! Started logfile: /scr/pima/bg219a_uvs/J1248-0632_X_dfm.log on Fri May 20 00:06:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1248-0632_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1248-0632_X_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.778912 visibilities/baseline/integration-bin.
! Found source: J1248-0632
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5496 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1248-0632_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019383Jy  sigma=27.803128
! Fit after  self-cal, rms=0.837976Jy  sigma=22.822075
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6352 mas, bmaj=1.701 mas, bpa=-2.574 degrees
! Estimated noise=0.611803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117283 Jy
! Component: 100  -  total flux cleaned = 0.153607 Jy
! Total flux subtracted in 100 components = 0.153607 Jy
! Clean residual min=-0.007226 max=0.015877 Jy/beam
! Clean residual mean=0.000003 rms=0.002188 Jy/beam
! Combined flux in latest and established models = 0.153607 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.153607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064536Jy  sigma=1.746056
! Fit after  self-cal, rms=0.064352Jy  sigma=1.742194
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170421 Jy
! Component: 100  -  total flux cleaned = 0.026183 Jy
! Total flux subtracted in 100 components = 0.026183 Jy
! Clean residual min=-0.005074 max=0.007964 Jy/beam
! Clean residual mean=0.000002 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.17979 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.17979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057137Jy  sigma=1.526051
! Fit after  self-cal, rms=0.057104Jy  sigma=1.525088
! Inverting map 
! Added new window around map position (1, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768393 Jy
! Component: 100  -  total flux cleaned = 0.0126649 Jy
! Total flux subtracted in 100 components = 0.0126649 Jy
! Clean residual min=-0.004272 max=0.004634 Jy/beam
! Clean residual mean=0.000002 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.192455 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.192455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055387Jy  sigma=1.475280
! Fit after  self-cal, rms=0.055335Jy  sigma=1.473894
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8068 mas, bmaj=2.11 mas, bpa=-4.523 degrees
! Estimated noise=0.388502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693123 Jy
! Component: 100  -  total flux cleaned = 0.0110768 Jy
! Component: 150  -  total flux cleaned = 0.0136747 Jy
! Component: 200  -  total flux cleaned = 0.0153388 Jy
! Total flux subtracted in 200 components = 0.0153388 Jy
! Clean residual min=-0.003343 max=0.003731 Jy/beam
! Clean residual mean=0.000006 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.207794 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 59 components and 0.207794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054435Jy  sigma=1.447970
! Fit after  self-cal, rms=0.054401Jy  sigma=1.446911
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8068 x 2.11 at -4.523 degrees (North through East)
! Clean map  min=-0.0029121  max=0.16012 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        0.99     NL        1.02     
!   OV        1.01     PT        0.97     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        0.99     NL        1.03     
!   OV        1.00     PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        1.02     NL        1.02     
!   OV        1.01     PT        0.98     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.01     NL        1.05     
!   OV        1.01     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.96     MK        0.96     NL        1.05     
!   OV        1.00     PT        1.01     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.00     MK        1.03     NL        1.01     
!   OV        1.00     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.00     MK        1.01     NL        1.02     
!   OV        0.97     PT        0.95     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.99     MK        1.01     NL        1.02     
!   OV        1.01     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        1.00     MK        0.97     NL        1.05     
!   OV        0.99     PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.97     MK        1.07     NL        1.02     
!   OV        1.04     PT        0.96     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        0.98     NL        0.99     
!   OV        1.03     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        1.01     NL        1.00     
!   OV        1.02     PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.054401Jy  sigma=1.446911
! Fit after  self-cal, rms=0.054039Jy  sigma=1.437910
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8092 mas, bmaj=2.117 mas, bpa=-4.493 degrees
