! Started logfile: /scr/pima/bg219a_uvs/J1318-0607_X_dfm.log on Fri May 20 00:08:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1318-0607_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1318-0607_X_uva.fits
! AN table 1: 47 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.816616 visibilities/baseline/integration-bin.
! Found source: J1318-0607
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 9672 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1318-0607_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048086Jy  sigma=28.142270
! Fit after  self-cal, rms=0.708280Jy  sigma=18.660911
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6217 mas, bmaj=1.662 mas, bpa=-0.6981 degrees
! Estimated noise=0.488671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212703 Jy
! Component: 100  -  total flux cleaned = 0.273029 Jy
! Total flux subtracted in 100 components = 0.273029 Jy
! Clean residual min=-0.014671 max=0.025438 Jy/beam
! Clean residual mean=0.000032 rms=0.003888 Jy/beam
! Combined flux in latest and established models = 0.273029 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.273029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086757Jy  sigma=2.363687
! Fit after  self-cal, rms=0.086640Jy  sigma=2.359662
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285873 Jy
! Component: 100  -  total flux cleaned = 0.0479023 Jy
! Total flux subtracted in 100 components = 0.0479023 Jy
! Clean residual min=-0.009255 max=0.010889 Jy/beam
! Clean residual mean=0.000017 rms=0.002119 Jy/beam
! Combined flux in latest and established models = 0.320931 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 27 components and 0.320931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069038Jy  sigma=1.838703
! Fit after  self-cal, rms=0.069031Jy  sigma=1.837915
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7761 mas, bmaj=1.929 mas, bpa=-2.157 degrees
! Estimated noise=0.277783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022206 Jy
! Component: 100  -  total flux cleaned = 0.0340139 Jy
! Component: 150  -  total flux cleaned = 0.0405798 Jy
! Component: 200  -  total flux cleaned = 0.0442905 Jy
! Total flux subtracted in 200 components = 0.0442905 Jy
! Clean residual min=-0.005128 max=0.006185 Jy/beam
! Clean residual mean=0.000013 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.365222 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.365222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062149Jy  sigma=1.637898
! Fit after  self-cal, rms=0.062147Jy  sigma=1.637375
! Inverting map 
! Added new window around map position (0.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501413 Jy
! Component: 100  -  total flux cleaned = 0.00592314 Jy
! Component: 150  -  total flux cleaned = 0.00606759 Jy
! Component: 200  -  total flux cleaned = 0.00612915 Jy
! Total flux subtracted in 200 components = 0.00612915 Jy
! Clean residual min=-0.004035 max=0.003938 Jy/beam
! Clean residual mean=0.000007 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.371351 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.371351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061727Jy  sigma=1.625569
! Fit after  self-cal, rms=0.061692Jy  sigma=1.624418
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7761 x 1.929 at -2.157 degrees (North through East)
! Clean map  min=-0.0035833  max=0.29353 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.00     NL        1.01     
!   OV        1.01     PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        1.01     NL        1.02     
!   OV        1.01     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.01     NL        1.00     
!   OV        1.01     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.00     NL        1.03     
!   OV        0.99     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.00     NL        1.02     
!   OV        1.01     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        1.00     MK        1.00     NL        1.01     
!   OV        1.01     PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        0.99     NL        1.02     
!   OV        1.00     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.00     NL        1.02     
!   OV        1.02     PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        1.00     NL        1.02     
!   OV        1.01     PT        0.99     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.98     MK        1.02     NL        1.00     
!   OV        1.01     PT        0.99     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        1.00     MK        0.98     NL        0.99     
!   OV        1.03     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        0.99     NL        1.01     
