! Started logfile: /scr/pima/bg219a_uvs/J1149+2824_X_dfm.log on Fri May 20 00:05:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1149+2824_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1149+2824_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.985714 visibilities/baseline/integration-bin.
! Found source: J1149+2824
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4968 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1149+2824_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007114Jy  sigma=29.231434
! Fit after  self-cal, rms=0.887671Jy  sigma=25.696174
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7312 mas, bmaj=1.249 mas, bpa=0.7552 degrees
! Estimated noise=0.731788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.084571 Jy
! Component: 100  -  total flux cleaned = 0.103928 Jy
! Total flux subtracted in 100 components = 0.103928 Jy
! Clean residual min=-0.006210 max=0.007919 Jy/beam
! Clean residual mean=-0.000025 rms=0.001708 Jy/beam
! Combined flux in latest and established models = 0.103928 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.103928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052933Jy  sigma=1.472426
! Fit after  self-cal, rms=0.052871Jy  sigma=1.470946
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9201 mas, bmaj=1.531 mas, bpa=1.407 degrees
! Estimated noise=0.382418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114712 Jy
! Component: 100  -  total flux cleaned = 0.017078 Jy
! Component: 150  -  total flux cleaned = 0.0203857 Jy
! Component: 200  -  total flux cleaned = 0.0223822 Jy
! Total flux subtracted in 200 components = 0.0223822 Jy
! Clean residual min=-0.003263 max=0.005742 Jy/beam
! Clean residual mean=-0.000021 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.12631 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.12631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050634Jy  sigma=1.394939
! Fit after  self-cal, rms=0.050635Jy  sigma=1.394404
! Inverting map 
! Added new window around map position (1.2, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567715 Jy
! Component: 100  -  total flux cleaned = 0.00834138 Jy
! Component: 150  -  total flux cleaned = 0.0100411 Jy
! Component: 200  -  total flux cleaned = 0.0113234 Jy
! Total flux subtracted in 200 components = 0.0113234 Jy
! Clean residual min=-0.002316 max=0.002756 Jy/beam
! Clean residual mean=-0.000012 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.137634 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.137634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050019Jy  sigma=1.376438
! Fit after  self-cal, rms=0.049970Jy  sigma=1.374409
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9201 x 1.531 at 1.407 degrees (North through East)
! Clean map  min=-0.0019278  max=0.11166 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        1.06     OV        1.04     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        1.02     OV        1.03     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.05     OV        1.02     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.97     NL        1.07     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.97     NL        1.03     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.03     NL        0.97     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        1.02     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.049970Jy  sigma=1.374409
! Fit after  self-cal, rms=0.049903Jy  sigma=1.367828
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=1.538 mas, bpa=1.09 degrees
! Estimated noise=0.382604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000418879 Jy
! Component: 100  -  total flux cleaned = 0.000389237 Jy
! Component: 150  -  total flux cleaned = 0.000415944 Jy
! Component: 200  -  total flux cleaned = 0.000504958 Jy
! Total flux subtracted in 200 components = 0.000504958 Jy
! Clean residual min=-0.002050 max=0.001979 Jy/beam
! Clean residual mean=-0.000007 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.138138 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.138138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049867Jy  sigma=1.366881
! Fit after  self-cal, rms=0.049873Jy  sigma=1.366694
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049873Jy  sigma=1.366694
! Fit after  self-cal, rms=0.049858Jy  sigma=1.359484
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9226 mas, bmaj=1.534 mas, bpa=1.128 degrees
! Estimated noise=0.382055 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000236445 Jy
! Component: 100  -  total flux cleaned = 0.00028722 Jy
! Component: 150  -  total flux cleaned = 0.000357181 Jy
! Component: 200  -  total flux cleaned = 0.000394529 Jy
! Total flux subtracted in 200 components = 0.000394529 Jy
! Clean residual min=-0.001557 max=0.001824 Jy/beam
! Clean residual mean=-0.000005 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.138533 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 70 components and 0.138533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049846Jy  sigma=1.359221
! Fit after  self-cal, rms=0.049860Jy  sigma=1.359112
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.6, 24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124835 Jy
