! Started logfile: /scr/pima/bg219a_uvs/J1300+1206_S_dfm.log on Fri May 20 00:07:37 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1300+1206_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1300+1206_S_uva.fits ! AN table 1: 47 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.700101 visibilities/baseline/integration-bin. ! Found source: J1300+1206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1300+1206_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002398Jy sigma=26.084972 ! Fit after self-cal, rms=0.916989Jy sigma=23.793828 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=6 mas, bpa=0.259 degrees ! Estimated noise=0.809903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577126 Jy ! Component: 100 - total flux cleaned = 0.0770586 Jy ! Total flux subtracted in 100 components = 0.0770586 Jy ! Clean residual min=-0.007580 max=0.009585 Jy/beam ! Clean residual mean=-0.000110 rms=0.002118 Jy/beam ! Combined flux in latest and established models = 0.0770586 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0770586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061825Jy sigma=1.426328 ! Fit after self-cal, rms=0.061341Jy sigma=1.414575 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=7.133 mas, bpa=-4.181 degrees ! Estimated noise=0.538338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166844 Jy ! Component: 100 - total flux cleaned = 0.0245278 Jy ! Component: 150 - total flux cleaned = 0.0286315 Jy ! Component: 200 - total flux cleaned = 0.0309084 Jy ! Total flux subtracted in 200 components = 0.0309084 Jy ! Clean residual min=-0.003200 max=0.004726 Jy/beam ! Clean residual mean=-0.000040 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.107967 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 35 components and 0.107967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057115Jy sigma=1.288115 ! Fit after self-cal, rms=0.057066Jy sigma=1.286483 ! Inverting map ! Added new window around map position (-5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423272 Jy ! Component: 100 - total flux cleaned = 0.00505743 Jy ! Component: 150 - total flux cleaned = 0.00511985 Jy ! Component: 200 - total flux cleaned = 0.00512303 Jy ! Total flux subtracted in 200 components = 0.00512303 Jy ! Clean residual min=-0.002792 max=0.003008 Jy/beam ! Clean residual mean=-0.000008 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.11309 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.11309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056727Jy sigma=1.277436 ! Fit after self-cal, rms=0.056673Jy sigma=1.276397 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.711 x 7.133 at -4.181 degrees (North through East) ! Clean map min=-0.0025767 max=0.082457 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 LA 0.98 MK 0.99 NL 0.95 ! OV 1.05 PT 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 LA 0.99 MK 0.98 NL 1.00 ! OV 1.00 PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 LA 0.95 MK 0.96 NL 1.00 ! OV 1.05 PT 0.99 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 LA 1.09 MK 1.00 NL 0.97 ! OV 0.96 PT 0.99 SC 0.91 ! ! ! Fit before self-cal, rms=0.056673Jy sigma=1.276397 ! Fit after self-cal, rms=0.056021Jy sigma=1.272735 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=7.121 mas, bpa=-4.591 degrees ! Estimated noise=0.534097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117548 Jy ! Component: 100 - total flux cleaned = 0.00113595 Jy ! Component: 150 - total flux cleaned = 0.000966975 Jy ! Component: 200 - total flux cleaned = 0.00085172 Jy ! Total flux subtracted in 200 components = 0.00085172 Jy ! Clean residual min=-0.002535 max=0.002806 Jy/beam ! Clean residual mean=-0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.113942 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.113942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055952Jy sigma=1.271233 ! Fit after self-cal, rms=0.055947Jy sigma=1.270980 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055947Jy sigma=1.270980 ! Fit after self-cal, rms=0.054115Jy sigma=1.268309 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=7.119 mas, bpa=-4.76 degrees ! Estimated noise=0.5312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451064 Jy ! Component: 100 - total flux cleaned = 0.000478723 Jy ! Component: 150 - total flux cleaned = 0.000524274 Jy ! Component: 200 - total flux cleaned = 0.000466253 Jy ! Total flux subtracted in 200 components = 0.000466253 Jy ! Clean residual min=-0.002262 max=0.002330 Jy/beam ! Clean residual mean=0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.114408 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.114408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054087Jy sigma=1.267712 ! Fit after self-cal, rms=0.054055Jy sigma=1.267563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139028 Jy ! Component: 100 - total flux cleaned = 0.00134944 Jy ! Component: 150 - total flux cleaned = 0.00131771 Jy ! Component: 200 - total flux cleaned = 0.00126085 Jy ! Total flux subtracted in 200 components = 0.00126085 Jy ! Clean residual min=-0.002117 max=0.001934 Jy/beam ! Clean residual mean=0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.115669 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 0.115669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053962Jy sigma=1.264875 ! Fit after self-cal, rms=0.053949Jy sigma=1.264657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053949Jy sigma=1.264657 ! Fit after self-cal, rms=0.053875Jy sigma=1.264507 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=7.143 mas, bpa=-4.819 degrees ! Estimated noise=0.530115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050131 Jy ! Component: 100 - total flux cleaned = 0.000421294 Jy ! Component: 150 - total flux cleaned = 0.000374336 Jy ! Component: 200 - total flux cleaned = 0.00033226 Jy ! Total flux subtracted in 200 components = 0.00033226 Jy ! Clean residual min=-0.002066 max=0.002002 Jy/beam ! Clean residual mean=-0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.116001 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.116001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053846Jy sigma=1.263837 ! Fit after