! Started logfile: /scr/pima/bg219a_uvs/J1159+2914_X_dfm.log on Fri May 20 00:05:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1159+2914_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1159+2914_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.701058 visibilities/baseline/integration-bin.
! Found source: J1159+2914
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 3 lines of history.
! 
! Reading 6360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1159+2914_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.240796Jy  sigma=24.831446
! Fit after  self-cal, rms=0.440826Jy  sigma=7.702174
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7831 mas, bmaj=1.073 mas, bpa=-4.331 degrees
! Estimated noise=0.976622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.45264 Jy
! Component: 100  -  total flux cleaned = 0.602185 Jy
! Total flux subtracted in 100 components = 0.602185 Jy
! Clean residual min=-0.052387 max=0.069686 Jy/beam
! Clean residual mean=-0.000128 rms=0.011731 Jy/beam
! Combined flux in latest and established models = 0.602185 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.602185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.280301Jy  sigma=4.084003
! Fit after  self-cal, rms=0.280002Jy  sigma=4.078282
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0790654 Jy
! Component: 100  -  total flux cleaned = 0.126404 Jy
! Total flux subtracted in 100 components = 0.126404 Jy
! Clean residual min=-0.042874 max=0.048759 Jy/beam
! Clean residual mean=-0.000077 rms=0.008461 Jy/beam
! Combined flux in latest and established models = 0.728589 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.728589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.250351Jy  sigma=2.902406
! Fit after  self-cal, rms=0.250230Jy  sigma=2.901292
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.443 mas, bpa=-5.231 degrees
! Estimated noise=0.555713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0512567 Jy
! Component: 100  -  total flux cleaned = 0.0762831 Jy
! Component: 150  -  total flux cleaned = 0.0877673 Jy
! Component: 200  -  total flux cleaned = 0.0885964 Jy
! Total flux subtracted in 200 components = 0.0885964 Jy
! Clean residual min=-0.030234 max=0.038850 Jy/beam
! Clean residual mean=-0.000115 rms=0.007485 Jy/beam
! Combined flux in latest and established models = 0.817186 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 19 components and 0.817186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.248053Jy  sigma=2.500052
! Fit after  self-cal, rms=0.248029Jy  sigma=2.499443
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.443 at -5.231 degrees (North through East)
! Clean map  min=-0.029038  max=0.63215 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00     MK        1.01     NL        1.07     
!   OV        0.98     PT        0.89     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.98     MK        0.96     NL        1.07     
!   OV        0.99     PT        0.87     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.98     MK        0.99     NL        1.05     
!   OV        0.99     PT        0.89     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        0.97     MK        0.99     NL        1.10     
!   OV        1.02     PT        0.91     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.01     MK        0.98     NL        1.09     
!   OV        1.00     PT        0.92     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.05     MK        1.04     NL        1.12     
!   OV        1.03     PT        0.94     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.12     LA        1.03     MK        1.05     NL        1.11     
!   OV        1.00     PT        0.96     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.248029Jy  sigma=2.499443
! Fit after  self-cal, rms=0.248848Jy  sigma=2.345841
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.45 mas, bpa=-5.002 degrees
! Estimated noise=0.555774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290249 Jy
! Component: 100  -  total flux cleaned = 0.0335123 Jy
! Component: 150  -  total flux cleaned = 0.0340992 Jy
! Component: 200  -  total flux cleaned = 0.0345907 Jy
! Total flux subtracted in 200 components = 0.0345907 Jy
! Clean residual min=-0.021535 max=0.023541 Jy/beam
! Clean residual mean=-0.000039 rms=0.004953 Jy/beam
! Combined flux in latest and established models = 0.851776 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.851777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.245273Jy  sigma=2.176766
! Fit after  self-cal, rms=0.244805Jy  sigma=2.160156
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.244805Jy  sigma=2.160156
! Fit after  self-cal, rms=0.240890Jy  sigma=2.128288
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.444 mas, bpa=-4.647 degrees
! Estimated noise=0.553043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00873805 Jy
! Component: 100  -  total flux cleaned = 0.00913128 Jy
! Component: 150  -  total flux cleaned = 0.00945665 Jy
! Component: 200  -  total flux cleaned = 0.00944235 Jy
! Total flux subtracted in 200 components = 0.00944235 Jy
! Clean residual min=-0.018449 max=0.018951 Jy/beam
! Clean residual mean=-0.000033 rms=0.004420 Jy/beam
