! Started logfile: /scr/pima/bg219a_uvs/J1318-0607_S_dfm.log on Fri May 20 00:08:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1318-0607_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1318-0607_S_uva.fits
! AN table 1: 47 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.816616 visibilities/baseline/integration-bin.
! Found source: J1318-0607
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1318-0607_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.076744Jy  sigma=21.368559
! Fit after  self-cal, rms=0.863918Jy  sigma=17.766019
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=6.554 mas, bpa=-3.656 degrees
! Estimated noise=0.907068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131628 Jy
! Component: 100  -  total flux cleaned = 0.160336 Jy
! Total flux subtracted in 100 components = 0.160336 Jy
! Clean residual min=-0.007918 max=0.010074 Jy/beam
! Clean residual mean=0.000005 rms=0.002494 Jy/beam
! Combined flux in latest and established models = 0.160336 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.160336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.358357Jy  sigma=1.438153
! Fit after  self-cal, rms=0.358361Jy  sigma=1.438067
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.868 mas, bmaj=7.429 mas, bpa=-4.429 degrees
! Estimated noise=0.641986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080386 Jy
! Component: 100  -  total flux cleaned = 0.0113382 Jy
! Component: 150  -  total flux cleaned = 0.0130156 Jy
! Component: 200  -  total flux cleaned = 0.0132361 Jy
! Total flux subtracted in 200 components = 0.0132361 Jy
! Clean residual min=-0.008758 max=0.009081 Jy/beam
! Clean residual mean=0.000005 rms=0.002364 Jy/beam
! Combined flux in latest and established models = 0.173572 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.173572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.356898Jy  sigma=1.445725
! Fit after  self-cal, rms=0.356875Jy  sigma=1.445578
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.868 x 7.429 at -4.429 degrees (North through East)
! Clean map  min=-0.0084665  max=0.16937 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        1.07     MK        1.03     NL        1.04     
!   OV        1.08     PT        1.07     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     LA        1.09     MK        0.99     NL        1.07     
!   OV        1.04     PT        1.06     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     LA        1.00     MK        0.96     NL        0.92     
!   OV        1.02     PT        1.05     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.356875Jy  sigma=1.445578
! Fit after  self-cal, rms=0.357450Jy  sigma=1.414304
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.844 mas, bmaj=7.404 mas, bpa=-4.66 degrees
! Estimated noise=0.667566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630875 Jy
! Component: 100  -  total flux cleaned = 0.00890099 Jy
! Component: 150  -  total flux cleaned = 0.0103193 Jy
! Component: 200  -  total flux cleaned = 0.0106594 Jy
! Total flux subtracted in 200 components = 0.0106594 Jy
! Clean residual min=-0.009346 max=0.007475 Jy/beam
! Clean residual mean=0.000002 rms=0.002308 Jy/beam
! Combined flux in latest and established models = 0.184232 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.184232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.356385Jy  sigma=1.419859
! Fit after  self-cal, rms=0.356442Jy  sigma=1.419702
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.356442Jy  sigma=1.419702
! Fit after  self-cal, rms=0.356759Jy  sigma=1.405483
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.824 mas, bmaj=7.396 mas, bpa=-4.783 degrees
! Estimated noise=0.695154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00640526 Jy
! Component: 100  -  total flux cleaned = 0.00883706 Jy
! Component: 150  -  total flux cleaned = 0.010152 Jy
! Component: 200  -  total flux cleaned = 0.0107296 Jy
! Total flux subtracted in 200 components = 0.0107296 Jy
! Clean residual min=-0.009791 max=0.007234 Jy/beam
! Clean residual mean=0.000000 rms=0.002285 Jy/beam
! Combined flux in latest and established models = 0.194961 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.194961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355692Jy  sigma=1.410476
! Fit after  self-cal, rms=0.355681Jy  sigma=1.410419
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.44402e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113899 Jy
! Component: 150  -  total flux cleaned = 0.000137002 Jy
! Component: 200  -  total flux cleaned = 0.000159182 Jy
! Total flux subtracted in 200 components = 0.000159182 Jy
! Clean residual min=-0.009855 max=0.007266 Jy/beam
! Clean residual mean=0.000000 rms=0.002287 Jy/beam
! Combined flux in latest and established models = 0.19512 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.19512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355652Jy  sigma=1.410581
! Fit after  self-cal, rms=0.355657Jy  sigma=1.410572
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355657Jy  sigma=1.410572
! Fit after  self-cal, rms=0.355956Jy  sigma=1.403358
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=7.375 mas, bpa=-4.862 degrees
! Estimated noise=0.717969 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00532097 Jy
! Component: 100  -  total flux cleaned = 0.00742536 Jy
! Component: 150  -  total flux cleaned = 0.00859073 Jy
! Component: 200  -  total flux cleaned = 0.00921657 Jy
! Total flux subtracted in 200 components = 0.00921657 Jy
! Clean residual min=-0.010380 max=0.007357 Jy/beam
! Clean residual mean=-0.000002 rms=0.002372 Jy/beam
! Combined flux in latest and established models = 0.204337 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.204337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355091Jy  sigma=1.408332
! Fit after  self-cal, rms=0.355077Jy  sigma=1.408317
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.79024e-05 Jy
! Component: 100  -  total flux cleaned = 0.000137909 Jy
! Component: 150  -  total flux cleaned = 0.00017625 Jy
! Component: 200  -  total flux cleaned = 0.000194859 Jy
! Total flux subtracted in 200 components = 0.000194859 Jy
