! Started logfile: /scr/pima/bg219a_uvs/J1312-0424_X_dfm.log on Fri May 20 00:08:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1312-0424_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1312-0424_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.812169 visibilities/baseline/integration-bin.
! Found source: J1312-0424
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1312-0424_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043972Jy  sigma=27.501513
! Fit after  self-cal, rms=0.738258Jy  sigma=19.154243
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6441 mas, bmaj=1.699 mas, bpa=-0.7357 degrees
! Estimated noise=0.512288 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19349 Jy
! Component: 100  -  total flux cleaned = 0.249722 Jy
! Total flux subtracted in 100 components = 0.249722 Jy
! Clean residual min=-0.016366 max=0.025597 Jy/beam
! Clean residual mean=0.000016 rms=0.003504 Jy/beam
! Combined flux in latest and established models = 0.249722 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.249722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086054Jy  sigma=2.237238
! Fit after  self-cal, rms=0.085855Jy  sigma=2.232307
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0292049 Jy
! Component: 100  -  total flux cleaned = 0.0459054 Jy
! Total flux subtracted in 100 components = 0.0459054 Jy
! Clean residual min=-0.009316 max=0.011353 Jy/beam
! Clean residual mean=0.000010 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.295627 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.295627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071067Jy  sigma=1.818586
! Fit after  self-cal, rms=0.071062Jy  sigma=1.817783
! Inverting map 
! Added new window around map position (-0.6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118635 Jy
! Component: 100  -  total flux cleaned = 0.0188962 Jy
! Total flux subtracted in 100 components = 0.0188962 Jy
! Clean residual min=-0.006832 max=0.006080 Jy/beam
! Clean residual mean=0.000007 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.314524 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.314524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068189Jy  sigma=1.742149
! Fit after  self-cal, rms=0.068152Jy  sigma=1.740929
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.777 mas, bmaj=1.945 mas, bpa=-1.065 degrees
! Estimated noise=0.339841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724608 Jy
! Component: 100  -  total flux cleaned = 0.0113167 Jy
! Component: 150  -  total flux cleaned = 0.0137076 Jy
! Component: 200  -  total flux cleaned = 0.0141769 Jy
! Total flux subtracted in 200 components = 0.0141769 Jy
! Clean residual min=-0.004418 max=0.005095 Jy/beam
! Clean residual mean=0.000018 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.3287 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.3287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067323Jy  sigma=1.721352
! Fit after  self-cal, rms=0.067310Jy  sigma=1.720755
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.777 x 1.945 at -1.065 degrees (North through East)
! Clean map  min=-0.0037165  max=0.26442 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        0.99     NL        1.03     
!   OV        1.01     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.98     MK        1.00     NL        1.01     
!   OV        1.01     PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.96     MK        0.99     NL        1.04     
!   OV        1.03     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        0.98     NL        1.04     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.97     MK        0.99     NL        1.03     
!   OV        1.01     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        0.97     NL        1.04     
!   OV        1.00     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.98     MK        1.00     NL        1.04     
!   OV        0.98     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        0.99     NL        1.02     
!   OV        1.03     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        0.97     NL        1.05     
!   OV        1.02     PT        0.98     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        1.01     NL        1.02     
!   OV        1.01     PT        1.00     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        0.97     NL        1.02     
!   OV        1.02     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.97     MK        1.00     NL        1.02     
!   OV        1.00     PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.067310Jy  sigma=1.720755
! Fit after  self-cal, rms=0.066728Jy  sigma=1.707742
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7754 mas, bmaj=1.947 mas, bpa=-1.095 degrees