! Combined flux in latest and established models = 0.861219 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.861219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.239081Jy  sigma=2.086420
! Fit after  self-cal, rms=0.238921Jy  sigma=2.080982
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28.4, 23.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155986 Jy
! Component: 100  -  total flux cleaned = 0.0171088 Jy
! Component: 150  -  total flux cleaned = 0.0181006 Jy
! Component: 200  -  total flux cleaned = 0.0178133 Jy
! Total flux subtracted in 200 components = 0.0178133 Jy
! Clean residual min=-0.016704 max=0.017120 Jy/beam
! Clean residual mean=-0.000031 rms=0.003995 Jy/beam
! Combined flux in latest and established models = 0.879032 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.879032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.236014Jy  sigma=2.030013
! Fit after  self-cal, rms=0.235944Jy  sigma=2.019105
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.235944Jy  sigma=2.019105
! Fit after  self-cal, rms=0.235297Jy  sigma=2.012262
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=1.447 mas, bpa=-4.613 degrees
! Estimated noise=0.554013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954243 Jy
! Component: 100  -  total flux cleaned = 0.0101668 Jy
! Component: 150  -  total flux cleaned = 0.0101716 Jy
! Component: 200  -  total flux cleaned = 0.0101704 Jy
! Total flux subtracted in 200 components = 0.0101704 Jy
! Clean residual min=-0.015384 max=0.014954 Jy/beam
! Clean residual mean=-0.000032 rms=0.003781 Jy/beam
! Combined flux in latest and established models = 0.889203 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 63 components and 0.889203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.233846Jy  sigma=1.988529
! Fit after  self-cal, rms=0.233837Jy  sigma=1.984061
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376644 Jy
! Component: 100  -  total flux cleaned = 0.00424257 Jy
! Component: 150  -  total flux cleaned = 0.00467067 Jy
! Component: 200  -  total flux cleaned = 0.00466488 Jy
! Total flux subtracted in 200 components = 0.00466488 Jy
! Clean residual min=-0.014899 max=0.014623 Jy/beam
! Clean residual mean=-0.000031 rms=0.003663 Jy/beam
! Combined flux in latest and established models = 0.893867 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 67 components and 0.893867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.233021Jy  sigma=1.971156
! Fit after  self-cal, rms=0.233033Jy  sigma=1.969266
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.233033Jy  sigma=1.969266
! Fit after  self-cal, rms=0.232703Jy  sigma=1.966336
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.191 mas, bmaj=3.199 mas, bpa=-3.814 degrees
! Estimated noise=0.753782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374757 Jy
! Component: 100  -  total flux cleaned = 0.00350836 Jy
! Component: 150  -  total flux cleaned = 0.00312443 Jy
! Component: 200  -  total flux cleaned = 0.00277848 Jy
! Total flux subtracted in 200 components = 0.00277848 Jy
! Clean residual min=-0.020554 max=0.020046 Jy/beam
! Clean residual mean=-0.000067 rms=0.005673 Jy/beam
! Combined flux in latest and established models = 0.896646 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 0.896646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.232013Jy  sigma=1.960076
! Fit after  self-cal, rms=0.231997Jy  sigma=1.956681
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020191 Jy
! Component: 100  -  total flux cleaned = 0.00186483 Jy
! Component: 150  -  total flux cleaned = 0.00170871 Jy
! Component: 200  -  total flux cleaned = 0.0015616 Jy
! Total flux subtracted in 200 components = 0.0015616 Jy
! Clean residual min=-0.020322 max=0.019405 Jy/beam
! Clean residual mean=-0.000064 rms=0.005532 Jy/beam
! Combined flux in latest and established models = 0.898208 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.898208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.231558Jy  sigma=1.955297
! Fit after  self-cal, rms=0.231549Jy  sigma=1.953297
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=1.448 mas, bpa=-4.737 degrees
! Estimated noise=0.554618 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.017 x 1.448 at -4.737 degrees (North through East)
! Clean map  min=-0.019469  max=0.61403 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.231549Jy  sigma=1.953297
! Fit after  self-cal, rms=0.229075Jy  sigma=1.879012
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=1.45 mas, bpa=-4.927 degrees
! Estimated noise=0.549814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00316774 Jy
! Component: 100  -  total flux cleaned = -0.00315747 Jy
! Component: 150  -  total flux cleaned = -0.00333343 Jy
! Component: 200  -  total flux cleaned = -0.00349059 Jy
! Total flux subtracted in 200 components = -0.00349059 Jy
! Clean residual min=-0.013237 max=0.013901 Jy/beam
! Clean residual mean=-0.000028 rms=0.003383 Jy/beam
! Combined flux in latest and established models = 0.894717 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.894717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.228290Jy  sigma=1.868202
! Fit after  self-cal, rms=0.228269Jy  sigma=1.867680
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118525 Jy
