! Started logfile: /scr/pima/bg219a_uvs/J1256-2155_X_dfm.log on Fri May 20 00:07:33 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1256-2155_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1256-2155_X_uva.fits
! AN table 1: 61 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.848556 visibilities/baseline/integration-bin.
! Found source: J1256-2155
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 13044 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1256-2155_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010370Jy  sigma=26.408477
! Fit after  self-cal, rms=0.902855Jy  sigma=23.424926
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5744 mas, bmaj=1.724 mas, bpa=-3.535 degrees
! Estimated noise=0.541681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068994 Jy
! Component: 100  -  total flux cleaned = 0.0941744 Jy
! Total flux subtracted in 100 components = 0.0941744 Jy
! Clean residual min=-0.010052 max=0.019408 Jy/beam
! Clean residual mean=-0.000018 rms=0.002896 Jy/beam
! Combined flux in latest and established models = 0.0941743 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0941743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073224Jy  sigma=1.874262
! Fit after  self-cal, rms=0.072546Jy  sigma=1.856638
! Inverting map 
! Added new window around map position (3.6, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194416 Jy
! Component: 100  -  total flux cleaned = 0.0324358 Jy
! Total flux subtracted in 100 components = 0.0324358 Jy
! Clean residual min=-0.007258 max=0.011216 Jy/beam
! Clean residual mean=-0.000013 rms=0.002043 Jy/beam
! Combined flux in latest and established models = 0.12661 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.12661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064165Jy  sigma=1.620091
! Fit after  self-cal, rms=0.063629Jy  sigma=1.606939
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7434 mas, bmaj=2.06 mas, bpa=-3.862 degrees
! Estimated noise=0.253684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193488 Jy
! Component: 100  -  total flux cleaned = 0.0326034 Jy
! Component: 150  -  total flux cleaned = 0.042215 Jy
! Component: 200  -  total flux cleaned = 0.0492347 Jy
! Total flux subtracted in 200 components = 0.0492347 Jy
! Clean residual min=-0.005176 max=0.010932 Jy/beam
! Clean residual mean=-0.000014 rms=0.001819 Jy/beam
! Combined flux in latest and established models = 0.175845 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 43 components and 0.175845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056160Jy  sigma=1.394670
! Fit after  self-cal, rms=0.055760Jy  sigma=1.382613
! Inverting map 
! Added new window around map position (2.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010388 Jy
! Component: 100  -  total flux cleaned = 0.0162727 Jy
! Component: 150  -  total flux cleaned = 0.0206022 Jy
! Component: 200  -  total flux cleaned = 0.0239126 Jy
! Total flux subtracted in 200 components = 0.0239126 Jy
! Clean residual min=-0.002961 max=0.003660 Jy/beam
! Clean residual mean=-0.000002 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.199757 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 71 components and 0.199757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053567Jy  sigma=1.322942
! Fit after  self-cal, rms=0.053397Jy  sigma=1.318386
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7434 x 2.06 at -3.862 degrees (North through East)
! Clean map  min=-0.0023481  max=0.099645 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.91     MK        1.00     NL        1.00     
!   OV        1.02     PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.94     MK        0.97     NL        1.00     
!   OV        1.00     PT        0.98     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.95     MK        1.05     NL        0.99     
!   OV        1.02     PT        0.98     SC        1.16     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.99     MK        1.03     NL        1.02     
!   OV        1.02     PT        0.97     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.94     MK        1.04     NL        1.02     
!   OV        1.01     PT        0.98     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.93     MK        1.04     NL        1.04     
!   OV        1.00     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        0.99     NL        1.00     
!   OV        0.99     PT        0.99     SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        1.03     NL        1.04     
!   OV        1.03     PT        0.95     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.93     MK        1.03     NL        1.05     
!   OV        1.02     PT        0.99     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.96     MK        1.01     NL        1.03     
!   OV        1.02     PT        0.96     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.99     MK        1.03     NL        1.04     
!   OV        0.97     PT        0.99     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.95     MK        0.97     NL        1.05     
!   OV        1.00     PT        0.99     SC        0.87     
! 
