! Started logfile: /scr/pima/bg219a_uvs/J1317-2031_X_dfm.log on Fri May 20 00:08:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1317-2031_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1317-2031_X_uva.fits
! AN table 1: 57 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.92147 visibilities/baseline/integration-bin.
! Found source: J1317-2031
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 13236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1317-2031_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000474Jy  sigma=26.891374
! Fit after  self-cal, rms=0.894834Jy  sigma=23.989925
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5681 mas, bmaj=1.606 mas, bpa=-2.867 degrees
! Estimated noise=0.450393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0783559 Jy
! Component: 100  -  total flux cleaned = 0.0968021 Jy
! Total flux subtracted in 100 components = 0.0968021 Jy
! Clean residual min=-0.004420 max=0.007077 Jy/beam
! Clean residual mean=-0.000002 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.0968021 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0968021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053676Jy  sigma=1.405663
! Fit after  self-cal, rms=0.053609Jy  sigma=1.403555
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00778582 Jy
! Component: 100  -  total flux cleaned = 0.0125793 Jy
! Total flux subtracted in 100 components = 0.0125793 Jy
! Clean residual min=-0.002962 max=0.004028 Jy/beam
! Clean residual mean=-0.000001 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.109381 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.109381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051723Jy  sigma=1.344437
! Fit after  self-cal, rms=0.051738Jy  sigma=1.343774
! Inverting map 
! Added new window around map position (0.8, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405126 Jy
! Component: 100  -  total flux cleaned = 0.00636822 Jy
! Total flux subtracted in 100 components = 0.00636822 Jy
! Clean residual min=-0.002532 max=0.002633 Jy/beam
! Clean residual mean=-0.000000 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.11575 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 31 components and 0.11575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051254Jy  sigma=1.328622
! Fit after  self-cal, rms=0.051238Jy  sigma=1.327829
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7452 mas, bmaj=1.918 mas, bpa=-2.941 degrees
! Estimated noise=0.235984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037002 Jy
! Component: 100  -  total flux cleaned = 0.00571299 Jy
! Component: 150  -  total flux cleaned = 0.0069709 Jy
! Component: 200  -  total flux cleaned = 0.00778052 Jy
! Total flux subtracted in 200 components = 0.00778052 Jy
! Clean residual min=-0.002094 max=0.002170 Jy/beam
! Clean residual mean=-0.000001 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.12353 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 0.12353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050994Jy  sigma=1.319915
! Fit after  self-cal, rms=0.050973Jy  sigma=1.319163
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7452 x 1.918 at -2.941 degrees (North through East)
! Clean map  min=-0.0018875  max=0.10336 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        1.02     MK        0.97     NL        1.03     
!   OV        1.04     PT        0.96     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.96     MK        0.99     NL        1.02     
!   OV        1.07     PT        0.93     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.98     MK        1.05     NL        1.02     
!   OV        1.04     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.00     NL        1.03     
!   OV        1.03     PT        1.00     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.96     MK        1.01     NL        1.04     
!   OV        1.03     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.99     MK        1.05     NL        0.97     
!   OV        1.03     PT        0.98     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        1.01     NL        1.03     
!   OV        0.99     PT        1.00     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        1.01     NL        1.01     
!   OV        0.98     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.96     MK        0.97     NL        0.98     
!   OV        1.04     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        0.98     NL        0.99     
!   OV        0.98     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        0.98     NL        1.00     
!   OV        1.01     PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.95     MK        0.98     NL        1.03     
!   OV        0.99     PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.050973Jy  sigma=1.319163
! Fit after  self-cal, rms=0.050656Jy  sigma=1.314488