! Component: 100  -  total flux cleaned = 0.00143114 Jy
! Component: 150  -  total flux cleaned = 0.0016316 Jy
! Component: 200  -  total flux cleaned = 0.00170882 Jy
! Total flux subtracted in 200 components = 0.00170882 Jy
! Clean residual min=-0.001575 max=0.001625 Jy/beam
! Clean residual mean=-0.000004 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.140242 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 83 components and 0.140242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049808Jy  sigma=1.357843
! Fit after  self-cal, rms=0.049805Jy  sigma=1.357788
! Inverting map 
! Added new window around map position (47.6, -11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176392 Jy
! Component: 100  -  total flux cleaned = 0.000539216 Jy
! Component: 150  -  total flux cleaned = 0.000945699 Jy
! Component: 200  -  total flux cleaned = 0.00120401 Jy
! Total flux subtracted in 200 components = 0.00120401 Jy
! Clean residual min=-0.001259 max=0.001373 Jy/beam
! Clean residual mean=-0.000004 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.141446 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.141446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049735Jy  sigma=1.356078
! Fit after  self-cal, rms=0.049731Jy  sigma=1.355871
! Inverting map 
! Added new window around map position (46.4, 43.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705092 Jy
! Component: 100  -  total flux cleaned = 0.000705442 Jy
! Component: 150  -  total flux cleaned = 0.000753471 Jy
! Component: 200  -  total flux cleaned = 0.000842225 Jy
! Total flux subtracted in 200 components = 0.000842225 Jy
! Clean residual min=-0.001150 max=0.001348 Jy/beam
! Clean residual mean=-0.000004 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.142288 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 112 components and 0.142288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049691Jy  sigma=1.354937
! Fit after  self-cal, rms=0.049693Jy  sigma=1.354862
! Inverting map 
! Added new window around map position (-50.8, -46.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264203 Jy
! Component: 100  -  total flux cleaned = 0.000310433 Jy
! Component: 150  -  total flux cleaned = 0.000433869 Jy
! Component: 200  -  total flux cleaned = 0.000501273 Jy
! Total flux subtracted in 200 components = 0.000501273 Jy
! Clean residual min=-0.001144 max=0.001148 Jy/beam
! Clean residual mean=-0.000003 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.142789 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.142789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049649Jy  sigma=1.353875
! Fit after  self-cal, rms=0.049644Jy  sigma=1.353764
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049644Jy  sigma=1.353764
! Fit after  self-cal, rms=0.049628Jy  sigma=1.353321
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9225 mas, bmaj=1.534 mas, bpa=1.076 degrees
! Estimated noise=0.381164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.40374e-05 Jy
! Component: 100  -  total flux cleaned = 0.000162835 Jy
! Component: 150  -  total flux cleaned = 0.000230794 Jy
! Component: 200  -  total flux cleaned = 0.00027352 Jy
! Total flux subtracted in 200 components = 0.00027352 Jy
! Clean residual min=-0.001089 max=0.001232 Jy/beam
! Clean residual mean=-0.000002 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.143063 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 138 components and 0.143063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049603Jy  sigma=1.352764
! Fit after  self-cal, rms=0.049608Jy  sigma=1.352727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-47, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325974 Jy
! Component: 100  -  total flux cleaned = 0.000288805 Jy
! Component: 150  -  total flux cleaned = 0.000355027 Jy
! Component: 200  -  total flux cleaned = 0.00047883 Jy
! Total flux subtracted in 200 components = 0.00047883 Jy
! Clean residual min=-0.001052 max=0.000994 Jy/beam
! Clean residual mean=-0.000002 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.143542 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 151 components and 0.143542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049570Jy  sigma=1.352035
! Fit after  self-cal, rms=0.049567Jy  sigma=1.351982
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049567Jy  sigma=1.351982
! Fit after  self-cal, rms=0.049596Jy  sigma=1.351861
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.979 mas, bmaj=3.62 mas, bpa=-4.852 degrees
! Estimated noise=0.477186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.87766e-05 Jy
! Component: 100  -  total flux cleaned = 0.000199728 Jy
! Component: 150  -  total flux cleaned = 0.00020084 Jy
! Component: 200  -  total flux cleaned = 0.000212462 Jy
! Total flux subtracted in 200 components = 0.000212462 Jy
! Clean residual min=-0.000777 max=0.000741 Jy/beam
! Clean residual mean=-0.000002 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.143754 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 166 components and 0.143754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049591Jy  sigma=1.351687
! Fit after  self-cal, rms=0.049592Jy  sigma=1.351668
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.03527e-05 Jy
! Component: 100  -  total flux cleaned = -5.0089e-05 Jy