! Estimated noise=0.339047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187842 Jy
! Component: 100  -  total flux cleaned = -0.000198371 Jy
! Component: 150  -  total flux cleaned = -0.000199314 Jy
! Component: 200  -  total flux cleaned = -0.000245429 Jy
! Total flux subtracted in 200 components = -0.000245429 Jy
! Clean residual min=-0.003196 max=0.003657 Jy/beam
! Clean residual mean=0.000009 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.328455 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 38 components and 0.328455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066601Jy  sigma=1.705499
! Fit after  self-cal, rms=0.066593Jy  sigma=1.705202
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066593Jy  sigma=1.705202
! Fit after  self-cal, rms=0.066219Jy  sigma=1.692201
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.774 mas, bmaj=1.949 mas, bpa=-1.098 degrees
! Estimated noise=0.338503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.84134e-05 Jy
! Component: 100  -  total flux cleaned = -0.000328843 Jy
! Component: 150  -  total flux cleaned = -0.000516067 Jy
! Component: 200  -  total flux cleaned = -0.000579714 Jy
! Total flux subtracted in 200 components = -0.000579714 Jy
! Clean residual min=-0.002340 max=0.002559 Jy/beam
! Clean residual mean=0.000006 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.327875 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.327875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066163Jy  sigma=1.690923
! Fit after  self-cal, rms=0.066161Jy  sigma=1.690787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25, -36.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194899 Jy
! Component: 100  -  total flux cleaned = 0.00224813 Jy
! Component: 150  -  total flux cleaned = 0.00211226 Jy
! Component: 200  -  total flux cleaned = 0.00202291 Jy
! Total flux subtracted in 200 components = 0.00202291 Jy
! Clean residual min=-0.002243 max=0.002127 Jy/beam
! Clean residual mean=0.000005 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.329898 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.329898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066076Jy  sigma=1.689201
! Fit after  self-cal, rms=0.066070Jy  sigma=1.689103
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066070Jy  sigma=1.689103
! Fit after  self-cal, rms=0.066036Jy  sigma=1.688965
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7735 mas, bmaj=1.949 mas, bpa=-1.115 degrees
! Estimated noise=0.338288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348477 Jy
! Component: 100  -  total flux cleaned = 0.000268711 Jy
! Component: 150  -  total flux cleaned = 0.000171791 Jy
! Component: 200  -  total flux cleaned = 0.000102467 Jy
! Total flux subtracted in 200 components = 0.000102467 Jy
! Clean residual min=-0.002176 max=0.001944 Jy/beam
! Clean residual mean=0.000005 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.330001 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 67 components and 0.330001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066013Jy  sigma=1.688526
! Fit after  self-cal, rms=0.066012Jy  sigma=1.688497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.0925e-05 Jy
! Component: 100  -  total flux cleaned = -0.00018029 Jy
! Component: 150  -  total flux cleaned = -0.000240986 Jy
! Component: 200  -  total flux cleaned = -0.000279586 Jy
! Total flux subtracted in 200 components = -0.000279586 Jy
! Clean residual min=-0.002106 max=0.001828 Jy/beam
! Clean residual mean=0.000005 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.329721 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 74 components and 0.329721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065999Jy  sigma=1.688230
! Fit after  self-cal, rms=0.065998Jy  sigma=1.688212
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065998Jy  sigma=1.688212
! Fit after  self-cal, rms=0.065983Jy  sigma=1.688183
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.109 mas, bmaj=4.401 mas, bpa=-4.863 degrees
! Estimated noise=0.466563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208124 Jy
! Component: 100  -  total flux cleaned = -0.000229748 Jy
! Component: 150  -  total flux cleaned = -0.00024858 Jy
! Component: 200  -  total flux cleaned = -0.000248047 Jy
! Total flux subtracted in 200 components = -0.000248047 Jy
! Clean residual min=-0.002310 max=0.002166 Jy/beam
! Clean residual mean=0.000013 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.329473 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 81 components and 0.329473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065986Jy  sigma=1.688170
! Fit after  self-cal, rms=0.065982Jy  sigma=1.688103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.28333e-05 Jy