! 
! Fit before self-cal, rms=0.053397Jy  sigma=1.318386
! Fit after  self-cal, rms=0.053017Jy  sigma=1.309004
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7504 mas, bmaj=2.074 mas, bpa=-3.818 degrees
! Estimated noise=0.251368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265468 Jy
! Component: 100  -  total flux cleaned = 0.00267027 Jy
! Component: 150  -  total flux cleaned = 0.00260605 Jy
! Component: 200  -  total flux cleaned = 0.00249957 Jy
! Total flux subtracted in 200 components = 0.00249957 Jy
! Clean residual min=-0.001653 max=0.001819 Jy/beam
! Clean residual mean=0.000003 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.202257 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.202257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052786Jy  sigma=1.304166
! Fit after  self-cal, rms=0.052783Jy  sigma=1.303679
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052783Jy  sigma=1.303679
! Fit after  self-cal, rms=0.053297Jy  sigma=1.301940
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7535 mas, bmaj=2.077 mas, bpa=-4 degrees
! Estimated noise=0.253046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.39412e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104043 Jy
! Component: 150  -  total flux cleaned = 0.000105342 Jy
! Component: 200  -  total flux cleaned = 0.000105309 Jy
! Total flux subtracted in 200 components = 0.000105309 Jy
! Clean residual min=-0.001357 max=0.001657 Jy/beam
! Clean residual mean=0.000003 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.202362 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.202362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053208Jy  sigma=1.300317
! Fit after  self-cal, rms=0.053209Jy  sigma=1.300154
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.8, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150843 Jy
! Component: 100  -  total flux cleaned = 0.00198362 Jy
! Component: 150  -  total flux cleaned = 0.00233639 Jy
! Component: 200  -  total flux cleaned = 0.00259439 Jy
! Total flux subtracted in 200 components = 0.00259439 Jy
! Clean residual min=-0.001304 max=0.001301 Jy/beam
! Clean residual mean=0.000002 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.204957 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.204957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053142Jy  sigma=1.298634
! Fit after  self-cal, rms=0.053136Jy  sigma=1.298537
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053136Jy  sigma=1.298537
! Fit after  self-cal, rms=0.053363Jy  sigma=1.298296
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7547 mas, bmaj=2.08 mas, bpa=-4.114 degrees
! Estimated noise=0.25364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450289 Jy
! Component: 100  -  total flux cleaned = 0.000669552 Jy
! Component: 150  -  total flux cleaned = 0.000811232 Jy
! Component: 200  -  total flux cleaned = 0.000943568 Jy
! Total flux subtracted in 200 components = 0.000943568 Jy
! Clean residual min=-0.001209 max=0.001248 Jy/beam
! Clean residual mean=0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.2059 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.2059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053325Jy  sigma=1.297583
! Fit after  self-cal, rms=0.053326Jy  sigma=1.297542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196388 Jy
! Component: 100  -  total flux cleaned = 0.00029747 Jy
! Component: 150  -  total flux cleaned = 0.000320669 Jy
! Component: 200  -  total flux cleaned = 0.00036649 Jy
! Total flux subtracted in 200 components = 0.00036649 Jy
! Clean residual min=-0.001137 max=0.001228 Jy/beam
! Clean residual mean=0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.206267 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 120 components and 0.206267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053302Jy  sigma=1.297108
! Fit after  self-cal, rms=0.053301Jy  sigma=1.297089
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053301Jy  sigma=1.297089
! Fit after  self-cal, rms=0.053489Jy  sigma=1.297044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.328 mas, bmaj=6.113 mas, bpa=1.389 degrees
! Estimated noise=0.326632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.49323e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118037 Jy
! Component: 150  -  total flux cleaned = 0.000142065 Jy
! Component: 200  -  total flux cleaned = 0.000174338 Jy
! Total flux subtracted in 200 components = 0.000174338 Jy
! Clean residual min=-0.001015 max=0.001115 Jy/beam
! Clean residual mean=0.000004 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.206441 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 134 components and 0.206441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053483Jy  sigma=1.296904
