=0.000070 rms=0.003526 Jy/beam
! Combined flux in latest and established models = 0.810712 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 0.810712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115498Jy  sigma=2.462577
! Fit after  self-cal, rms=0.115508Jy  sigma=2.462428
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7168 x 1.84 at -3.36 degrees (North through East)
! Clean map  min=-0.012061  max=0.75042 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        0.99     NL        1.03     
!   OV        1.03     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        0.99     NL        1.03     
!   OV        1.03     PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        1.01     NL        1.04     
!   OV        1.03     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.01     NL        1.05     
!   OV        1.04     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.97     MK        0.98     NL        1.06     
!   OV        1.04     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.00     NL        1.04     
!   OV        1.02     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.00     NL        1.04     
!   OV        1.02     PT        0.95     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.00     NL        1.05     
!   OV        1.02     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        0.99     NL        1.05     
!   OV        1.02     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        0.99     NL        1.03     
!   OV        1.02     PT        0.95     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        0.98     NL        1.03     
!   OV        1.06     PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.96     MK        0.99     NL        1.03     
!   OV        1.04     PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.115508Jy  sigma=2.462428
! Fit after  self-cal, rms=0.113966Jy  sigma=2.389551
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7171 mas, bmaj=1.845 mas, bpa=-3.348 degrees
! Estimated noise=0.487882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0058756 Jy
! Component: 100  -  total flux cleaned = 0.00754763 Jy
! Component: 150  -  total flux cleaned = 0.0078639 Jy
! Component: 200  -  total flux cleaned = 0.00822841 Jy
! Total flux subtracted in 200 components = 0.00822841 Jy
! Clean residual min=-0.008219 max=0.006962 Jy/beam
! Clean residual mean=-0.000008 rms=0.001687 Jy/beam
! Combined flux in latest and established models = 0.81894 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.818941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113097Jy  sigma=2.372094
! Fit after  self-cal, rms=0.112918Jy  sigma=2.370364
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112918Jy  sigma=2.370364
! Fit after  self-cal, rms=0.112268Jy  sigma=2.356058
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7167 mas, bmaj=1.845 mas, bpa=-3.3 degrees
! Estimated noise=0.487662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.80851e-05 Jy
! Component: 100  -  total flux cleaned = -0.000134257 Jy
! Component: 150  -  total flux cleaned = -0.000194088 Jy
! Component: 200  -  total flux cleaned = -8.57916e-05 Jy
! Total flux subtracted in 200 components = -8.57916e-05 Jy
! Clean residual min=-0.004666 max=0.004296 Jy/beam
! Clean residual mean=-0.000003 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.818855 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.818855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112177Jy  sigma=2.354723
! Fit after  self-cal, rms=0.112142Jy  sigma=2.354571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545602 Jy
! Component: 100  -  total flux cleaned = 0.000454668 Jy
! Component: 150  -  total flux cleaned = 0.000411135 Jy
! Component: 200  -  total flux cleaned = 0.000490317 Jy
! Total flux subtracted in 200 components = 0.000490317 Jy
! Clean residual min=-0.004413 max=0.004211 Jy/beam
! Clean residual mean=-0.000004 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.819345 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.819345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112098Jy  sigma=2.353962
! Fit after  self-cal, rms=0.112087Jy  sigma=2.353873
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112087Jy  sigma=2.353873
! Fit after  self-cal, rms=0.112025Jy  sigma=2.353898
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7168 mas, bmaj=1.845 mas, bpa=-3.304 degrees
! Estimated noise=0.487636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391299 Jy
! Component: 100  -  total flux cleaned = 0.000311313 Jy