! Estimated noise=0.387794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.50099e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119628 Jy
! Component: 150  -  total flux cleaned = -0.000119394 Jy
! Component: 200  -  total flux cleaned = -0.00011918 Jy
! Total flux subtracted in 200 components = -0.00011918 Jy
! Clean residual min=-0.003035 max=0.002741 Jy/beam
! Clean residual mean=0.000002 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.207675 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.207675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054025Jy  sigma=1.437485
! Fit after  self-cal, rms=0.054021Jy  sigma=1.437403
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054021Jy  sigma=1.437403
! Fit after  self-cal, rms=0.054036Jy  sigma=1.428518
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.809 mas, bmaj=2.12 mas, bpa=-4.531 degrees
! Estimated noise=0.387367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.56305e-05 Jy
! Component: 100  -  total flux cleaned = 3.17878e-05 Jy
! Component: 150  -  total flux cleaned = 3.34476e-05 Jy
! Component: 200  -  total flux cleaned = 3.42371e-05 Jy
! Total flux subtracted in 200 components = 3.42371e-05 Jy
! Clean residual min=-0.002618 max=0.002573 Jy/beam
! Clean residual mean=0.000003 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.207709 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 73 components and 0.207709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054019Jy  sigma=1.427997
! Fit after  self-cal, rms=0.054028Jy  sigma=1.427933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.24464e-05 Jy
! Component: 100  -  total flux cleaned = 5.24462e-05 Jy
! Component: 150  -  total flux cleaned = 5.26931e-05 Jy
! Component: 200  -  total flux cleaned = 5.28775e-05 Jy
! Total flux subtracted in 200 components = 5.28775e-05 Jy
! Clean residual min=-0.002582 max=0.002605 Jy/beam
! Clean residual mean=0.000003 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.207762 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 77 components and 0.207762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054023Jy  sigma=1.427770
! Fit after  self-cal, rms=0.054022Jy  sigma=1.427764
! Inverting map 
! Added new window around map position (-4, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233898 Jy
! Component: 100  -  total flux cleaned = 0.00304963 Jy
! Component: 150  -  total flux cleaned = 0.00314058 Jy
! Component: 200  -  total flux cleaned = 0.00314179 Jy
! Total flux subtracted in 200 components = 0.00314179 Jy
! Clean residual min=-0.002260 max=0.001846 Jy/beam
! Clean residual mean=0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.210903 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.210903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053917Jy  sigma=1.425192
! Fit after  self-cal, rms=0.053906Jy  sigma=1.424937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053906Jy  sigma=1.424937
! Fit after  self-cal, rms=0.053816Jy  sigma=1.424453
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8089 mas, bmaj=2.12 mas, bpa=-4.484 degrees
! Estimated noise=0.386783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108456 Jy
! Component: 100  -  total flux cleaned = 0.00136529 Jy
! Component: 150  -  total flux cleaned = 0.00136424 Jy
! Component: 200  -  total flux cleaned = 0.00134564 Jy
! Total flux subtracted in 200 components = 0.00134564 Jy
! Clean residual min=-0.002103 max=0.001826 Jy/beam
! Clean residual mean=0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.212249 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 105 components and 0.212249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053788Jy  sigma=1.423777
! Fit after  self-cal, rms=0.053785Jy  sigma=1.423712
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397063 Jy
! Component: 100  -  total flux cleaned = 0.000431176 Jy
! Component: 150  -  total flux cleaned = 0.00040213 Jy
! Component: 200  -  total flux cleaned = 0.000361633 Jy
! Total flux subtracted in 200 components = 0.000361633 Jy
! Clean residual min=-0.002080 max=0.001853 Jy/beam
! Clean residual mean=0.000002 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.212611 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 0.212611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053776Jy  sigma=1.423476
! Fit after  self-cal, rms=0.053775Jy  sigma=1.423459
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053775Jy  sigma=1.423459
! Fit after  self-cal, rms=0.053726Jy  sigma=1.423327
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=4.945 mas, bpa=-7.032 degrees
! Estimated noise=0.503144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000555579 Jy
! Component: 100  -  total flux cleaned = 0.000578285 Jy
! Component: 150  -  total flux cleaned = 0.000577996 Jy
! Component: 200  -  total flux cleaned = 0.000593998 Jy
! Total flux subtracted in 200 components = 0.000593998 Jy
! Clean residual min=-0.002871 max=0.002363 Jy/beam
