! Started logfile: /scr/pima/bg219a_uvs/J1149+2824_S_uvs.log on Wed Apr  6 22:53:15 2016
obs /scr/pima/bg219a_uvs/J1149+2824_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1149+2824_S_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.985714 visibilities/baseline/integration-bin.
! Found source: J1149+2824
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1656 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1149+2824_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014264Jy  sigma=26.212409
! Fit after  self-cal, rms=0.883748Jy  sigma=22.797601
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=4.944 mas, bpa=-4.083 degrees
! Estimated noise=1.16672 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0882102 Jy
! Component: 100  -  total flux cleaned = 0.11145 Jy
! Total flux subtracted in 100 components = 0.11145 Jy
! Clean residual min=-0.006637 max=0.008911 Jy/beam
! Clean residual mean=-0.000038 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.11145 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.11145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052676Jy  sigma=1.239644
! Fit after  self-cal, rms=0.052622Jy  sigma=1.238115
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.485 mas, bmaj=5.846 mas, bpa=-1.488 degrees
! Estimated noise=0.750284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111855 Jy
! Component: 100  -  total flux cleaned = 0.0155691 Jy
! Component: 150  -  total flux cleaned = 0.0178321 Jy
! Component: 200  -  total flux cleaned = 0.0190503 Jy
! Total flux subtracted in 200 components = 0.0190503 Jy
! Clean residual min=-0.003338 max=0.003391 Jy/beam
! Clean residual mean=-0.000017 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.1305 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.1305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050538Jy  sigma=1.178417
! Fit after  self-cal, rms=0.050515Jy  sigma=1.177825
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.485 x 5.846 at -1.488 degrees (North through East)
! Clean map  min=-0.0031907  max=0.11496 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        0.96     NL        0.97     OV        1.02     
!   PT        0.97     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.050515Jy  sigma=1.177825
! Fit after  self-cal, rms=0.050234Jy  sigma=1.172570
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.475 mas, bmaj=5.833 mas, bpa=-1.306 degrees
! Estimated noise=0.747737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709229 Jy
! Component: 100  -  total flux cleaned = 0.000764032 Jy
! Component: 150  -  total flux cleaned = 0.000786748 Jy
! Component: 200  -  total flux cleaned = 0.000825916 Jy
! Total flux subtracted in 200 components = 0.000825916 Jy
! Clean residual min=-0.003313 max=0.003268 Jy/beam
! Clean residual mean=-0.000013 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.131326 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 0.131326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050192Jy  sigma=1.172037
! Fit after  self-cal, rms=0.050200Jy  sigma=1.171886
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050200Jy  sigma=1.171886
! Fit after  self-cal, rms=0.049744Jy  sigma=1.164358
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.468 mas, bmaj=5.839 mas, bpa=-1.405 degrees
! Estimated noise=0.746738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000676039 Jy
! Component: 100  -  total flux cleaned = 0.000758458 Jy
! Component: 150  -  total flux cleaned = 0.000830313 Jy
! Component: 200  -  total flux cleaned = 0.000893551 Jy
! Total flux subtracted in 200 components = 0.000893551 Jy
! Clean residual min=-0.002761 max=0.002804 Jy/beam
! Clean residual mean=-0.000004 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.132219 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 33 components and 0.132219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049704Jy  sigma=1.163804
! Fit after  self-cal, rms=0.049717Jy  sigma=1.163673
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95283e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113002 Jy
! Component: 150  -  total flux cleaned = 0.00015772 Jy
! Component: 200  -  total flux cleaned = 0.000157059 Jy
! Total flux subtracted in 200 components = 0.000157059 Jy