! Component: 150  -  total flux cleaned = 0.000204076 Jy
! Component: 200  -  total flux cleaned = 0.000171299 Jy
! Total flux subtracted in 200 components = 0.000171299 Jy
! Clean residual min=-0.004188 max=0.004007 Jy/beam
! Clean residual mean=-0.000002 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.819516 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.819516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111994Jy  sigma=2.353469
! Fit after  self-cal, rms=0.111986Jy  sigma=2.353408
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227041 Jy
! Component: 100  -  total flux cleaned = 0.000163314 Jy
! Component: 150  -  total flux cleaned = 0.00013064 Jy
! Component: 200  -  total flux cleaned = 7.11507e-05 Jy
! Total flux subtracted in 200 components = 7.11507e-05 Jy
! Clean residual min=-0.004094 max=0.003909 Jy/beam
! Clean residual mean=-0.000002 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.819588 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.819588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111966Jy  sigma=2.353094
! Fit after  self-cal, rms=0.111961Jy  sigma=2.353051
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111961Jy  sigma=2.353051
! Fit after  self-cal, rms=0.111928Jy  sigma=2.352957
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.099 mas, bmaj=4.361 mas, bpa=-8.735 degrees
! Estimated noise=0.711491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122116 Jy
! Component: 100  -  total flux cleaned = 0.00046314 Jy
! Component: 150  -  total flux cleaned = 0.000594531 Jy
! Component: 200  -  total flux cleaned = 0.000631058 Jy
! Total flux subtracted in 200 components = 0.000631058 Jy
! Clean residual min=-0.005314 max=0.006622 Jy/beam
! Clean residual mean=-0.000004 rms=0.002152 Jy/beam
! Combined flux in latest and established models = 0.820219 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 79 components and 0.820219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111922Jy  sigma=2.352885
! Fit after  self-cal, rms=0.111913Jy  sigma=2.352739
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.8087e-05 Jy
! Component: 100  -  total flux cleaned = 0.000207425 Jy
! Component: 150  -  total flux cleaned = 0.000240873 Jy
! Component: 200  -  total flux cleaned = 0.00027048 Jy
! Total flux subtracted in 200 components = 0.00027048 Jy
! Clean residual min=-0.005294 max=0.006708 Jy/beam
! Clean residual mean=-0.000004 rms=0.002134 Jy/beam
! Combined flux in latest and established models = 0.820489 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 81 components and 0.820489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111917Jy  sigma=2.352794
! Fit after  self-cal, rms=0.111913Jy  sigma=2.352740
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7168 mas, bmaj=1.846 mas, bpa=-3.311 degrees
! Estimated noise=0.487528 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7168 x 1.846 at -3.311 degrees (North through East)
! Clean map  min=-0.0057262  max=0.74859 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111913Jy  sigma=2.352740
! Fit after  self-cal, rms=0.105040Jy  sigma=2.205738
! Inverting map and beam 
! Estimated beam: bmin=0.717 mas, bmaj=1.843 mas, bpa=-3.146 degrees
! Estimated noise=0.475568 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.013948 Jy
! Component: 100  -  total flux cleaned = -0.0149464 Jy
! Component: 150  -  total flux cleaned = -0.0148141 Jy
! Component: 200  -  total flux cleaned = -0.0148157 Jy
! Total flux subtracted in 200 components = -0.0148157 Jy
! Clean residual min=-0.006321 max=0.005528 Jy/beam
! Clean residual mean=0.000008 rms=0.001561 Jy/beam
! Combined flux in latest and established models = 0.805673 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.805673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103055Jy  sigma=2.165821
! Fit after  self-cal, rms=0.103029Jy  sigma=2.165424
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000763119 Jy
! Component: 100  -  total flux cleaned = 0.000834405 Jy
! Component: 150  -  total flux cleaned = 0.00103762 Jy
! Component: 200  -  total flux cleaned = 0.00121733 Jy
! Total flux subtracted in 200 components = 0.00121733 Jy
! Clean residual min=-0.005882 max=0.004988 Jy/beam
! Clean residual mean=0.000007 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.806891 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.806891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102921Jy  sigma=2.163423
! Fit after  self-cal, rms=0.102910Jy  sigma=2.163275
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102910Jy  sigma=2.163275
! Fit after  self-cal, rms=0.100941Jy  sigma=2.127733