! Component: 100  -  total flux cleaned = -2.13668e-05 Jy
! Component: 150  -  total flux cleaned = -3.63334e-05 Jy
! Component: 200  -  total flux cleaned = -5.06264e-05 Jy
! Total flux subtracted in 200 components = -5.06264e-05 Jy
! Clean residual min=-0.002287 max=0.002141 Jy/beam
! Clean residual mean=0.000013 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.329422 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.329422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065989Jy  sigma=1.688187
! Fit after  self-cal, rms=0.065986Jy  sigma=1.688147
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7733 mas, bmaj=1.949 mas, bpa=-1.118 degrees
! Estimated noise=0.338201 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7733 x 1.949 at -1.118 degrees (North through East)
! Clean map  min=-0.0019343  max=0.26415 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6408 mas, bmaj=1.702 mas, bpa=-0.7437 degrees
! Estimated noise=0.509995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.192652 Jy
! Component: 100  -  total flux cleaned = 0.250086 Jy
! Component: 150  -  total flux cleaned = 0.28029 Jy
! Component: 200  -  total flux cleaned = 0.298518 Jy
! Total flux subtracted in 200 components = 0.298518 Jy
! Clean residual min=-0.006877 max=0.009379 Jy/beam
! Clean residual mean=0.000006 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 0.298518 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.298518 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7733 mas, bmaj=1.949 mas, bpa=-1.118 degrees
! Estimated noise=0.338201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146358 Jy
! Component: 100  -  total flux cleaned = 0.0220439 Jy
! Component: 150  -  total flux cleaned = 0.0260869 Jy
! Component: 200  -  total flux cleaned = 0.0287269 Jy
! Total flux subtracted in 200 components = 0.0287269 Jy
! Clean residual min=-0.002958 max=0.002568 Jy/beam
! Clean residual mean=0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.327245 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 36 components and 0.327245 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.109 mas, bmaj=4.401 mas, bpa=-4.863 degrees
! Estimated noise=0.466563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137599 Jy
! Component: 100  -  total flux cleaned = 0.00173395 Jy
! Component: 150  -  total flux cleaned = 0.00200859 Jy
! Component: 200  -  total flux cleaned = 0.00195832 Jy
! Total flux subtracted in 200 components = 0.00195832 Jy
! Clean residual min=-0.002371 max=0.002341 Jy/beam
! Clean residual mean=0.000013 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.329204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.20736e-05 Jy
! Component: 100  -  total flux cleaned = -4.37962e-05 Jy
! Component: 150  -  total flux cleaned = -8.28559e-05 Jy
! Component: 200  -  total flux cleaned = -0.000118704 Jy
! Total flux subtracted in 200 components = -0.000118704 Jy
! Clean residual min=-0.002329 max=0.002249 Jy/beam
! Clean residual mean=0.000013 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.329085 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 0.329085 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7733 mas, bmaj=1.949 mas, bpa=-1.118 degrees
! Estimated noise=0.338201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237979 Jy
! Component: 100  -  total flux cleaned = -0.000100835 Jy
! Component: 150  -  total flux cleaned = -0.000102092 Jy
! Component: 200  -  total flux cleaned = -9.94889e-05 Jy
! Total flux subtracted in 200 components = -9.94889e-05 Jy
! Clean residual min=-0.002496 max=0.002198 Jy/beam
! Clean residual mean=0.000005 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.328985 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.328985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066119Jy  sigma=1.690726
! Fit after  self-cal, rms=0.066106Jy  sigma=1.690547
wmodel /J1312-0424_X_map.mod
! wmodel: Unable to open new model file: /J1312-0424_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1312-0424_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7733 x 1.949 at -1.118 degrees (North through East)
! Clean map  min=-0.0021252  max=0.26485 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1312-0424_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.264853 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000491909 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.557188 0.557188 1.11438 2.22875 4.45751 8.91501 17.83 35.6601 71.3201
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.264 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  538.417 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1312-0424_X_dfm.log closed on Fri May 20 00:08:20 2016