! Started logfile: /scr/pima/bg219a_uvs/J1209+2547_X_dfm.log on Fri May 20 00:05:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1209+2547_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1209+2547_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.944444 visibilities/baseline/integration-bin.
! Found source: J1209+2547
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1209+2547_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006860Jy  sigma=29.294177
! Fit after  self-cal, rms=0.912678Jy  sigma=26.485474
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7255 mas, bmaj=1.259 mas, bpa=-3.82 degrees
! Estimated noise=0.613381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0659415 Jy
! Component: 100  -  total flux cleaned = 0.0875084 Jy
! Total flux subtracted in 100 components = 0.0875084 Jy
! Clean residual min=-0.009104 max=0.015119 Jy/beam
! Clean residual mean=-0.000013 rms=0.002344 Jy/beam
! Combined flux in latest and established models = 0.0875084 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0875084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056795Jy  sigma=1.610135
! Fit after  self-cal, rms=0.056260Jy  sigma=1.595940
! Inverting map 
! Added new window around map position (-1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151648 Jy
! Component: 100  -  total flux cleaned = 0.0229502 Jy
! Total flux subtracted in 100 components = 0.0229502 Jy
! Clean residual min=-0.006188 max=0.008853 Jy/beam
! Clean residual mean=-0.000009 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 0.110459 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.110459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051690Jy  sigma=1.449834
! Fit after  self-cal, rms=0.051456Jy  sigma=1.443954
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8901 mas, bmaj=1.523 mas, bpa=-0.7762 degrees
! Estimated noise=0.337907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833518 Jy
! Component: 100  -  total flux cleaned = 0.0138859 Jy
! Component: 150  -  total flux cleaned = 0.0179245 Jy
! Component: 200  -  total flux cleaned = 0.0209195 Jy
! Total flux subtracted in 200 components = 0.0209195 Jy
! Clean residual min=-0.006787 max=0.009961 Jy/beam
! Clean residual mean=-0.000001 rms=0.001668 Jy/beam
! Combined flux in latest and established models = 0.131378 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.131378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049980Jy  sigma=1.388725
! Fit after  self-cal, rms=0.049917Jy  sigma=1.386685
! Inverting map 
! Added new window around map position (-10, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00835212 Jy
! Component: 100  -  total flux cleaned = 0.0124044 Jy
! Component: 150  -  total flux cleaned = 0.0156204 Jy
! Component: 200  -  total flux cleaned = 0.0183539 Jy
! Total flux subtracted in 200 components = 0.0183539 Jy
! Clean residual min=-0.004114 max=0.003406 Jy/beam
! Clean residual mean=-0.000000 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.149732 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 0.149732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048488Jy  sigma=1.338039
! Fit after  self-cal, rms=0.048370Jy  sigma=1.335068
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8901 x 1.523 at -0.7762 degrees (North through East)
! Clean map  min=-0.0038385  max=0.087368 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.98     NL        1.02     OV        0.96     
!   PT        0.97     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.08     NL        1.06     OV        0.99     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.90     MK        1.12     NL        1.05     OV        0.97     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        1.01     OV        0.91     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.11     NL        1.03     OV        0.95     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.04     NL        0.98     OV        0.98     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.04     OV        0.93     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        0.96     OV        0.94     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.01     OV        0.96     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.04     NL        1.07     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.048370Jy  sigma=1.335068
! Fit after  self-cal, rms=0.048226Jy  sigma=1.323091
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9041 mas, bmaj=1.543 mas, bpa=-0.2697 degrees
! Estimated noise=0.334493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301806 Jy
! Component: 100  -  total flux cleaned = 0.00483153 Jy
! Component: 150  -  total flux cleaned = 0.0061106 Jy
! Component: 200  -  total flux cleaned = 0.00693667 Jy
! Total flux subtracted in 200 components = 0.00693667 Jy
! Clean residual min=-0.002149 max=0.002347 Jy/beam
! Clean residual mean=0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.156669 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.156669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048019Jy  sigma=1.316202
! Fit after  self-cal, rms=0.048037Jy  sigma=1.315627
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048037Jy  sigma=1.315627
! Fit after  self-cal, rms=0.047958Jy  sigma=1.310363
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9032 mas, bmaj=1.534 mas, bpa=-0.6183 degrees
! Estimated noise=0.331968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122874 Jy
! Component: 100  -  total flux cleaned = 0.0017751 Jy
! Component: 150  -  total flux cleaned = 0.00206851 Jy
! Component: 200  -  total flux cleaned = 0.00231693 Jy
! Total flux subtracted in 200 components = 0.00231693 Jy
! Clean residual min=-0.001781 max=0.002057 Jy/beam
! Clean residual mean=0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.158986 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.158986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047912Jy  sigma=1.309024
! Fit after  self-cal, rms=0.047921Jy  sigma=1.308818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.4, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106206 Jy
! Component: 100  -  total flux cleaned = 0.00102244 Jy
! Component: 150  -  total flux cleaned = 0.000955019 Jy
! Component: 200  -  total flux cleaned = 0.00106273 Jy
! Total flux subtracted in 200 components = 0.00106273 Jy
! Clean residual min=-0.001689 max=0.001577 Jy/beam
! Clean residual mean=0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.160048 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 78 components and 0.160048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047825Jy  sigma=1.306443
! Fit after  self-cal, rms=0.047815Jy  sigma=1.306244
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047815Jy  sigma=1.306244
! Fit after  self-cal, rms=0.047510Jy  sigma=1.305991
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9024 mas, bmaj=1.534 mas, bpa=-0.6622 degrees