! Clean residual min=-0.002763 max=0.002789 Jy/beam
! Clean residual mean=-0.000004 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.132377 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 34 components and 0.132377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049701Jy  sigma=1.163529
! Fit after  self-cal, rms=0.049700Jy  sigma=1.163510
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049700Jy  sigma=1.163510
! Fit after  self-cal, rms=0.049553Jy  sigma=1.163237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.46 mas, bmaj=5.837 mas, bpa=-1.609 degrees
! Estimated noise=0.745663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479318 Jy
! Component: 100  -  total flux cleaned = 0.000536861 Jy
! Component: 150  -  total flux cleaned = 0.000586583 Jy
! Component: 200  -  total flux cleaned = 0.000630663 Jy
! Total flux subtracted in 200 components = 0.000630663 Jy
! Clean residual min=-0.002723 max=0.002746 Jy/beam
! Clean residual mean=-0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.133007 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 35 components and 0.133007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049533Jy  sigma=1.163005
! Fit after  self-cal, rms=0.049532Jy  sigma=1.162988
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16551e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010797 Jy
! Component: 150  -  total flux cleaned = 0.000129489 Jy
! Component: 200  -  total flux cleaned = 0.000159706 Jy
! Total flux subtracted in 200 components = 0.000159706 Jy
! Clean residual min=-0.002723 max=0.002745 Jy/beam
! Clean residual mean=-0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.133167 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 0.133167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049524Jy  sigma=1.162921
! Fit after  self-cal, rms=0.049524Jy  sigma=1.162911
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049524Jy  sigma=1.162911
! Fit after  self-cal, rms=0.049435Jy  sigma=1.162782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.962 mas, bmaj=13.29 mas, bpa=-3.936 degrees
! Estimated noise=0.927075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423004 Jy
! Component: 100  -  total flux cleaned = 0.000453133 Jy
! Component: 150  -  total flux cleaned = 0.000471921 Jy
! Component: 200  -  total flux cleaned = 0.00048107 Jy
! Total flux subtracted in 200 components = 0.00048107 Jy
! Clean residual min=-0.002105 max=0.002550 Jy/beam
! Clean residual mean=-0.000005 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.133648 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 42 components and 0.133648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049439Jy  sigma=1.162834
! Fit after  self-cal, rms=0.049437Jy  sigma=1.162794
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.01218e-05 Jy
! Component: 100  -  total flux cleaned = 3.80836e-05 Jy
! Component: 150  -  total flux cleaned = 4.70441e-05 Jy
! Component: 200  -  total flux cleaned = 6.36966e-05 Jy
! Total flux subtracted in 200 components = 6.36966e-05 Jy
! Clean residual min=-0.002116 max=0.002539 Jy/beam
! Clean residual mean=-0.000005 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.133712 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 44 components and 0.133712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049444Jy  sigma=1.162889
! Fit after  self-cal, rms=0.049443Jy  sigma=1.162864
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.454 mas, bmaj=5.834 mas, bpa=-1.733 degrees
! Estimated noise=0.745069 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.454 x 5.834 at -1.733 degrees (North through East)
! Clean map  min=-0.002522  max=0.11321 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.788 mas, bmaj=4.943 mas, bpa=-4.376 degrees
! Estimated noise=1.15182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.086989 Jy
! Component: 100  -  total flux cleaned = 0.111359 Jy
! Component: 150  -  total flux cleaned = 0.121004 Jy
! Component: 200  -  total flux cleaned = 0.125963 Jy
! Total flux subtracted in 200 components = 0.125963 Jy
! Clean residual min=-0.005176 max=0.005069 Jy/beam
! Clean residual mean=-0.000014 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.125963 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.125963 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.454 mas, bmaj=5.834 mas, bpa=-1.733 degrees