!   OV        1.02     PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.061692Jy  sigma=1.624418
! Fit after  self-cal, rms=0.061517Jy  sigma=1.617092
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.777 mas, bmaj=1.933 mas, bpa=-2.181 degrees
! Estimated noise=0.27768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100216 Jy
! Component: 100  -  total flux cleaned = -0.00121496 Jy
! Component: 150  -  total flux cleaned = -0.00128718 Jy
! Component: 200  -  total flux cleaned = -0.00135454 Jy
! Total flux subtracted in 200 components = -0.00135454 Jy
! Clean residual min=-0.002879 max=0.002665 Jy/beam
! Clean residual mean=0.000000 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.369996 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.369996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061465Jy  sigma=1.615900
! Fit after  self-cal, rms=0.061462Jy  sigma=1.615786
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061462Jy  sigma=1.615786
! Fit after  self-cal, rms=0.061440Jy  sigma=1.609438
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7767 mas, bmaj=1.938 mas, bpa=-2.194 degrees
! Estimated noise=0.277914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110986 Jy
! Component: 100  -  total flux cleaned = -0.00130168 Jy
! Component: 150  -  total flux cleaned = -0.0013323 Jy
! Component: 200  -  total flux cleaned = -0.0013883 Jy
! Total flux subtracted in 200 components = -0.0013883 Jy
! Clean residual min=-0.002400 max=0.002266 Jy/beam
! Clean residual mean=0.000006 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.368608 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.368608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061397Jy  sigma=1.608453
! Fit after  self-cal, rms=0.061398Jy  sigma=1.608397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137094 Jy
! Component: 100  -  total flux cleaned = -0.000185746 Jy
! Component: 150  -  total flux cleaned = -0.00025211 Jy
! Component: 200  -  total flux cleaned = -0.000292963 Jy
! Total flux subtracted in 200 components = -0.000292963 Jy
! Clean residual min=-0.002333 max=0.002179 Jy/beam
! Clean residual mean=0.000006 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.368315 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.368315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061380Jy  sigma=1.608027
! Fit after  self-cal, rms=0.061381Jy  sigma=1.608007
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061381Jy  sigma=1.608007
! Fit after  self-cal, rms=0.061419Jy  sigma=1.607821
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.777 mas, bmaj=1.939 mas, bpa=-2.207 degrees
! Estimated noise=0.27799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000820762 Jy
! Component: 100  -  total flux cleaned = -0.000984075 Jy
! Component: 150  -  total flux cleaned = -0.00106144 Jy
! Component: 200  -  total flux cleaned = -0.00111443 Jy
! Total flux subtracted in 200 components = -0.00111443 Jy
! Clean residual min=-0.002270 max=0.002106 Jy/beam
! Clean residual mean=0.000006 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.3672 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 0.3672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061403Jy  sigma=1.607457
! Fit after  self-cal, rms=0.061403Jy  sigma=1.607436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123699 Jy
! Component: 100  -  total flux cleaned = -0.000188462 Jy
! Component: 150  -  total flux cleaned = -0.000249246 Jy
! Component: 200  -  total flux cleaned = -0.00030693 Jy
! Total flux subtracted in 200 components = -0.00030693 Jy
! Clean residual min=-0.002230 max=0.002075 Jy/beam
! Clean residual mean=0.000006 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.366894 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.366893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061395Jy  sigma=1.607274
! Fit after  self-cal, rms=0.061395Jy  sigma=1.607258
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061395Jy  sigma=1.607258
! Fit after  self-cal, rms=0.061403Jy  sigma=1.607163
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=4.479 mas, bpa=-7.689 degrees
! Estimated noise=0.381928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000755185 Jy
! Component: 100  -  total flux cleaned = -0.000958298 Jy
! Component: 150  -  total flux cleaned = -0.00101768 Jy
! Component: 200  -  total flux cleaned = -0.00106966 Jy
! Total flux subtracted in 200 components = -0.00106966 Jy
! Clean residual min=-0.002926 max=0.002686 Jy/beam
! Clean residual mean=0.000015 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.365824 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 109 components and 0.365824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061397Jy  sigma=1.607061
! Fit after  self-cal, rms=0.061396Jy  sigma=1.607019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.69933e-05 Jy
