! Started logfile: /scr/pima/bg219a_uvs/J1228+4858_S_dfm.log on Fri May 20 00:06:12 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1228+4858_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1228+4858_S_uva.fits ! AN table 1: 23 integrations on 15 of 15 possible baselines. ! AN table 2: 24 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J1228+4858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2184 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1228+4858_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006494Jy sigma=27.631067 ! Fit after self-cal, rms=0.751968Jy sigma=20.575437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=3.799 mas, bpa=35.04 degrees ! Estimated noise=0.834543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191793 Jy ! Component: 100 - total flux cleaned = 0.233616 Jy ! Total flux subtracted in 100 components = 0.233616 Jy ! Clean residual min=-0.009580 max=0.012294 Jy/beam ! Clean residual mean=0.000076 rms=0.002483 Jy/beam ! Combined flux in latest and established models = 0.233616 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.233616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054603Jy sigma=1.418808 ! Fit after self-cal, rms=0.054598Jy sigma=1.418732 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=4.355 mas, bpa=34.97 degrees ! Estimated noise=0.576557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130808 Jy ! Component: 100 - total flux cleaned = 0.0184452 Jy ! Component: 150 - total flux cleaned = 0.0215747 Jy ! Component: 200 - total flux cleaned = 0.0232747 Jy ! Total flux subtracted in 200 components = 0.0232747 Jy ! Clean residual min=-0.009160 max=0.009412 Jy/beam ! Clean residual mean=0.000147 rms=0.002627 Jy/beam ! Combined flux in latest and established models = 0.256891 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.256891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051478Jy sigma=1.342119 ! Fit after self-cal, rms=0.051463Jy sigma=1.341326 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.662 x 4.355 at 34.97 degrees (North through East) ! Clean map min=-0.0090181 max=0.24702 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 MK 1.00 NL 1.05 OV 0.99 ! PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.96 MK 1.01 NL 1.02 OV 1.02 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 MK 0.99 NL 1.12 OV 0.96 ! PT 1.03 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.95 MK 1.01 NL 1.01 OV 1.05 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 MK 1.01 NL 1.08 OV 0.96 ! PT 1.05 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.99 MK 1.01 NL 1.03 OV 0.97 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 MK 0.96 NL 1.15 OV 0.96 ! PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.96 MK 1.03 NL 1.10 OV 0.96 ! PT 0.94 ! ! ! Fit before self-cal, rms=0.051463Jy sigma=1.341326 ! Fit after self-cal, rms=0.049240Jy sigma=1.274304 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=4.367 mas, bpa=35.13 degrees ! Estimated noise=0.575412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173197 Jy ! Component: 100 - total flux cleaned = -0.00193936 Jy ! Component: 150 - total flux cleaned = -0.00211453 Jy ! Component: 200 - total flux cleaned = -0.00221346 Jy ! Total flux subtracted in 200 components = -0.00221346 Jy ! Clean residual min=-0.005625 max=0.007714 Jy/beam ! Clean residual mean=0.000060 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.254677 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.254677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049031Jy sigma=1.270039 ! Fit after self-cal, rms=0.049030Jy sigma=1.269590 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049030Jy sigma=1.269590 ! Fit after self-cal, rms=0.048979Jy sigma=1.269066 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=4.363 mas, bpa=35.18 degrees ! Estimated noise=0.574667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117171 Jy ! Component: 100 - total flux cleaned = -0.00140672 Jy ! Component: 150 - total flux cleaned = -0.00152158 Jy ! Component: 200 - total flux cleaned = -0.0015899 Jy ! Total flux subtracted in 200 components = -0.0015899 Jy ! Clean residual min=-0.005517 max=0.007531 Jy/beam ! Clean residual mean=0.000056 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.253087 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.253088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048886Jy sigma=1.267157 ! Fit after self-cal, rms=0.048883Jy sigma=1.267017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228408 Jy ! Component: 100 - total flux cleaned = -0.000259012 Jy ! Component: 150 - total flux cleaned = -0.000315588 Jy ! Component: 200 - total flux cleaned = -0.000367564 Jy ! Total flux subtracted in 200 components = -0.000367564 Jy ! Clean residual min=-0.005518 max=0.007383 Jy/beam ! Clean residual mean=0.000058 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.25272 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.25272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048843Jy sigma=1.266123 ! Fit after self-cal, rms=0.048841Jy sigma=1.266025 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048841Jy sigma=1.266025 ! Fit after self-cal, rms=0.048800Jy sigma=1.265719 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=4.362 mas, bpa=35.22 degrees ! Estimated noise=0.574172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000822458 Jy ! Component: 100 - total flux cleaned = -0.000938815 Jy ! Component: 150 - total flux cleaned = -0.000989865 Jy ! Component: 200 - total flux cleaned = -0.00105897 Jy ! Total flux subtracted in 200 components = -0.00105897 Jy ! Clean residual min=-0.005344 max=0.007305 Jy/beam ! Clean residual mean=0.000054 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.251661 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.251661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048765Jy sigma=1.264934 ! Fit after self-cal, rms=0.048764Jy sigma=1.264853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172839 Jy ! Component: 100 - total flux cleaned = -0.000172217 Jy ! Component: 150 - total flux cleaned = -0.000213782 Jy ! Component: 200 - total flux cleaned = -0.000252301 Jy ! Total flux subtracted in 200 components = -0.000252301 Jy ! Clean residual min=-0.005326 max=0.007220 Jy/beam ! Clean residual mean=0.000055 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.251409 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.251409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048745Jy sigma=1.264378 ! Fit after self-cal, rms=0.048744Jy sigma=1.264319 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048744Jy sigma=1.264319 ! Fit after self-cal, rms=0.048719Jy sigma=1.264197 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=10.02 mas, bpa=47.07 degrees ! Estimated noise=0.730654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000889848 Jy ! Component: 100 - total flux cleaned = -0.00089337 Jy ! Component: 150 - total flux cleaned = -0.000895847 Jy ! Component: 200 - total flux cleaned = -0.000933454 Jy ! Total flux subtracted in 200 components = -0.000933454 Jy ! Clean residual min=-0.008648 max=0.011432 Jy/beam ! Clean residual mean=0.000124 rms=0.003551 Jy/beam ! Combined flux in latest and established models = 0.250475 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.250475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048771Jy sigma=1.265254 ! Fit after self-cal, rms=0.048696Jy sigma=1.263195 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100665 Jy ! Component: 100 - total flux cleaned = -0.000102196 Jy ! Component: 150 - total flux cleaned = -0.000103659 Jy ! Component: 200 - total flux cleaned = -0.000119879 Jy ! Total flux subtracted in 200 components = -0.000119879 Jy ! Clean residual min=-0.008704 max=0.011291 Jy/beam ! Clean residual mean=0.000125 rms=0.003524 Jy/beam ! Combined flux in latest and established models = 0.250355 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 0.250355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048756Jy sigma=1.264437 ! Fit after self-cal, rms=0.048700Jy sigma=1.262991 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=4.362 mas, bpa=35.26 degrees ! Estimated noise=0.573797 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.664 x 4.362 at 35.26 degrees (North through East) ! Clean map min=-0.0054092 max=0.249 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=3.805 mas, bpa=35.11 degrees ! Estimated noise=0.841879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193359 Jy ! Component: 100 - total flux cleaned = 0.235623 Jy ! Component: 150 - total flux cleaned = 0.246872 Jy ! Component: 200 - total flux cleaned = 0.249885 Jy ! Total flux subtracted in 200 components = 0.249885 Jy ! Clean residual min=-0.006414 max=0.006334 Jy/beam ! Clean residual mean=0.000016 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.249885 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.249885 Jy ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=4.362 mas, bpa=35.26 degrees ! Estimated noise=0.573797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532284 Jy ! Component: 100 - total flux cleaned = 0.00114407 Jy ! Component: 150 - total flux cleaned = 0.000964757 Jy ! Component: 200 - total flux cleaned = 0.000887328 Jy ! Total flux subtracted in 200 components = 0.000887328 Jy ! Clean residual min=-0.005831 max=0.007031 Jy/beam ! Clean residual mean=0.000052 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.250773 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.250773 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.096 mas, bmaj=10.02 mas, bpa=47.07 degrees ! Estimated noise=0.730654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154217 Jy ! Component: 100 - total flux cleaned = 0.000144051 Jy ! Component: 150 - total flux cleaned = 2.83416e-05 Jy ! Component: 200 - total flux cleaned = -1.41229e-05 Jy ! Total flux subtracted in 200 components = -1.41229e-05 Jy ! Clean residual min=-0.008875 max=0.011317 Jy/beam ! Clean residual mean=0.000122 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 0.250759 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.40999e-05 Jy ! Component: 100 - total flux cleaned = -9.31132e-05 Jy ! Component: 150 - total flux cleaned = -0.000117896 Jy ! Component: 200 - total flux cleaned = -0.00014216 Jy ! Total flux subtracted in 200 components = -0.00014216 Jy ! Clean residual min=-0.008781 max=0.011248 Jy/beam ! Clean residual mean=0.000123 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 0.250616 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.250616 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=4.362 mas, bpa=35.26 degrees ! Estimated noise=0.573797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429787 Jy ! Component: 100 - total flux cleaned = 0.000252374 Jy ! Component: 150 - total flux cleaned = 0.000114085 Jy ! Component: 200 - total flux cleaned = 3.84287e-05 Jy ! Total flux subtracted in 200 components = 3.84287e-05 Jy ! Clean residual min=-0.005644 max=0.007010 Jy/beam ! Clean residual mean=0.000052 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.250655 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.250655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048683Jy sigma=1.262694 ! Fit after self-cal, rms=0.048683Jy sigma=1.262580 wmodel /J1228+4858_S_map.mod ! wmodel: Unable to open new model file: /J1228+4858_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1228+4858_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.664 x 4.362 at 35.26 degrees (North through East) ! Clean map min=-0.0054652 max=0.24833 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1228+4858_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.248331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0018361 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.21813 2.21813 4.43626 8.87253 17.7451 35.4901 70.9802 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0055 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.248 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 135.248 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1228+4858_S_dfm.log closed on Fri May 20 00:06:14 2016