! Estimated noise=0.745069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038777 Jy
! Component: 100  -  total flux cleaned = 0.00565053 Jy
! Component: 150  -  total flux cleaned = 0.00660594 Jy
! Component: 200  -  total flux cleaned = 0.00713518 Jy
! Total flux subtracted in 200 components = 0.00713518 Jy
! Clean residual min=-0.002738 max=0.002666 Jy/beam
! Clean residual mean=-0.000004 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.133099 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 34 components and 0.133099 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.962 mas, bmaj=13.29 mas, bpa=-3.936 degrees
! Estimated noise=0.927075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439221 Jy
! Component: 100  -  total flux cleaned = 0.000460847 Jy
! Component: 150  -  total flux cleaned = 0.000481387 Jy
! Component: 200  -  total flux cleaned = 0.000500793 Jy
! Total flux subtracted in 200 components = 0.000500793 Jy
! Clean residual min=-0.002117 max=0.002549 Jy/beam
! Clean residual mean=-0.000006 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.133599 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.39112e-06 Jy
! Component: 100  -  total flux cleaned = 2.72393e-05 Jy
! Component: 150  -  total flux cleaned = 4.3977e-05 Jy
! Component: 200  -  total flux cleaned = 6.01934e-05 Jy
! Total flux subtracted in 200 components = 6.01934e-05 Jy
! Clean residual min=-0.002121 max=0.002542 Jy/beam
! Clean residual mean=-0.000005 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.13366 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 42 components and 0.13366 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.454 mas, bmaj=5.834 mas, bpa=-1.733 degrees
! Estimated noise=0.745069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.6713e-05 Jy
! Component: 100  -  total flux cleaned = 2.98509e-06 Jy
! Component: 150  -  total flux cleaned = -1.29418e-05 Jy
! Component: 200  -  total flux cleaned = -1.33287e-05 Jy
! Total flux subtracted in 200 components = -1.33287e-05 Jy
! Clean residual min=-0.002721 max=0.002712 Jy/beam
! Clean residual mean=-0.000003 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.133646 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 45 components and 0.133646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049438Jy  sigma=1.162854
! Fit after  self-cal, rms=0.049437Jy  sigma=1.162825
wmodel /scr/pima/bg219a_uvs/J1149+2824_S_map.mod
! Writing 45 model components to file: /scr/pima/bg219a_uvs/J1149+2824_S_map.mod
wobs /scr/pima/bg219a_uvs/J1149+2824_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J1149+2824_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J1149+2824_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J1149+2824_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343761 Jy
! Component: 100  -  total flux cleaned = -0.000613388 Jy
! Component: 150  -  total flux cleaned = -0.000696884 Jy
! Component: 200  -  total flux cleaned = -0.000899021 Jy
! Component: 250  -  total flux cleaned = -0.00109314 Jy
! Component: 300  -  total flux cleaned = -0.0011663 Jy
! Component: 350  -  total flux cleaned = -0.00102435 Jy
! Component: 400  -  total flux cleaned = -0.00102555 Jy
! Component: 450  -  total flux cleaned = -0.00102587 Jy
! Component: 500  -  total flux cleaned = -0.00118265 Jy
! Component: 550  -  total flux cleaned = -0.0012125 Jy
! Component: 600  -  total flux cleaned = -0.00133063 Jy
! Component: 650  -  total flux cleaned = -0.0015309 Jy
! Component: 700  -  total flux cleaned = -0.00167054 Jy
! Component: 750  -  total flux cleaned = -0.0018871 Jy
! Component: 800  -  total flux cleaned = -0.00193946 Jy
! Component: 850  -  total flux cleaned = -0.00201676 Jy
! Component: 900  -  total flux cleaned = -0.00216826 Jy
! Component: 950  -  total flux cleaned = -0.00221743 Jy
! Component: 1000  -  total flux cleaned = -0.00226586 Jy
! Component: 1050  -  total flux cleaned = -0.00231333 Jy
! Component: 1100  -  total flux cleaned = -0.00233633 Jy
! Component: 1150  -  total flux cleaned = -0.00235866 Jy
! Component: 1200  -  total flux cleaned = -0.0023587 Jy
! Component: 1250  -  total flux cleaned = -0.00235873 Jy
