! Started logfile: /scr/pima/bg219a_uvs/J1305-2850_S_dfm.log on Fri May 20 00:08:00 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1305-2850_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1305-2850_S_uva.fits ! AN table 1: 48 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.939484 visibilities/baseline/integration-bin. ! Found source: J1305-2850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3788 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1305-2850_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.002512Jy sigma=19.978082 ! Fit after self-cal, rms=0.892583Jy sigma=17.737137 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=6.062 mas, bpa=-2.42 degrees ! Estimated noise=0.918711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792531 Jy ! Component: 100 - total flux cleaned = 0.103038 Jy ! Total flux subtracted in 100 components = 0.103038 Jy ! Clean residual min=-0.007235 max=0.011114 Jy/beam ! Clean residual mean=-0.000110 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.103038 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.103038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070641Jy sigma=1.340949 ! Fit after self-cal, rms=0.070115Jy sigma=1.332235 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.383 mas, bpa=-3.311 degrees ! Estimated noise=0.595727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018189 Jy ! Component: 100 - total flux cleaned = 0.0268024 Jy ! Component: 150 - total flux cleaned = 0.0312978 Jy ! Component: 200 - total flux cleaned = 0.0337486 Jy ! Total flux subtracted in 200 components = 0.0337486 Jy ! Clean residual min=-0.005555 max=0.008205 Jy/beam ! Clean residual mean=-0.000071 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.136787 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.136787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066072Jy sigma=1.233580 ! Fit after self-cal, rms=0.066077Jy sigma=1.232544 ! Inverting map ! Added new window around map position (7.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789673 Jy ! Component: 100 - total flux cleaned = 0.0115415 Jy ! Component: 150 - total flux cleaned = 0.0137792 Jy ! Component: 200 - total flux cleaned = 0.0153725 Jy ! Total flux subtracted in 200 components = 0.0153725 Jy ! Clean residual min=-0.004153 max=0.003807 Jy/beam ! Clean residual mean=-0.000020 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.15216 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 55 components and 0.15216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065168Jy sigma=1.214157 ! Fit after self-cal, rms=0.065013Jy sigma=1.211528 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.383 at -3.311 degrees (North through East) ! Clean map min=-0.0039781 max=0.10805 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 LA 0.95 MK 0.99 NL 1.05 ! OV 1.04 PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 LA 0.97 MK 1.03 NL 1.07 ! OV 1.01 PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 LA 0.98 MK 0.97 NL 1.01 ! OV 1.02 PT 1.03 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 LA 0.99 MK 0.96 NL 1.04 ! OV 0.98 PT 0.96 SC 0.94 ! ! ! Fit before self-cal, rms=0.065013Jy sigma=1.211528 ! Fit after self-cal, rms=0.064439Jy sigma=1.206929 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.348 mas, bpa=-3.145 degrees ! Estimated noise=0.590527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015938 Jy ! Component: 100 - total flux cleaned = 0.00167619 Jy ! Component: 150 - total flux cleaned = 0.00164368 Jy ! Component: 200 - total flux cleaned = 0.001644 Jy ! Total flux subtracted in 200 components = 0.001644 Jy ! Clean residual min=-0.003353 max=0.003081 Jy/beam ! Clean residual mean=0.000005 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.153804 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.153804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064375Jy sigma=1.205942 ! Fit after self-cal, rms=0.064391Jy sigma=1.205711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064391Jy sigma=1.205711 ! Fit after self-cal, rms=0.063990Jy sigma=1.203214 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.33 mas, bpa=-2.997 degrees ! Estimated noise=0.588807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00093138 Jy ! Component: 100 - total flux cleaned = 0.000937299 Jy ! Component: 150 - total flux cleaned = 0.000912453 Jy ! Component: 200 - total flux cleaned = 0.00086697 Jy ! Total flux subtracted in 200 components = 0.00086697 Jy ! Clean residual min=-0.002951 max=0.002619 Jy/beam ! Clean residual mean=0.000007 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.15467 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.15467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063960Jy sigma=1.202781 ! Fit after self-cal, rms=0.063953Jy sigma=1.202692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249326 Jy ! Component: 100 - total flux cleaned = 0.000206881 Jy ! Component: 150 - total flux cleaned = 0.000168741 Jy ! Component: 200 - total flux cleaned = 0.000151031 Jy ! Total flux subtracted in 200 components = 0.000151031 Jy ! Clean residual min=-0.002922 max=0.002601 Jy/beam ! Clean residual mean=0.000008 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.154822 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.154822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063939Jy sigma=1.202469 ! Fit after self-cal, rms=0.063934Jy sigma=1.202446 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063934Jy sigma=1.202446 ! Fit after self-cal, rms=0.063716Jy sigma=1.202212 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.32 mas, bpa=-2.908 degrees ! Estimated noise=0.587054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593146 Jy ! Component: 100 - total flux cleaned = 0.000612416 Jy ! Component: 150 - total flux cleaned = 0.000578539 Jy ! Component: 200 - total flux cleaned = 0.000579108 Jy ! Total flux subtracted in 200 components = 0.000579108 Jy ! Clean residual min=-0.002808 max=0.002551 Jy/beam ! Clean residual mean=0.000009 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.155401 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.155401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063703Jy