! Clean residual min=-0.010442 max=0.007366 Jy/beam
! Clean residual mean=-0.000002 rms=0.002374 Jy/beam
! Combined flux in latest and established models = 0.204532 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 46 components and 0.204532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355053Jy  sigma=1.408485
! Fit after  self-cal, rms=0.355057Jy  sigma=1.408477
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.355057Jy  sigma=1.408477
! Fit after  self-cal, rms=0.355322Jy  sigma=1.403818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.091 mas, bmaj=15.08 mas, bpa=-8.189 degrees
! Estimated noise=1.06345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550824 Jy
! Component: 100  -  total flux cleaned = 0.00708898 Jy
! Component: 150  -  total flux cleaned = 0.00708763 Jy
! Component: 200  -  total flux cleaned = 0.00704516 Jy
! Total flux subtracted in 200 components = 0.00704516 Jy
! Clean residual min=-0.015022 max=0.008670 Jy/beam
! Clean residual mean=-0.000009 rms=0.004076 Jy/beam
! Combined flux in latest and established models = 0.211577 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.211577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354656Jy  sigma=1.409006
! Fit after  self-cal, rms=0.354645Jy  sigma=1.408957
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128522 Jy
! Component: 100  -  total flux cleaned = 8.9651e-05 Jy
! Component: 150  -  total flux cleaned = 4.99327e-05 Jy
! Component: 200  -  total flux cleaned = 1.145e-05 Jy
! Total flux subtracted in 200 components = 1.145e-05 Jy
! Clean residual min=-0.014993 max=0.008673 Jy/beam
! Clean residual mean=-0.000009 rms=0.004064 Jy/beam
! Combined flux in latest and established models = 0.211588 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 55 components and 0.211588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354614Jy  sigma=1.410042
! Fit after  self-cal, rms=0.354619Jy  sigma=1.410026
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.793 mas, bmaj=7.357 mas, bpa=-4.914 degrees
! Estimated noise=0.736454 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.793 x 7.357 at -4.914 degrees (North through East)
! Clean map  min=-0.011264  max=0.19451 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.356 mas, bmaj=6.543 mas, bpa=-4.317 degrees
! Estimated noise=1.01965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147905 Jy
! Component: 100  -  total flux cleaned = 0.18118 Jy
! Component: 150  -  total flux cleaned = 0.193775 Jy
! Component: 200  -  total flux cleaned = 0.200038 Jy
! Total flux subtracted in 200 components = 0.200038 Jy
! Clean residual min=-0.010613 max=0.008164 Jy/beam
! Clean residual mean=0.000000 rms=0.002620 Jy/beam
! Combined flux in latest and established models = 0.200038 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.200038 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.793 mas, bmaj=7.357 mas, bpa=-4.914 degrees
! Estimated noise=0.736454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00604006 Jy
! Component: 100  -  total flux cleaned = 0.00919895 Jy
! Component: 150  -  total flux cleaned = 0.0109784 Jy
! Component: 200  -  total flux cleaned = 0.0119872 Jy
! Total flux subtracted in 200 components = 0.0119872 Jy
! Clean residual min=-0.010944 max=0.007495 Jy/beam
! Clean residual mean=-0.000003 rms=0.002455 Jy/beam
! Combined flux in latest and established models = 0.212025 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.212025 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.091 mas, bmaj=15.08 mas, bpa=-8.189 degrees
! Estimated noise=1.06345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000299484 Jy
! Component: 100  -  total flux cleaned = -0.000350849 Jy
! Component: 150  -  total flux cleaned = -0.000436813 Jy
! Component: 200  -  total flux cleaned = -0.000477674 Jy
! Total flux subtracted in 200 components = -0.000477674 Jy
! Clean residual min=-0.015029 max=0.008638 Jy/beam
! Clean residual mean=-0.000009 rms=0.004079 Jy/beam
! Combined flux in latest and established models = 0.211548 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.16444e-05 Jy
! Component: 100  -  total flux cleaned = -8.15027e-05 Jy
! Component: 150  -  total flux cleaned = -0.000119842 Jy
! Component: 200  -  total flux cleaned = -0.000159783 Jy
! Total flux subtracted in 200 components = -0.000159783 Jy
! Clean residual min=-0.014999 max=0.008629 Jy/beam
! Clean residual mean=-0.000009 rms=0.004066 Jy/beam
! Combined flux in latest and established models = 0.211388 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 36 components and 0.211388 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.793 mas, bmaj=7.357 mas, bpa=-4.914 degrees
! Estimated noise=0.736454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962668 Jy
! Component: 100  -  total flux cleaned = 0.00110061 Jy
! Component: 150  -  total flux cleaned = 0.00106893 Jy
! Component: 200  -  total flux cleaned = 0.00104783 Jy
! Total flux subtracted in 200 components = 0.00104783 Jy
! Clean residual min=-0.011205 max=0.007371 Jy/beam
! Clean residual mean=-0.000004 rms=0.002457 Jy/beam
! Combined flux in latest and established models = 0.212436 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.212436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354585Jy  sigma=1.409042
! Fit after  self-cal, rms=0.354585Jy  sigma=1.409005
wmodel /J1318-0607_S_map.mod
! wmodel: Unable to open new model file: /J1318-0607_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1318-0607_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.793 x 7.357 at -4.914 degrees (North through East)
! Clean map  min=-0.011214  max=0.19401 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1318-0607_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.194011 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00245772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.80039 3.80039 7.60077 15.2015 30.4031 60.8062
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0073 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.194 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  78.939 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1318-0607_S_dfm.log closed on Fri May 20 00:08:38 2016