! Started logfile: /scr/pima/bg219a_uvs/J1319-0049_S_dfm.log on Fri May 20 00:08:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1319-0049_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1319-0049_S_uva.fits
! AN table 1: 41 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.810685 visibilities/baseline/integration-bin.
! Found source: J1319-0049
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2792 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1319-0049_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021114Jy  sigma=23.349530
! Fit after  self-cal, rms=0.810597Jy  sigma=18.602384
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.583 mas, bmaj=6.893 mas, bpa=-1.678 degrees
! Estimated noise=0.801713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154534 Jy
! Component: 100  -  total flux cleaned = 0.188478 Jy
! Total flux subtracted in 100 components = 0.188478 Jy
! Clean residual min=-0.023993 max=0.049666 Jy/beam
! Clean residual mean=-0.000137 rms=0.008393 Jy/beam
! Combined flux in latest and established models = 0.188478 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.188478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118018Jy  sigma=2.715308
! Fit after  self-cal, rms=0.117790Jy  sigma=2.709474
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.98 mas, bmaj=7.688 mas, bpa=-3.36 degrees
! Estimated noise=0.609992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22, -40.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604443 Jy
! Component: 100  -  total flux cleaned = 0.0923983 Jy
! Component: 150  -  total flux cleaned = 0.115235 Jy
! Component: 200  -  total flux cleaned = 0.133467 Jy
! Total flux subtracted in 200 components = 0.133467 Jy
! Clean residual min=-0.019722 max=0.022231 Jy/beam
! Clean residual mean=-0.000084 rms=0.005977 Jy/beam
! Combined flux in latest and established models = 0.321945 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 67 components and 0.321945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081266Jy  sigma=1.797286
! Fit after  self-cal, rms=0.073776Jy  sigma=1.637608
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.98 x 7.688 at -3.36 degrees (North through East)
! Clean map  min=-0.015155  max=0.20428 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     LA        0.97     MK        1.04     NL        1.02     
!   OV        0.93     PT        0.88     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     LA        1.00     MK        1.07     NL        1.04     
!   OV        0.91     PT        0.85     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     LA        1.01     MK        1.06     NL        1.10     
!   OV        0.88     PT        0.87     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.99     MK        1.04     NL        1.03     
!   OV        0.85     PT        0.85     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.073776Jy  sigma=1.637608
! Fit after  self-cal, rms=0.063650Jy  sigma=1.484273
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=7.855 mas, bpa=-2.568 degrees
! Estimated noise=0.561771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157771 Jy
! Component: 100  -  total flux cleaned = 0.022761 Jy
! Component: 150  -  total flux cleaned = 0.0235748 Jy
! Component: 200  -  total flux cleaned = 0.0240215 Jy
! Total flux subtracted in 200 components = 0.0240215 Jy
! Clean residual min=-0.008726 max=0.010939 Jy/beam
! Clean residual mean=-0.000037 rms=0.002854 Jy/beam
! Combined flux in latest and established models = 0.345966 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 101 components and 0.345966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059394Jy  sigma=1.357287
! Fit after  self-cal, rms=0.058946Jy  sigma=1.345108
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058946Jy  sigma=1.345108
! Fit after  self-cal, rms=0.058071Jy  sigma=1.329333
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.842 mas, bpa=-2.448 degrees
! Estimated noise=0.561323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437405 Jy
! Component: 100  -  total flux cleaned = 0.00437188 Jy
! Component: 150  -  total flux cleaned = 0.0042109 Jy
! Component: 200  -  total flux cleaned = 0.00422139 Jy
! Total flux subtracted in 200 components = 0.00422139 Jy
! Clean residual min=-0.007729 max=0.009317 Jy/beam
! Clean residual mean=-0.000030 rms=0.002443 Jy/beam
! Combined flux in latest and established models = 0.350188 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 114 components and 0.350188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057067Jy  sigma=1.300171
! Fit after  self-cal, rms=0.056942Jy  sigma=1.298097
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474531 Jy
! Component: 100  -  total flux cleaned = 0.000585733 Jy
! Component: 150  -  total flux cleaned = 0.000783534 Jy
! Component: 200  -  total flux cleaned = 0.000787056 Jy
! Total flux subtracted in 200 components = 0.000787056 Jy
! Clean residual min=-0.007726 max=0.008549 Jy/beam
! Clean residual mean=-0.000023 rms=0.002334 Jy/beam
! Combined flux in latest and established models = 0.350975 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.350975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056608Jy  sigma=1.288685
! Fit after  self-cal, rms=0.056583Jy  sigma=1.288203
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056583Jy  sigma=1.288203
! Fit after  self-cal, rms=0.056476Jy  sigma=1.285280
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=7.843 mas, bpa=-2.402 degrees
! Estimated noise=0.559575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146543 Jy
! Component: 100  -  total flux cleaned = 0.00156397 Jy
! Component: 150  -  total flux cleaned = 0.00140335 Jy
! Component: 200  -  total flux cleaned = 0.00133043 Jy
! Total flux subtracted in 200 components = 0.00133043 Jy
! Clean residual min=-0.007151 max=0.008365 Jy/beam
! Clean residual mean=-0.000022 rms=0.002211 Jy/beam
! Combined flux in latest and established models = 0.352305 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.352305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056234Jy  sigma=1.278361
! Fit after  self-cal, rms=0.056226Jy  sigma=1.278068
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319287 Jy
! Component: 100  -  total flux cleaned = 0.000248805 Jy