! Component: 100  -  total flux cleaned = 0.00103633 Jy
! Component: 150  -  total flux cleaned = 0.00103661 Jy
! Component: 200  -  total flux cleaned = 0.0010345 Jy
! Total flux subtracted in 200 components = 0.0010345 Jy
! Clean residual min=-0.013085 max=0.013463 Jy/beam
! Clean residual mean=-0.000027 rms=0.003354 Jy/beam
! Combined flux in latest and established models = 0.895751 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.895751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.228034Jy  sigma=1.861362
! Fit after  self-cal, rms=0.228031Jy  sigma=1.861099
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.228031Jy  sigma=1.861099
! Fit after  self-cal, rms=0.227998Jy  sigma=1.855543
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7812 mas, bmaj=1.076 mas, bpa=-3.89 degrees
! Estimated noise=0.967418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.447625 Jy
! Component: 100  -  total flux cleaned = 0.594857 Jy
! Component: 150  -  total flux cleaned = 0.678164 Jy
! Component: 200  -  total flux cleaned = 0.733714 Jy
! Total flux subtracted in 200 components = 0.733714 Jy
! Clean residual min=-0.033173 max=0.038266 Jy/beam
! Clean residual mean=-0.000059 rms=0.007315 Jy/beam
! Combined flux in latest and established models = 0.733715 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.733715 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.451 mas, bpa=-5.019 degrees
! Estimated noise=0.547385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0588471 Jy
! Component: 100  -  total flux cleaned = 0.0931443 Jy
! Component: 150  -  total flux cleaned = 0.116975 Jy
! Component: 200  -  total flux cleaned = 0.133765 Jy
! Total flux subtracted in 200 components = 0.133765 Jy
! Clean residual min=-0.019052 max=0.019771 Jy/beam
! Clean residual mean=-0.000047 rms=0.004340 Jy/beam
! Combined flux in latest and established models = 0.867479 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.867479 Jy
! Inverting map 
! Added new window around map position (-26, -17.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126738 Jy
! Component: 100  -  total flux cleaned = 0.0177656 Jy
! Component: 150  -  total flux cleaned = 0.0222173 Jy
! Component: 200  -  total flux cleaned = 0.0250049 Jy
! Total flux subtracted in 200 components = 0.0250049 Jy
! Clean residual min=-0.016803 max=0.015542 Jy/beam
! Clean residual mean=-0.000027 rms=0.003629 Jy/beam
! Combined flux in latest and established models = 0.892484 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 68 components and 0.892484 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=3.199 mas, bpa=-3.939 degrees
! Estimated noise=0.744714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228056 Jy
! Component: 100  -  total flux cleaned = 0.00501656 Jy
! Component: 150  -  total flux cleaned = 0.0068954 Jy
! Component: 200  -  total flux cleaned = 0.00856951 Jy
! Total flux subtracted in 200 components = 0.00856951 Jy
! Clean residual min=-0.016910 max=0.016827 Jy/beam
! Clean residual mean=-0.000049 rms=0.004776 Jy/beam
! Combined flux in latest and established models = 0.901054 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125822 Jy
! Component: 100  -  total flux cleaned = 0.00219391 Jy
! Component: 150  -  total flux cleaned = 0.00240582 Jy
! Component: 200  -  total flux cleaned = 0.00261 Jy
! Total flux subtracted in 200 components = 0.00261 Jy
! Clean residual min=-0.016638 max=0.016639 Jy/beam
! Clean residual mean=-0.000048 rms=0.004705 Jy/beam
! Combined flux in latest and established models = 0.903664 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 94 components and 0.903664 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.451 mas, bpa=-5.019 degrees
! Estimated noise=0.547385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103054 Jy
! Component: 100  -  total flux cleaned = 0.00101924 Jy
! Component: 150  -  total flux cleaned = 0.00101472 Jy
! Component: 200  -  total flux cleaned = 0.00102209 Jy
! Total flux subtracted in 200 components = 0.00102209 Jy
! Clean residual min=-0.014973 max=0.014647 Jy/beam
! Clean residual mean=-0.000020 rms=0.003354 Jy/beam
! Combined flux in latest and established models = 0.904686 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.904686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.225401Jy  sigma=1.891901
! Fit after  self-cal, rms=0.225063Jy  sigma=1.876111
wmodel /J1159+2914_X_map.mod
! wmodel: Unable to open new model file: /J1159+2914_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1159+2914_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.016 x 1.451 at -5.019 degrees (North through East)
! Clean map  min=-0.015782  max=0.60364 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1159+2914_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.603636 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00323583 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.60817 1.60817 3.21634 6.43267 12.8653 25.7307 51.4614
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0097 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.603 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  186.547 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1159+2914_X_dfm.log closed on Fri May 20 00:05:35 2016