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6046 mas, bmaj=1.644 mas, bpa=-2.62 degrees
! Estimated noise=0.70976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.547529 Jy
! Component: 100  -  total flux cleaned = 0.667053 Jy
! Component: 150  -  total flux cleaned = 0.70405 Jy
! Component: 200  -  total flux cleaned = 0.726639 Jy
! Total flux subtracted in 200 components = 0.726639 Jy
! Clean residual min=-0.009970 max=0.014687 Jy/beam
! Clean residual mean=0.000058 rms=0.002712 Jy/beam
! Combined flux in latest and established models = 0.726639 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.726639 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7175 mas, bmaj=1.842 mas, bpa=-3.023 degrees
! Estimated noise=0.465102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232193 Jy
! Component: 100  -  total flux cleaned = 0.0373461 Jy
! Component: 150  -  total flux cleaned = 0.0463275 Jy
! Component: 200  -  total flux cleaned = 0.05229 Jy
! Total flux subtracted in 200 components = 0.05229 Jy
! Clean residual min=-0.006861 max=0.007696 Jy/beam
! Clean residual mean=0.000028 rms=0.001784 Jy/beam
! Combined flux in latest and established models = 0.778929 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 52 components and 0.778929 Jy
! Inverting map 
! Added new window around map position (2.4, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681595 Jy
! Component: 100  -  total flux cleaned = 0.0107509 Jy
! Component: 150  -  total flux cleaned = 0.0138126 Jy
! Component: 200  -  total flux cleaned = 0.015898 Jy
! Total flux subtracted in 200 components = 0.015898 Jy
! Clean residual min=-0.005489 max=0.004927 Jy/beam
! Clean residual mean=0.000007 rms=0.001431 Jy/beam
! Combined flux in latest and established models = 0.794828 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 84 components and 0.794827 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=4.344 mas, bpa=-8.471 degrees
! Estimated noise=0.679477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175965 Jy
! Component: 100  -  total flux cleaned = 0.00295894 Jy
! Component: 150  -  total flux cleaned = 0.00393206 Jy
! Component: 200  -  total flux cleaned = 0.00482997 Jy
! Total flux subtracted in 200 components = 0.00482997 Jy
! Clean residual min=-0.008296 max=0.009316 Jy/beam
! Clean residual mean=0.000013 rms=0.002969 Jy/beam
! Combined flux in latest and established models = 0.799657 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000832076 Jy
! Component: 100  -  total flux cleaned = 0.00105158 Jy
! Component: 150  -  total flux cleaned = 0.0012543 Jy
! Component: 200  -  total flux cleaned = 0.00150031 Jy
! Total flux subtracted in 200 components = 0.00150031 Jy
! Clean residual min=-0.008033 max=0.009048 Jy/beam
! Clean residual mean=0.000009 rms=0.002882 Jy/beam
! Combined flux in latest and established models = 0.801158 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 109 components and 0.801158 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7175 mas, bmaj=1.842 mas, bpa=-3.023 degrees
! Estimated noise=0.465102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109805 Jy
! Component: 100  -  total flux cleaned = 0.00152208 Jy
! Component: 150  -  total flux cleaned = 0.00200578 Jy
! Component: 200  -  total flux cleaned = 0.00207959 Jy
! Total flux subtracted in 200 components = 0.00207959 Jy
! Clean residual min=-0.004108 max=0.004931 Jy/beam
! Clean residual mean=-0.000002 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.803237 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 124 components and 0.803237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098747Jy  sigma=2.085884
! Fit after  self-cal, rms=0.098713Jy  sigma=2.085351
wmodel /J1322-0937_X_map.mod
! wmodel: Unable to open new model file: /J1322-0937_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1322-0937_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7175 x 1.842 at -3.023 degrees (North through East)
! Clean map  min=-0.0052965  max=0.70765 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1322-0937_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.707647 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00125786 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.533255 0.533255 1.06651 2.13302 4.26604 8.53208 17.0642 34.1283 68.2567
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0037 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.707 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  562.582 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1322-0937_X_dfm.log closed on Fri May 20 00:08:56 2016