sigma=1.202013 ! Fit after self-cal, rms=0.063700Jy sigma=1.201988 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50359e-05 Jy ! Component: 100 - total flux cleaned = 5.49793e-05 Jy ! Component: 150 - total flux cleaned = 4.10148e-05 Jy ! Component: 200 - total flux cleaned = 2.7515e-05 Jy ! Total flux subtracted in 200 components = 2.7515e-05 Jy ! Clean residual min=-0.002787 max=0.002511 Jy/beam ! Clean residual mean=0.000009 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.155428 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.155428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063693Jy sigma=1.201865 ! Fit after self-cal, rms=0.063691Jy sigma=1.201855 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063691Jy sigma=1.201855 ! Fit after self-cal, rms=0.063567Jy sigma=1.201819 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=21 mas, bpa=0.9577 degrees ! Estimated noise=0.790221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296956 Jy ! Component: 100 - total flux cleaned = 0.000349664 Jy ! Component: 150 - total flux cleaned = 0.000357473 Jy ! Component: 200 - total flux cleaned = 0.000364321 Jy ! Total flux subtracted in 200 components = 0.000364321 Jy ! Clean residual min=-0.003423 max=0.003581 Jy/beam ! Clean residual mean=0.000019 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.155792 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.155792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063561Jy sigma=1.201795 ! Fit after self-cal, rms=0.063559Jy sigma=1.201772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71852e-05 Jy ! Component: 100 - total flux cleaned = 4.12979e-05 Jy ! Component: 150 - total flux cleaned = 4.79112e-05 Jy ! Component: 200 - total flux cleaned = 5.40136e-05 Jy ! Total flux subtracted in 200 components = 5.40136e-05 Jy ! Clean residual min=-0.003403 max=0.003605 Jy/beam ! Clean residual mean=0.000019 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.155846 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 111 components and 0.155846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063557Jy sigma=1.201754 ! Fit after self-cal, rms=0.063557Jy sigma=1.201736 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.314 mas, bpa=-2.859 degrees ! Estimated noise=0.586202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.314 at -2.859 degrees (North through East) ! Clean map min=-0.0026246 max=0.10664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.279 mas, bmaj=6.01 mas, bpa=-1.84 degrees ! Estimated noise=0.896413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0774479 Jy ! Component: 100 - total flux cleaned = 0.102147 Jy ! Component: 150 - total flux cleaned = 0.116388 Jy ! Component: 200 - total flux cleaned = 0.126089 Jy ! Total flux subtracted in 200 components = 0.126089 Jy ! Clean residual min=-0.004867 max=0.005508 Jy/beam ! Clean residual mean=-0.000055 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.126089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.126089 Jy ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.314 mas, bpa=-2.859 degrees ! Estimated noise=0.586202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939326 Jy ! Component: 100 - total flux cleaned = 0.0152074 Jy ! Component: 150 - total flux cleaned = 0.0191406 Jy ! Component: 200 - total flux cleaned = 0.0219515 Jy ! Total flux subtracted in 200 components = 0.0219515 Jy ! Clean residual min=-0.003407 max=0.002596 Jy/beam ! Clean residual mean=-0.000021 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.148041 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 71 components and 0.148041 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=21 mas, bpa=0.9577 degrees ! Estimated noise=0.790221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353696 Jy ! Component: 100 - total flux cleaned = 0.00545197 Jy ! Component: 150 - total flux cleaned = 0.00655908 Jy ! Component: 200 - total flux cleaned = 0.00703812 Jy ! Total flux subtracted in 200 components = 0.00703812 Jy ! Clean residual min=-0.003561 max=0.003667 Jy/beam ! Clean residual mean=0.000012 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.155079 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164545 Jy ! Component: 100 - total flux cleaned = 0.000266547 Jy ! Component: 150 - total flux cleaned = 0.000311014 Jy ! Component: 200 - total flux cleaned = 0.000352172 Jy ! Total flux subtracted in 200 components = 0.000352172 Jy ! Clean residual min=-0.003481 max=0.003620 Jy/beam ! Clean residual mean=0.000015 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.155431 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 104 components and 0.155431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.314 mas, bpa=-2.859 degrees ! Estimated noise=0.586202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388361 Jy ! Component: 100 - total flux cleaned = -0.000356996 Jy ! Component: 150 - total flux cleaned = -0.000329857 Jy ! Component: 200 - total flux cleaned = -0.000303708 Jy ! Total flux subtracted in 200 components = -0.000303708 Jy ! Clean residual min=-0.002867 max=0.002489 Jy/beam ! Clean residual mean=0.000006 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.155128 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.155128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063581Jy sigma=1.202110 ! Fit after self-cal, rms=0.063580Jy sigma=1.201977 wmodel /J1305-2850_S_map.mod ! wmodel: Unable to open new model file: /J1305-2850_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1305-2850_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.76 x 7.314 at -2.859 degrees (North through East) ! Clean map min=-0.0027171 max=0.10684 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1305-2850_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.106836 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000746203 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.09536 2.09536 4.19073 8.38145 16.7629 33.5258 67.0516 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.106 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 143.173 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1305-2850_S_dfm.log closed on Fri May 20 00:08:02 2016