! Component: 1300  -  total flux cleaned = -0.00235863 Jy
! Component: 1350  -  total flux cleaned = -0.0023161 Jy
! Component: 1400  -  total flux cleaned = -0.00227449 Jy
! Component: 1450  -  total flux cleaned = -0.0022951 Jy
! Component: 1500  -  total flux cleaned = -0.00231518 Jy
! Component: 1550  -  total flux cleaned = -0.00229552 Jy
! Component: 1600  -  total flux cleaned = -0.00223662 Jy
! Component: 1650  -  total flux cleaned = -0.00221748 Jy
! Component: 1700  -  total flux cleaned = -0.00217968 Jy
! Component: 1750  -  total flux cleaned = -0.00217937 Jy
! Component: 1800  -  total flux cleaned = -0.00210548 Jy
! Component: 1850  -  total flux cleaned = -0.00206921 Jy
! Component: 1900  -  total flux cleaned = -0.00201544 Jy
! Component: 1950  -  total flux cleaned = -0.00205077 Jy
! Component: 2000  -  total flux cleaned = -0.0019983 Jy
! Component: 2050  -  total flux cleaned = -0.00201551 Jy
! Component: 2100  -  total flux cleaned = -0.00199826 Jy
! Component: 2150  -  total flux cleaned = -0.00196435 Jy
! Component: 2200  -  total flux cleaned = -0.00194759 Jy
! Component: 2250  -  total flux cleaned = -0.00193113 Jy
! Component: 2300  -  total flux cleaned = -0.00193115 Jy
! Component: 2350  -  total flux cleaned = -0.00189868 Jy
! Component: 2400  -  total flux cleaned = -0.00191463 Jy
! Component: 2450  -  total flux cleaned = -0.00193049 Jy
! Component: 2500  -  total flux cleaned = -0.00186707 Jy
! Component: 2550  -  total flux cleaned = -0.00186715 Jy
! Component: 2600  -  total flux cleaned = -0.00186713 Jy
! Component: 2650  -  total flux cleaned = -0.00189786 Jy
! Component: 2700  -  total flux cleaned = -0.00185188 Jy
! Component: 2750  -  total flux cleaned = -0.00185185 Jy
! Component: 2800  -  total flux cleaned = -0.00179165 Jy
! Component: 2850  -  total flux cleaned = -0.00174681 Jy
! Component: 2900  -  total flux cleaned = -0.00170232 Jy
! Component: 2950  -  total flux cleaned = -0.00167291 Jy
! Component: 3000  -  total flux cleaned = -0.00167291 Jy
! Component: 3050  -  total flux cleaned = -0.00162914 Jy
! Component: 3100  -  total flux cleaned = -0.00162916 Jy
! Component: 3150  -  total flux cleaned = -0.0015423 Jy
! Component: 3200  -  total flux cleaned = -0.00149901 Jy
! Component: 3250  -  total flux cleaned = -0.00139824 Jy
! Component: 3300  -  total flux cleaned = -0.00135523 Jy
! Component: 3350  -  total flux cleaned = -0.00128359 Jy
! Component: 3400  -  total flux cleaned = -0.00122637 Jy
! Component: 3450  -  total flux cleaned = -0.00115482 Jy
! Component: 3500  -  total flux cleaned = -0.00112627 Jy
! Component: 3550  -  total flux cleaned = -0.00105469 Jy
! Component: 3600  -  total flux cleaned = -0.00102598 Jy
! Component: 3650  -  total flux cleaned = -0.000954298 Jy
! Component: 3700  -  total flux cleaned = -0.000911119 Jy
! Component: 3750  -  total flux cleaned = -0.000839243 Jy
! Component: 3800  -  total flux cleaned = -0.000781643 Jy
! Component: 3850  -  total flux cleaned = -0.000709474 Jy
! Component: 3900  -  total flux cleaned = -0.000651531 Jy
! Component: 3950  -  total flux cleaned = -0.000593465 Jy
! Component: 4000  -  total flux cleaned = -0.000506108 Jy
! Component: 4050  -  total flux cleaned = -0.000462276 Jy
! Total flux subtracted in 4096 components = -0.000418396 Jy
! Clean residual min=-0.000744 max=0.000964 Jy/beam
! Clean residual mean=0.000008 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.133228 Jy
keep
! Adding 221 model components to the UV plane model.
! The established model now contains 266 components and 0.133228 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J1149+2824_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.454 x 5.834 at -1.733 degrees (North through East)
! Clean map  min=-0.0018908  max=0.11332 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1149+2824_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.113324 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000233634 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.618496 0.618496 1.23699 2.47399 4.94797 9.89594 19.7919 39.5838 79.1675
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  485.047 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1149+2824_S_uvs.log closed on Wed Apr  6 22:53:19 2016