! Component: 150  -  total flux cleaned = 0.000181515 Jy
! Component: 200  -  total flux cleaned = -7.88257e-07 Jy
! Total flux subtracted in 200 components = -7.88257e-07 Jy
! Clean residual min=-0.007183 max=0.008022 Jy/beam
! Clean residual mean=-0.000020 rms=0.002170 Jy/beam
! Combined flux in latest and established models = 0.352304 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.352304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056090Jy  sigma=1.274309
! Fit after  self-cal, rms=0.056085Jy  sigma=1.274148
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056085Jy  sigma=1.274148
! Fit after  self-cal, rms=0.056006Jy  sigma=1.273488
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.598 mas, bmaj=15.76 mas, bpa=-5.885 degrees
! Estimated noise=0.692888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930054 Jy
! Component: 100  -  total flux cleaned = -0.000425705 Jy
! Component: 150  -  total flux cleaned = -0.000785944 Jy
! Component: 200  -  total flux cleaned = -0.00134389 Jy
! Total flux subtracted in 200 components = -0.00134389 Jy
! Clean residual min=-0.011464 max=0.010275 Jy/beam
! Clean residual mean=-0.000026 rms=0.003643 Jy/beam
! Combined flux in latest and established models = 0.35096 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 145 components and 0.35096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056116Jy  sigma=1.274330
! Fit after  self-cal, rms=0.056116Jy  sigma=1.273174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.78747e-05 Jy
! Component: 100  -  total flux cleaned = -0.00017842 Jy
! Component: 150  -  total flux cleaned = -0.000182306 Jy
! Component: 200  -  total flux cleaned = -0.000356222 Jy
! Total flux subtracted in 200 components = -0.000356222 Jy
! Clean residual min=-0.011246 max=0.009454 Jy/beam
! Clean residual mean=-0.000025 rms=0.003459 Jy/beam
! Combined flux in latest and established models = 0.350604 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 147 components and 0.350604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056238Jy  sigma=1.275228
! Fit after  self-cal, rms=0.056249Jy  sigma=1.274928
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=7.841 mas, bpa=-2.38 degrees
! Estimated noise=0.558492 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.077 x 7.841 at -2.38 degrees (North through East)
! Clean map  min=-0.016159  max=0.19361 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.65 mas, bmaj=6.974 mas, bpa=-0.8557 degrees
! Estimated noise=0.74721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144998 Jy
! Component: 100  -  total flux cleaned = 0.199902 Jy
! Component: 150  -  total flux cleaned = 0.234819 Jy
! Component: 200  -  total flux cleaned = 0.25989 Jy
! Total flux subtracted in 200 components = 0.25989 Jy
! Clean residual min=-0.015040 max=0.015544 Jy/beam
! Clean residual mean=-0.000067 rms=0.004033 Jy/beam
! Combined flux in latest and established models = 0.25989 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.25989 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=7.841 mas, bpa=-2.38 degrees
! Estimated noise=0.558492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250922 Jy
! Component: 100  -  total flux cleaned = 0.041939 Jy
! Component: 150  -  total flux cleaned = 0.0545462 Jy
! Component: 200  -  total flux cleaned = 0.0628448 Jy
! Total flux subtracted in 200 components = 0.0628448 Jy
! Clean residual min=-0.009442 max=0.011418 Jy/beam
! Clean residual mean=-0.000045 rms=0.003092 Jy/beam
! Combined flux in latest and established models = 0.322735 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 95 components and 0.322735 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.598 mas, bmaj=15.76 mas, bpa=-5.885 degrees
! Estimated noise=0.692888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103572 Jy
! Component: 100  -  total flux cleaned = 0.0138568 Jy
! Component: 150  -  total flux cleaned = 0.0169464 Jy
! Component: 200  -  total flux cleaned = 0.0198095 Jy
! Total flux subtracted in 200 components = 0.0198095 Jy
! Clean residual min=-0.012375 max=0.012406 Jy/beam
! Clean residual mean=-0.000041 rms=0.004128 Jy/beam
! Combined flux in latest and established models = 0.342544 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243158 Jy
! Component: 100  -  total flux cleaned = 0.00450846 Jy
! Component: 150  -  total flux cleaned = 0.00612949 Jy
! Component: 200  -  total flux cleaned = 0.00726095 Jy
! Total flux subtracted in 200 components = 0.00726095 Jy
! Clean residual min=-0.011692 max=0.010960 Jy/beam
! Clean residual mean=-0.000030 rms=0.003698 Jy/beam
! Combined flux in latest and established models = 0.349805 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 120 components and 0.349805 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=7.841 mas, bpa=-2.38 degrees
! Estimated noise=0.558492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973101 Jy
! Component: 100  -  total flux cleaned = 0.0014669 Jy
! Component: 150  -  total flux cleaned = 0.00159543 Jy
! Component: 200  -  total flux cleaned = 0.00170176 Jy
! Total flux subtracted in 200 components = 0.00170176 Jy
! Clean residual min=-0.008343 max=0.007332 Jy/beam
! Clean residual mean=-0.000018 rms=0.002087 Jy/beam
! Combined flux in latest and established models = 0.351507 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 132 components and 0.351507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056531Jy  sigma=1.276958
! Fit after  self-cal, rms=0.056392Jy  sigma=1.275179
wmodel /J1319-0049_S_map.mod
! wmodel: Unable to open new model file: /J1319-0049_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1319-0049_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.077 x 7.841 at -2.38 degrees (North through East)
! Clean map  min=-0.015048  max=0.1908 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1319-0049_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.190796 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00209013 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.28644 3.28644 6.57288 13.1458 26.2915 52.583
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0062 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  91.284 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1319-0049_S_dfm.log closed on Fri May 20 00:08:45 2016