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7455 mas, bmaj=1.919 mas, bpa=-2.908 degrees
! Estimated noise=0.235328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474741 Jy
! Component: 100  -  total flux cleaned = 0.000528579 Jy
! Component: 150  -  total flux cleaned = 0.000528458 Jy
! Component: 200  -  total flux cleaned = 0.000543093 Jy
! Total flux subtracted in 200 components = 0.000543093 Jy
! Clean residual min=-0.001693 max=0.001756 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.124073 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.124073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050644Jy  sigma=1.314155
! Fit after  self-cal, rms=0.050643Jy  sigma=1.314045
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050643Jy  sigma=1.314045
! Fit after  self-cal, rms=0.050660Jy  sigma=1.311203
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7456 mas, bmaj=1.921 mas, bpa=-2.888 degrees
! Estimated noise=0.235707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319029 Jy
! Component: 100  -  total flux cleaned = 0.000362276 Jy
! Component: 150  -  total flux cleaned = 0.000397689 Jy
! Component: 200  -  total flux cleaned = 0.000397394 Jy
! Total flux subtracted in 200 components = 0.000397394 Jy
! Clean residual min=-0.001452 max=0.001559 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.124471 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 59 components and 0.124471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050652Jy  sigma=1.310983
! Fit after  self-cal, rms=0.050653Jy  sigma=1.310916
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46, -38.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123 Jy
! Component: 100  -  total flux cleaned = 0.00169111 Jy
! Component: 150  -  total flux cleaned = 0.00184126 Jy
! Component: 200  -  total flux cleaned = 0.00190041 Jy
! Total flux subtracted in 200 components = 0.00190041 Jy
! Clean residual min=-0.001289 max=0.001453 Jy/beam
! Clean residual mean=0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.126371 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.126371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050622Jy  sigma=1.310061
! Fit after  self-cal, rms=0.050619Jy  sigma=1.309998
! Inverting map 
! Added new window around map position (8.2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121519 Jy
! Component: 100  -  total flux cleaned = 0.00177308 Jy
! Component: 150  -  total flux cleaned = 0.00209706 Jy
! Component: 200  -  total flux cleaned = 0.00228966 Jy
! Total flux subtracted in 200 components = 0.00228966 Jy
! Clean residual min=-0.001251 max=0.001181 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.128661 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.128661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050589Jy  sigma=1.309165
! Fit after  self-cal, rms=0.050587Jy  sigma=1.309108
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050587Jy  sigma=1.309108
! Fit after  self-cal, rms=0.050576Jy  sigma=1.308782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7463 mas, bmaj=1.923 mas, bpa=-2.891 degrees
! Estimated noise=0.235554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051163 Jy
! Component: 100  -  total flux cleaned = 0.000653111 Jy
! Component: 150  -  total flux cleaned = 0.000694498 Jy
! Component: 200  -  total flux cleaned = 0.000759097 Jy
! Total flux subtracted in 200 components = 0.000759097 Jy
! Clean residual min=-0.001194 max=0.001122 Jy/beam
! Clean residual mean=0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.12942 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.12942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050568Jy  sigma=1.308542
! Fit after  self-cal, rms=0.050569Jy  sigma=1.308525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121498 Jy
! Component: 100  -  total flux cleaned = 0.000157635 Jy
! Component: 150  -  total flux cleaned = 0.000191906 Jy
! Component: 200  -  total flux cleaned = 0.000224701 Jy
! Total flux subtracted in 200 components = 0.000224701 Jy
! Clean residual min=-0.001185 max=0.001123 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.129644 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.129644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050565Jy  sigma=1.308406
! Fit after  self-cal, rms=0.050564Jy  sigma=1.308400
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050564Jy  sigma=1.308400
! Fit after  self-cal, rms=0.050572Jy  sigma=1.308380
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=5.545 mas, bpa=-1.689 degrees
! Estimated noise=0.315257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145045 Jy
! Component: 100  -  total flux cleaned = 7.24474e-05 Jy
! Component: 150  -  total flux cleaned = 4.26038e-05 Jy
! Component: 200  -  total flux cleaned = 6.63742e-06 Jy
! Total flux subtracted in 200 components = 6.63742e-06 Jy
! Clean residual min=-0.001404 max=0.001224 Jy/beam