! Fit after  self-cal, rms=0.053484Jy  sigma=1.296893
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87733e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107706 Jy
! Component: 150  -  total flux cleaned = 7.16401e-05 Jy
! Component: 200  -  total flux cleaned = 3.74564e-05 Jy
! Total flux subtracted in 200 components = 3.74564e-05 Jy
! Clean residual min=-0.001018 max=0.001091 Jy/beam
! Clean residual mean=0.000004 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.206479 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 140 components and 0.206479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053480Jy  sigma=1.296815
! Fit after  self-cal, rms=0.053480Jy  sigma=1.296812
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7553 mas, bmaj=2.085 mas, bpa=-4.237 degrees
! Estimated noise=0.254109 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7553 x 2.085 at -4.237 degrees (North through East)
! Clean map  min=-0.0012919  max=0.09964 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5805 mas, bmaj=1.724 mas, bpa=-3.716 degrees
! Estimated noise=0.550073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0695772 Jy
! Component: 100  -  total flux cleaned = 0.101639 Jy
! Component: 150  -  total flux cleaned = 0.122002 Jy
! Component: 200  -  total flux cleaned = 0.136257 Jy
! Total flux subtracted in 200 components = 0.136257 Jy
! Clean residual min=-0.006452 max=0.009846 Jy/beam
! Clean residual mean=-0.000009 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.136257 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.136257 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7553 mas, bmaj=2.085 mas, bpa=-4.237 degrees
! Estimated noise=0.254109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180455 Jy
! Component: 100  -  total flux cleaned = 0.0301198 Jy
! Component: 150  -  total flux cleaned = 0.0388514 Jy
! Component: 200  -  total flux cleaned = 0.045217 Jy
! Total flux subtracted in 200 components = 0.045217 Jy
! Clean residual min=-0.002791 max=0.003710 Jy/beam
! Clean residual mean=-0.000005 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.181474 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.181474 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.328 mas, bmaj=6.113 mas, bpa=1.389 degrees
! Estimated noise=0.326632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0073863 Jy
! Component: 100  -  total flux cleaned = 0.0114652 Jy
! Component: 150  -  total flux cleaned = 0.0140882 Jy
! Component: 200  -  total flux cleaned = 0.0159311 Jy
! Total flux subtracted in 200 components = 0.0159311 Jy
! Clean residual min=-0.001824 max=0.001625 Jy/beam
! Clean residual mean=0.000001 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.197405 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145794 Jy
! Component: 100  -  total flux cleaned = 0.00265669 Jy
! Component: 150  -  total flux cleaned = 0.00365273 Jy
! Component: 200  -  total flux cleaned = 0.00448476 Jy
! Total flux subtracted in 200 components = 0.00448476 Jy
! Clean residual min=-0.001388 max=0.001267 Jy/beam
! Clean residual mean=0.000002 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.20189 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 82 components and 0.20189 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7553 mas, bmaj=2.085 mas, bpa=-4.237 degrees
! Estimated noise=0.254109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108417 Jy
! Component: 100  -  total flux cleaned = 0.0012287 Jy
! Component: 150  -  total flux cleaned = 0.00134018 Jy
! Component: 200  -  total flux cleaned = 0.00170016 Jy
! Total flux subtracted in 200 components = 0.00170016 Jy
! Clean residual min=-0.001398 max=0.001598 Jy/beam
! Clean residual mean=0.000002 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.20359 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 109 components and 0.20359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053578Jy  sigma=1.299071
! Fit after  self-cal, rms=0.053486Jy  sigma=1.297884
wmodel /J1256-2155_X_map.mod
! wmodel: Unable to open new model file: /J1256-2155_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1256-2155_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7553 x 2.085 at -4.237 degrees (North through East)
! Clean map  min=-0.0011923  max=0.099593 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1256-2155_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0995927 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000322446 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.971293 0.971293 1.94259 3.88517 7.77035 15.5407 31.0814 62.1628
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  308.866 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1256-2155_X_dfm.log closed on Fri May 20 00:07:36 2016