self-cal, rms=0.053848Jy sigma=1.263801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185097 Jy ! Component: 100 - total flux cleaned = 0.000186702 Jy ! Component: 150 - total flux cleaned = 0.000203566 Jy ! Component: 200 - total flux cleaned = 0.00023511 Jy ! Total flux subtracted in 200 components = 0.00023511 Jy ! Clean residual min=-0.002019 max=0.002000 Jy/beam ! Clean residual mean=-0.000003 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.116236 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.116236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053834Jy sigma=1.263533 ! Fit after self-cal, rms=0.053834Jy sigma=1.263524 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053834Jy sigma=1.263524 ! Fit after self-cal, rms=0.053878Jy sigma=1.263462 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.758 mas, bmaj=14 mas, bpa=-18.08 degrees ! Estimated noise=0.67117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260267 Jy ! Component: 100 - total flux cleaned = 0.000356946 Jy ! Component: 150 - total flux cleaned = 0.000357421 Jy ! Component: 200 - total flux cleaned = 0.000335859 Jy ! Total flux subtracted in 200 components = 0.000335859 Jy ! Clean residual min=-0.001600 max=0.001540 Jy/beam ! Clean residual mean=-0.000011 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.116572 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 141 components and 0.116572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053865Jy sigma=1.263413 ! Fit after self-cal, rms=0.053869Jy sigma=1.263385 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124006 Jy ! Component: 100 - total flux cleaned = 0.000146918 Jy ! Component: 150 - total flux cleaned = 0.000116364 Jy ! Component: 200 - total flux cleaned = 8.73069e-05 Jy ! Total flux subtracted in 200 components = 8.73069e-05 Jy ! Clean residual min=-0.001576 max=0.001518 Jy/beam ! Clean residual mean=-0.000010 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.116659 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 150 components and 0.116659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053864Jy sigma=1.263396 ! Fit after self-cal, rms=0.053865Jy sigma=1.263379 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=7.161 mas, bpa=-4.873 degrees ! Estimated noise=0.529847 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 7.161 at -4.873 degrees (North through East) ! Clean map min=-0.0018968 max=0.081232 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=6.017 mas, bpa=-0.3239 degrees ! Estimated noise=0.793405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568908 Jy ! Component: 100 - total flux cleaned = 0.0771204 Jy ! Component: 150 - total flux cleaned = 0.0889844 Jy ! Component: 200 - total flux cleaned = 0.0958838 Jy ! Total flux subtracted in 200 components = 0.0958838 Jy ! Clean residual min=-0.004990 max=0.005169 Jy/beam ! Clean residual mean=-0.000056 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.0958838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0958838 Jy ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=7.161 mas, bpa=-4.873 degrees ! Estimated noise=0.529847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079994 Jy ! Component: 100 - total flux cleaned = 0.0122227 Jy ! Component: 150 - total flux cleaned = 0.0151085 Jy ! Component: 200 - total flux cleaned = 0.0163846 Jy ! Total flux subtracted in 200 components = 0.0163846 Jy ! Clean residual min=-0.002443 max=0.002038 Jy/beam ! Clean residual mean=-0.000030 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.112268 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 56 components and 0.112268 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.758 mas, bmaj=14 mas, bpa=-18.08 degrees ! Estimated noise=0.67117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194045 Jy ! Component: 100 - total flux cleaned = 0.0030149 Jy ! Component: 150 - total flux cleaned = 0.00356093 Jy ! Component: 200 - total flux cleaned = 0.00367871 Jy ! Total flux subtracted in 200 components = 0.00367871 Jy ! Clean residual min=-0.001760 max=0.001460 Jy/beam ! Clean residual mean=-0.000019 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.115947 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.92577e-05 Jy ! Component: 100 - total flux cleaned = 0.000114794 Jy ! Component: 150 - total flux cleaned = 0.000130563 Jy ! Component: 200 - total flux cleaned = 0.000144608 Jy ! Total flux subtracted in 200 components = 0.000144608 Jy ! Clean residual min=-0.001643 max=0.001435 Jy/beam ! Clean residual mean=-0.000016 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.116092 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 101 components and 0.116092 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=7.161 mas, bpa=-4.873 degrees ! Estimated noise=0.529847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111155 Jy ! Component: 100 - total flux cleaned = 0.000360012 Jy ! Component: 150 - total flux cleaned = 0.000412198 Jy ! Component: 200 - total flux cleaned = 0.000387086 Jy ! Total flux subtracted in 200 components = 0.000387086 Jy ! Clean residual min=-0.002067 max=0.002008 Jy/beam ! Clean residual mean=-0.000006 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.116479 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.116479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053882Jy sigma=1.264183 ! Fit after self-cal, rms=0.053879Jy sigma=1.264008 wmodel /J1300+1206_S_map.mod ! wmodel: Unable to open new model file: /J1300+1206_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1300+1206_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 7.161 at -4.873 degrees (North through East) ! Clean map min=-0.0019278 max=0.080737 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1300+1206_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.080737 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000469217 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.7435 1.7435 3.48701 6.97401 13.948 27.896 55.7921 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.08 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 172.067 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1300+1206_S_dfm.log closed on Fri May 20 00:07:40 2016