! Clean residual mean=0.000006 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.213205 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 135 components and 0.213205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053722Jy  sigma=1.423203
! Fit after  self-cal, rms=0.053721Jy  sigma=1.423187
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146796 Jy
! Component: 100  -  total flux cleaned = 0.000139837 Jy
! Component: 150  -  total flux cleaned = 0.00012007 Jy
! Component: 200  -  total flux cleaned = 0.00010761 Jy
! Total flux subtracted in 200 components = 0.00010761 Jy
! Clean residual min=-0.002793 max=0.002391 Jy/beam
! Clean residual mean=0.000006 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.213312 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 146 components and 0.213312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053721Jy  sigma=1.423165
! Fit after  self-cal, rms=0.053721Jy  sigma=1.423160
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8088 mas, bmaj=2.12 mas, bpa=-4.48 degrees
! Estimated noise=0.386523 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8088 x 2.12 at -4.48 degrees (North through East)
! Clean map  min=-0.001937  max=0.15965 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6359 mas, bmaj=1.711 mas, bpa=-2.719 degrees
! Estimated noise=0.614486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117692 Jy
! Component: 100  -  total flux cleaned = 0.15482 Jy
! Component: 150  -  total flux cleaned = 0.172064 Jy
! Component: 200  -  total flux cleaned = 0.181194 Jy
! Total flux subtracted in 200 components = 0.181194 Jy
! Clean residual min=-0.004158 max=0.004843 Jy/beam
! Clean residual mean=0.000002 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.181194 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.181194 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8088 mas, bmaj=2.12 mas, bpa=-4.48 degrees
! Estimated noise=0.386523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100449 Jy
! Component: 100  -  total flux cleaned = 0.0161155 Jy
! Component: 150  -  total flux cleaned = 0.0202786 Jy
! Component: 200  -  total flux cleaned = 0.023208 Jy
! Total flux subtracted in 200 components = 0.023208 Jy
! Clean residual min=-0.002652 max=0.002183 Jy/beam
! Clean residual mean=0.000006 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.204402 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 51 components and 0.204402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=4.945 mas, bpa=-7.032 degrees
! Estimated noise=0.503144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349185 Jy
! Component: 100  -  total flux cleaned = 0.00550896 Jy
! Component: 150  -  total flux cleaned = 0.00681857 Jy
! Component: 200  -  total flux cleaned = 0.00768381 Jy
! Total flux subtracted in 200 components = 0.00768381 Jy
! Clean residual min=-0.003012 max=0.002214 Jy/beam
! Clean residual mean=0.000007 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.212085 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557537 Jy
! Component: 100  -  total flux cleaned = 0.000698112 Jy
! Component: 150  -  total flux cleaned = 0.000801795 Jy
! Component: 200  -  total flux cleaned = 0.000892595 Jy
! Total flux subtracted in 200 components = 0.000892595 Jy
! Clean residual min=-0.002869 max=0.002281 Jy/beam
! Clean residual mean=0.000006 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.212978 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 96 components and 0.212978 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8088 mas, bmaj=2.12 mas, bpa=-4.48 degrees
! Estimated noise=0.386523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.84815e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122698 Jy
! Component: 150  -  total flux cleaned = 0.000146221 Jy
! Component: 200  -  total flux cleaned = 0.00016746 Jy
! Total flux subtracted in 200 components = 0.00016746 Jy
! Clean residual min=-0.002141 max=0.001853 Jy/beam
! Clean residual mean=0.000003 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.213145 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.213145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053748Jy  sigma=1.423556
! Fit after  self-cal, rms=0.053745Jy  sigma=1.423477
wmodel /J1248-0632_X_map.mod
! wmodel: Unable to open new model file: /J1248-0632_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1248-0632_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8088 x 2.12 at -4.48 degrees (North through East)
! Clean map  min=-0.0019756  max=0.1601 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1248-0632_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.160103 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000450968 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.845021 0.845021 1.69004 3.38009 6.76017 13.5203 27.0407 54.0814
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.16 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  355.02 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1248-0632_X_dfm.log closed on Fri May 20 00:07:00 2016