! Clean residual mean=0.000000 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.129651 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 112 components and 0.129651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050575Jy  sigma=1.308423
! Fit after  self-cal, rms=0.050574Jy  sigma=1.308400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109266 Jy
! Component: 100  -  total flux cleaned = 8.4615e-05 Jy
! Component: 150  -  total flux cleaned = 5.51194e-05 Jy
! Component: 200  -  total flux cleaned = 2.69448e-05 Jy
! Total flux subtracted in 200 components = 2.69448e-05 Jy
! Clean residual min=-0.001356 max=0.001231 Jy/beam
! Clean residual mean=0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.129678 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 117 components and 0.129678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050578Jy  sigma=1.308454
! Fit after  self-cal, rms=0.050577Jy  sigma=1.308447
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=1.924 mas, bpa=-2.916 degrees
! Estimated noise=0.235554 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7465 x 1.924 at -2.916 degrees (North through East)
! Clean map  min=-0.0010615  max=0.10288 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5675 mas, bmaj=1.609 mas, bpa=-2.879 degrees
! Estimated noise=0.451235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0783193 Jy
! Component: 100  -  total flux cleaned = 0.0971833 Jy
! Component: 150  -  total flux cleaned = 0.105425 Jy
! Component: 200  -  total flux cleaned = 0.110615 Jy
! Total flux subtracted in 200 components = 0.110615 Jy
! Clean residual min=-0.002462 max=0.002984 Jy/beam
! Clean residual mean=-0.000001 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.110615 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.110615 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=1.924 mas, bpa=-2.916 degrees
! Estimated noise=0.235554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579967 Jy
! Component: 100  -  total flux cleaned = 0.00880491 Jy
! Component: 150  -  total flux cleaned = 0.0108632 Jy
! Component: 200  -  total flux cleaned = 0.012423 Jy
! Total flux subtracted in 200 components = 0.012423 Jy
! Clean residual min=-0.001749 max=0.001584 Jy/beam
! Clean residual mean=-0.000002 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.123038 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 54 components and 0.123038 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=5.545 mas, bpa=-1.689 degrees
! Estimated noise=0.315257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199654 Jy
! Component: 100  -  total flux cleaned = 0.00315455 Jy
! Component: 150  -  total flux cleaned = 0.00402656 Jy
! Component: 200  -  total flux cleaned = 0.004685 Jy
! Total flux subtracted in 200 components = 0.004685 Jy
! Clean residual min=-0.001724 max=0.001384 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.127723 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049928 Jy
! Component: 100  -  total flux cleaned = 0.00067764 Jy
! Component: 150  -  total flux cleaned = 0.000749641 Jy
! Component: 200  -  total flux cleaned = 0.00080292 Jy
! Total flux subtracted in 200 components = 0.00080292 Jy
! Clean residual min=-0.001602 max=0.001352 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.128526 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 78 components and 0.128526 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=1.924 mas, bpa=-2.916 degrees
! Estimated noise=0.235554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237122 Jy
! Component: 100  -  total flux cleaned = -0.000104767 Jy
! Component: 150  -  total flux cleaned = 3.38177e-05 Jy
! Component: 200  -  total flux cleaned = 0.000154164 Jy
! Total flux subtracted in 200 components = 0.000154164 Jy
! Clean residual min=-0.001289 max=0.001212 Jy/beam
! Clean residual mean=-0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.12868 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 92 components and 0.12868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050596Jy  sigma=1.309015
! Fit after  self-cal, rms=0.050594Jy  sigma=1.308898
wmodel /J1317-2031_X_map.mod
! wmodel: Unable to open new model file: /J1317-2031_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1317-2031_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7465 x 1.924 at -2.916 degrees (North through East)
! Clean map  min=-0.00117  max=0.10244 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1317-2031_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102442 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000293243 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.85876 0.85876 1.71752 3.43504 6.87008 13.7402 27.4803 54.9607
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  349.34 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1317-2031_X_dfm.log closed on Fri May 20 00:08:34 2016