! Component: 150  -  total flux cleaned = -5.03663e-05 Jy
! Component: 200  -  total flux cleaned = -3.09711e-05 Jy
! Total flux subtracted in 200 components = -3.09711e-05 Jy
! Clean residual min=-0.000762 max=0.000725 Jy/beam
! Clean residual mean=-0.000002 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.143723 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 174 components and 0.143723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049589Jy  sigma=1.351570
! Fit after  self-cal, rms=0.049588Jy  sigma=1.351563
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9224 mas, bmaj=1.534 mas, bpa=1.047 degrees
! Estimated noise=0.381179 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9224 x 1.534 at 1.047 degrees (North through East)
! Clean map  min=-0.00205  max=0.11151 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7341 mas, bmaj=1.251 mas, bpa=0.3193 degrees
! Estimated noise=0.732091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0846774 Jy
! Component: 100  -  total flux cleaned = 0.104476 Jy
! Component: 150  -  total flux cleaned = 0.113134 Jy
! Component: 200  -  total flux cleaned = 0.118852 Jy
! Total flux subtracted in 200 components = 0.118852 Jy
! Clean residual min=-0.004422 max=0.004639 Jy/beam
! Clean residual mean=-0.000013 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.118852 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.118852 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9224 mas, bmaj=1.534 mas, bpa=1.047 degrees
! Estimated noise=0.381179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00663958 Jy
! Component: 100  -  total flux cleaned = 0.0104683 Jy
! Component: 150  -  total flux cleaned = 0.0132758 Jy
! Component: 200  -  total flux cleaned = 0.0154063 Jy
! Total flux subtracted in 200 components = 0.0154063 Jy
! Clean residual min=-0.001888 max=0.002323 Jy/beam
! Clean residual mean=-0.000011 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.134258 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 61 components and 0.134258 Jy
! Inverting map 
! Added new window around map position (-36.6, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171163 Jy
! Component: 100  -  total flux cleaned = 0.00277842 Jy
! Component: 150  -  total flux cleaned = 0.00365917 Jy
! Component: 200  -  total flux cleaned = 0.00450491 Jy
! Total flux subtracted in 200 components = 0.00450491 Jy
! Clean residual min=-0.001614 max=0.001542 Jy/beam
! Clean residual mean=-0.000007 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.138763 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 85 components and 0.138763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.979 mas, bmaj=3.62 mas, bpa=-4.852 degrees
! Estimated noise=0.477186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152319 Jy
! Component: 100  -  total flux cleaned = 0.00190558 Jy
! Component: 150  -  total flux cleaned = 0.00235724 Jy
! Component: 200  -  total flux cleaned = 0.00274184 Jy
! Total flux subtracted in 200 components = 0.00274184 Jy
! Clean residual min=-0.001151 max=0.001075 Jy/beam
! Clean residual mean=-0.000007 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.141505 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001911 Jy
! Component: 100  -  total flux cleaned = 0.00033585 Jy
! Component: 150  -  total flux cleaned = 0.000378539 Jy
! Component: 200  -  total flux cleaned = 0.000456852 Jy
! Total flux subtracted in 200 components = 0.000456852 Jy
! Clean residual min=-0.000992 max=0.000989 Jy/beam
! Clean residual mean=-0.000005 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.141962 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 139 components and 0.141962 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9224 mas, bmaj=1.534 mas, bpa=1.047 degrees
! Estimated noise=0.381179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.67163e-05 Jy
! Component: 100  -  total flux cleaned = -8.52668e-05 Jy
! Component: 150  -  total flux cleaned = -8.48502e-05 Jy
! Component: 200  -  total flux cleaned = 1.26381e-05 Jy
! Total flux subtracted in 200 components = 1.26381e-05 Jy
! Clean residual min=-0.001359 max=0.001017 Jy/beam
! Clean residual mean=-0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.141974 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 155 components and 0.141974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049649Jy  sigma=1.352777
! Fit after  self-cal, rms=0.049637Jy  sigma=1.352520
wmodel /J1149+2824_X_map.mod
! wmodel: Unable to open new model file: /J1149+2824_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1149+2824_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9224 x 1.534 at 1.047 degrees (North through East)
! Clean map  min=-0.0015941  max=0.11146 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1149+2824_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.111458 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248494 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.668846 0.668846 1.33769 2.67539 5.35077 10.7015 21.4031 42.8062 85.6123
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.111 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  448.533 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1149+2824_X_dfm.log closed on Fri May 20 00:05:27 2016