! Estimated noise=0.330272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337184 Jy
! Component: 100  -  total flux cleaned = 0.000597735 Jy
! Component: 150  -  total flux cleaned = 0.000664895 Jy
! Component: 200  -  total flux cleaned = 0.000706115 Jy
! Total flux subtracted in 200 components = 0.000706115 Jy
! Clean residual min=-0.001535 max=0.001520 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.160755 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.160754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047484Jy  sigma=1.305347
! Fit after  self-cal, rms=0.047480Jy  sigma=1.305311
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33, -18.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973409 Jy
! Component: 100  -  total flux cleaned = 0.0011438 Jy
! Component: 150  -  total flux cleaned = 0.00121814 Jy
! Component: 200  -  total flux cleaned = 0.00118378 Jy
! Total flux subtracted in 200 components = 0.00118378 Jy
! Clean residual min=-0.001525 max=0.001327 Jy/beam
! Clean residual mean=0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.161938 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.161938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047441Jy  sigma=1.304387
! Fit after  self-cal, rms=0.047419Jy  sigma=1.304070
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047419Jy  sigma=1.304070
! Fit after  self-cal, rms=0.047212Jy  sigma=1.303895
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.944 mas, bmaj=3.768 mas, bpa=-2.137 degrees
! Estimated noise=0.409837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438963 Jy
! Component: 100  -  total flux cleaned = 0.000425653 Jy
! Component: 150  -  total flux cleaned = 0.000412129 Jy
! Component: 200  -  total flux cleaned = 0.000400029 Jy
! Total flux subtracted in 200 components = 0.000400029 Jy
! Clean residual min=-0.001249 max=0.001241 Jy/beam
! Clean residual mean=0.000003 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.162338 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 0.162338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047201Jy  sigma=1.303667
! Fit after  self-cal, rms=0.047200Jy  sigma=1.303634
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.6, -33.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000957241 Jy
! Component: 100  -  total flux cleaned = 0.00121587 Jy
! Component: 150  -  total flux cleaned = 0.00145035 Jy
! Component: 200  -  total flux cleaned = 0.00162253 Jy
! Total flux subtracted in 200 components = 0.00162253 Jy
! Clean residual min=-0.000776 max=0.000871 Jy/beam
! Clean residual mean=0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.163961 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 141 components and 0.163961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047182Jy  sigma=1.303102
! Fit after  self-cal, rms=0.047179Jy  sigma=1.303034
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9019 mas, bmaj=1.533 mas, bpa=-0.6475 degrees
! Estimated noise=0.329154 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9019 x 1.533 at -0.6475 degrees (North through East)
! Clean map  min=-0.0016023  max=0.086458 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7317 mas, bmaj=1.264 mas, bpa=-3.678 degrees
! Estimated noise=0.605965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0651328 Jy
! Component: 100  -  total flux cleaned = 0.0893653 Jy
! Component: 150  -  total flux cleaned = 0.102622 Jy
! Component: 200  -  total flux cleaned = 0.111725 Jy
! Total flux subtracted in 200 components = 0.111725 Jy
! Clean residual min=-0.005766 max=0.006077 Jy/beam
! Clean residual mean=-0.000008 rms=0.001455 Jy/beam
! Combined flux in latest and established models = 0.111725 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.111725 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9019 mas, bmaj=1.533 mas, bpa=-0.6475 degrees
! Estimated noise=0.329154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798858 Jy
! Component: 100  -  total flux cleaned = 0.0132188 Jy
! Component: 150  -  total flux cleaned = 0.0174745 Jy
! Component: 200  -  total flux cleaned = 0.0205256 Jy
! Total flux subtracted in 200 components = 0.0205256 Jy
! Clean residual min=-0.003523 max=0.003359 Jy/beam
! Clean residual mean=-0.000003 rms=0.000991 Jy/beam
! Combined flux in latest and established models = 0.132251 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.132251 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.944 mas, bmaj=3.768 mas, bpa=-2.137 degrees
! Estimated noise=0.409837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561923 Jy
! Component: 100  -  total flux cleaned = 0.00893863 Jy
! Component: 150  -  total flux cleaned = 0.0115474 Jy
! Component: 200  -  total flux cleaned = 0.0135471 Jy
! Total flux subtracted in 200 components = 0.0135471 Jy
! Clean residual min=-0.002281 max=0.002394 Jy/beam
! Clean residual mean=0.000000 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.145798 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170858 Jy
! Component: 100  -  total flux cleaned = 0.00337884 Jy
! Component: 150  -  total flux cleaned = 0.00482069 Jy
! Component: 200  -  total flux cleaned = 0.00606919 Jy
! Total flux subtracted in 200 components = 0.00606919 Jy
! Clean residual min=-0.001439 max=0.001573 Jy/beam
! Clean residual mean=0.000000 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.151867 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 98 components and 0.151867 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9019 mas, bmaj=1.533 mas, bpa=-0.6475 degrees
! Estimated noise=0.329154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143745 Jy
! Component: 100  -  total flux cleaned = 0.0027061 Jy
! Component: 150  -  total flux cleaned = 0.00362389 Jy
! Component: 200  -  total flux cleaned = 0.00449696 Jy
! Total flux subtracted in 200 components = 0.00449696 Jy
! Clean residual min=-0.001827 max=0.001905 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.156364 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.156364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047374Jy  sigma=1.307788
! Fit after  self-cal, rms=0.047360Jy  sigma=1.306944
wmodel /J1209+2547_X_map.mod
! wmodel: Unable to open new model file: /J1209+2547_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1209+2547_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9019 x 1.533 at -0.6475 degrees (North through East)
! Clean map  min=-0.0015123  max=0.087123 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1209+2547_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0871228 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000367184 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.26437 1.26437 2.52873 5.05747 10.1149 20.2299 40.4597 80.9194
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  237.272 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1209+2547_X_dfm.log closed on Fri May 20 00:05:50 2016