! Started logfile: /scr/pima/bg219a_uvs/J1209-4016_S_dfm.log on Fri May 20 00:05:51 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1209-4016_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1209-4016_S_uva.fits ! AN table 1: 60 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.830952 visibilities/baseline/integration-bin. ! Found source: J1209-4016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 4188 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1209-4016_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024489Jy sigma=16.320837 ! Fit after self-cal, rms=0.805282Jy sigma=12.682880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=7.829 mas, bpa=5.539 degrees ! Estimated noise=1.25138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135387 Jy ! Component: 100 - total flux cleaned = 0.190378 Jy ! Total flux subtracted in 100 components = 0.190378 Jy ! Clean residual min=-0.015404 max=0.030006 Jy/beam ! Clean residual mean=-0.000244 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 0.190378 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.190378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110580Jy sigma=1.729161 ! Fit after self-cal, rms=0.110277Jy sigma=1.723126 ! Inverting map ! Added new window around map position (-3, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319654 Jy ! Component: 100 - total flux cleaned = 0.0514448 Jy ! Total flux subtracted in 100 components = 0.0514448 Jy ! Clean residual min=-0.011428 max=0.013741 Jy/beam ! Clean residual mean=-0.000167 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 0.241822 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.241822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094667Jy sigma=1.422368 ! Fit after self-cal, rms=0.094491Jy sigma=1.418694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=9.597 mas, bpa=5.696 degrees ! Estimated noise=0.73562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248391 Jy ! Component: 100 - total flux cleaned = 0.0375797 Jy ! Component: 150 - total flux cleaned = 0.0452469 Jy ! Component: 200 - total flux cleaned = 0.0499409 Jy ! Total flux subtracted in 200 components = 0.0499409 Jy ! Clean residual min=-0.007533 max=0.011415 Jy/beam ! Clean residual mean=-0.000128 rms=0.002638 Jy/beam ! Combined flux in latest and established models = 0.291763 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.291763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089345Jy sigma=1.291974 ! Fit after self-cal, rms=0.089208Jy sigma=1.289610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 9.597 at 5.696 degrees (North through East) ! Clean map min=-0.0075409 max=0.1751 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 LA 0.95 MK 1.08 NL 1.16 ! OV 0.99 PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.089208Jy sigma=1.289610 ! Fit after self-cal, rms=0.089855Jy sigma=1.281678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=9.632 mas, bpa=5.779 degrees ! Estimated noise=0.737377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187135 Jy ! Component: 100 - total flux cleaned = 0.00169714 Jy ! Component: 150 - total flux cleaned = 0.00169825 Jy ! Component: 200 - total flux cleaned = 0.00183811 Jy ! Total flux subtracted in 200 components = 0.00183811 Jy ! Clean residual min=-0.006985 max=0.009114 Jy/beam ! Clean residual mean=-0.000077 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.293601 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.293601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089684Jy sigma=1.279193 ! Fit after self-cal, rms=0.089711Jy sigma=1.278740 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089711Jy sigma=1.278740 ! Fit after self-cal, rms=0.088355Jy sigma=1.255377 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=9.687 mas, bpa=5.896 degrees ! Estimated noise=0.7161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0062594 Jy ! Component: 100 - total flux cleaned = -0.0088618 Jy ! Component: 150 - total flux cleaned = -0.00924772 Jy ! Component: 200 - total flux cleaned = -0.00964099 Jy ! Total flux subtracted in 200 components = -0.00964099 Jy ! Clean residual min=-0.005847 max=0.005507 Jy/beam ! Clean residual mean=-0.000081 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.28396 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 74 components and 0.28396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087770Jy sigma=1.249889 ! Fit after self-cal, rms=0.087871Jy sigma=1.249594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202467 Jy ! Component: 100 - total flux cleaned = -0.00046389 Jy ! Component: 150 - total flux cleaned = -0.00046275 Jy ! Component: 200 - total flux cleaned = -0.000505535 Jy ! Total flux subtracted in 200 components = -0.000505535 Jy ! Clean residual min=-0.005651 max=0.005451 Jy/beam ! Clean residual mean=-0.000083 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.283455 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 75 components and 0.283455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087794Jy sigma=1.249074 ! Fit after self-cal, rms=0.087788Jy sigma=1.249028 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087788Jy sigma=1.249028 ! Fit after self-cal, rms=0.086307Jy sigma=1.245524 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=9.743 mas, bpa=5.924 degrees ! Estimated noise=0.702872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00363307 Jy ! Component: 100 - total flux cleaned = -0.00515167 Jy ! Component: 150 - total flux cleaned = -0.00537836 Jy ! Component: 200 - total flux cleaned = -0.00560747 Jy ! Total flux subtracted in 200 components = -0.00560747 Jy ! Clean residual min=-0.004946 max=0.004700 Jy/beam ! Clean residual mean=-0.000101 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.277847 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.277847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086067Jy sigma=1.244178 ! Fit after self-cal, rms=0.086062Jy sigma=1.244151 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20566e-05 Jy ! Component: 100 - total flux cleaned = -0.000146715 Jy ! Component: 150 - total flux cleaned = -0.000200743 Jy ! Component: 200 - total flux cleaned = -0.000200981 Jy ! Total flux subtracted in 200 components = -0.000200981 Jy ! Clean residual min=-0.004987 max=0.004722 Jy/beam ! Clean residual mean=-0.000102 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.277646 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.277646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086030Jy sigma=1.244014 ! Fit after self-cal, rms=0.086027Jy sigma=1.243992 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086027Jy sigma=1.243992 ! Fit after self-cal, rms=0.085244Jy sigma=1.242808 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=26.3 mas, bpa=3.135 degrees ! Estimated noise=0.870424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00269084 Jy ! Component: 100 - total flux cleaned = -0.00333767 Jy ! Component: 150 - total flux cleaned = -0.00337478 Jy ! Component: 200 - total flux cleaned = -0.00338978 Jy ! Total flux subtracted in 200 components = -0.00338978 Jy ! Clean residual min=-0.005473 max=0.005599 Jy/beam ! Clean residual mean=-0.000219 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.274257 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 93 components and 0.274257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085154Jy sigma=1.242811 ! Fit after self-cal, rms=0.085138Jy sigma=1.242727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112388 Jy ! Component: 100 - total flux cleaned = 9.86326e-05 Jy ! Component: 150 - total flux cleaned = 8.79732e-05 Jy ! Component: 200 - total flux cleaned = 7.74708e-05 Jy ! Total flux subtracted in 200 components = 7.74708e-05 Jy ! Clean residual min=-0.005499 max=0.005683 Jy/beam ! Clean residual mean=-0.000218 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.274334 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 0.274334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085137Jy sigma=1.242786 ! Fit after self-cal, rms=0.085135Jy sigma=1.242758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=9.782 mas, bpa=5.947 degrees ! Estimated noise=0.695319 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 9.782 at 5.947 degrees (North through East) ! Clean map min=-0.007729 max=0.17061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=7.937 mas, bpa=5.96 degrees ! Estimated noise=1.1972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129628 Jy ! Component: 100 - total flux cleaned = 0.182836 Jy ! Component: 150 - total flux cleaned = 0.21215 Jy ! Component: 200 - total flux cleaned = 0.230269 Jy ! Total flux subtracted in 200 components = 0.230269 Jy ! Clean residual min=-0.008908 max=0.011555 Jy/beam ! Clean residual mean=-0.000148 rms=0.002504 Jy/beam ! Combined flux in latest and established models = 0.230269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.230269 Jy ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=9.782 mas, bpa=5.947 degrees ! Estimated noise=0.695319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201326 Jy ! Component: 100 - total flux cleaned = 0.0301632 Jy ! Component: 150 - total flux cleaned = 0.0354696 Jy ! Component: 200 - total flux cleaned = 0.0380244 Jy ! Total flux subtracted in 200 components = 0.0380244 Jy ! Clean residual min=-0.005337 max=0.006214 Jy/beam ! Clean residual mean=-0.000146 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.268293 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.268293 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=26.3 mas, bpa=3.135 degrees ! Estimated noise=0.870424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244602 Jy ! Component: 100 - total flux cleaned = 0.00270515 Jy ! Component: 150 - total flux cleaned = 0.00288316 Jy ! Component: 200 - total flux cleaned = 0.0030016 Jy ! Total flux subtracted in 200 components = 0.0030016 Jy ! Clean residual min=-0.005255 max=0.006344 Jy/beam ! Clean residual mean=-0.000254 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.271295 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110215 Jy ! Component: 100 - total flux cleaned = 0.000214245 Jy ! Component: 150 - total flux cleaned = 0.000312958 Jy ! Component: 200 - total flux cleaned = 0.000346013 Jy ! Total flux subtracted in 200 components = 0.000346013 Jy ! Clean residual min=-0.005258 max=0.006277 Jy/beam ! Clean residual mean=-0.000250 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.271641 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.271641 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=9.782 mas, bpa=5.947 degrees ! Estimated noise=0.695319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000972712 Jy ! Component: 100 - total flux cleaned = -0.00097744 Jy ! Component: 150 - total flux cleaned = -0.000978654 Jy ! Component: 200 - total flux cleaned = -0.000917253 Jy ! Total flux subtracted in 200 components = -0.000917253 Jy ! Clean residual min=-0.005142 max=0.005512 Jy/beam ! Clean residual mean=-0.000133 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.270724 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.270724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085375Jy sigma=1.246540 ! Fit after self-cal, rms=0.085381Jy sigma=1.245811 wmodel /J1209-4016_S_map.mod ! wmodel: Unable to open new model file: /J1209-4016_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1209-4016_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 9.782 at 5.947 degrees (North through East) ! Clean map min=-0.004702 max=0.17007 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1209-4016_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.170075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00142945 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.52145 2.52145 5.0429 10.0858 20.1716 40.3432 80.6864 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.17 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 118.979 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1209-4016_S_dfm.log closed on Fri May 20 00:05:53 2016