! Component: 100  -  total flux cleaned = -6.05581e-05 Jy
! Component: 150  -  total flux cleaned = -0.000109276 Jy
! Component: 200  -  total flux cleaned = -0.00015222 Jy
! Total flux subtracted in 200 components = -0.00015222 Jy
! Clean residual min=-0.002891 max=0.002698 Jy/beam
! Clean residual mean=0.000016 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.365672 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 112 components and 0.365672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061395Jy  sigma=1.607016
! Fit after  self-cal, rms=0.061393Jy  sigma=1.606974
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=1.941 mas, bpa=-2.211 degrees
! Estimated noise=0.277972 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7771 x 1.941 at -2.211 degrees (North through East)
! Clean map  min=-0.0020019  max=0.29385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6219 mas, bmaj=1.672 mas, bpa=-0.8395 degrees
! Estimated noise=0.491145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.213825 Jy
! Component: 100  -  total flux cleaned = 0.273408 Jy
! Component: 150  -  total flux cleaned = 0.301522 Jy
! Component: 200  -  total flux cleaned = 0.320355 Jy
! Total flux subtracted in 200 components = 0.320355 Jy
! Clean residual min=-0.008307 max=0.010449 Jy/beam
! Clean residual mean=0.000016 rms=0.001966 Jy/beam
! Combined flux in latest and established models = 0.320355 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.320355 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=1.941 mas, bpa=-2.211 degrees
! Estimated noise=0.277972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214742 Jy
! Component: 100  -  total flux cleaned = 0.0328482 Jy
! Component: 150  -  total flux cleaned = 0.0390934 Jy
! Component: 200  -  total flux cleaned = 0.0427998 Jy
! Total flux subtracted in 200 components = 0.0427998 Jy
! Clean residual min=-0.003220 max=0.002717 Jy/beam
! Clean residual mean=0.000010 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.363155 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 46 components and 0.363155 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=4.479 mas, bpa=-7.689 degrees
! Estimated noise=0.381928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313895 Jy
! Component: 100  -  total flux cleaned = 0.00364216 Jy
! Component: 150  -  total flux cleaned = 0.00364048 Jy
! Component: 200  -  total flux cleaned = 0.00363603 Jy
! Total flux subtracted in 200 components = 0.00363603 Jy
! Clean residual min=-0.003116 max=0.003005 Jy/beam
! Clean residual mean=0.000014 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.366791 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.73596e-05 Jy
! Component: 100  -  total flux cleaned = -4.71032e-05 Jy
! Component: 150  -  total flux cleaned = -6.28217e-05 Jy
! Component: 200  -  total flux cleaned = -7.67318e-05 Jy
! Total flux subtracted in 200 components = -7.67318e-05 Jy
! Clean residual min=-0.003070 max=0.002913 Jy/beam
! Clean residual mean=0.000013 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.366714 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 72 components and 0.366714 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=1.941 mas, bpa=-2.211 degrees
! Estimated noise=0.277972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176669 Jy
! Component: 100  -  total flux cleaned = 8.1012e-05 Jy
! Component: 150  -  total flux cleaned = 5.75663e-06 Jy
! Component: 200  -  total flux cleaned = -2.74756e-05 Jy
! Total flux subtracted in 200 components = -2.74756e-05 Jy
! Clean residual min=-0.002447 max=0.002357 Jy/beam
! Clean residual mean=0.000005 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.366687 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 81 components and 0.366687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061467Jy  sigma=1.608692
! Fit after  self-cal, rms=0.061463Jy  sigma=1.608634
wmodel /J1318-0607_X_map.mod
! wmodel: Unable to open new model file: /J1318-0607_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1318-0607_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7771 x 1.941 at -2.211 degrees (North through East)
! Clean map  min=-0.0021631  max=0.29406 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1318-0607_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.294056 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000515637 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.526061 0.526061 1.05212 2.10424 4.20849 8.41697 16.8339 33.6679 67.3358
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.294 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  570.276 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1318-0607_X_dfm.log closed on Fri May 20 00:08:41 2016