! Started logfile: /scr/pima/bg219a_uvs/J1129-4435_S_dfm.log on Fri May 20 00:04:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1129-4435_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1129-4435_S_uva.fits
! AN table 1: 60 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.689683 visibilities/baseline/integration-bin.
! Found source: J1129-4435
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3476 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1129-4435_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015783Jy  sigma=16.174031
! Fit after  self-cal, rms=0.863781Jy  sigma=13.651655
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=8.184 mas, bpa=-10.34 degrees
! Estimated noise=1.37005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10335 Jy
! Component: 100  -  total flux cleaned = 0.130532 Jy
! Total flux subtracted in 100 components = 0.130532 Jy
! Clean residual min=-0.009121 max=0.013222 Jy/beam
! Clean residual mean=-0.000182 rms=0.002532 Jy/beam
! Combined flux in latest and established models = 0.130532 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.130532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088759Jy  sigma=1.332827
! Fit after  self-cal, rms=0.088671Jy  sigma=1.331707
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.872 mas, bmaj=9.893 mas, bpa=-8.994 degrees
! Estimated noise=0.809363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183678 Jy
! Component: 100  -  total flux cleaned = 0.0262155 Jy
! Component: 150  -  total flux cleaned = 0.0297617 Jy
! Component: 200  -  total flux cleaned = 0.0313752 Jy
! Total flux subtracted in 200 components = 0.0313752 Jy
! Clean residual min=-0.005720 max=0.009050 Jy/beam
! Clean residual mean=-0.000087 rms=0.001983 Jy/beam
! Combined flux in latest and established models = 0.161907 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 0.161907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085964Jy  sigma=1.265852
! Fit after  self-cal, rms=0.085970Jy  sigma=1.265143
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.872 x 9.893 at -8.994 degrees (North through East)
! Clean map  min=-0.0055974  max=0.14162 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.085970Jy  sigma=1.265143
! Fit after  self-cal, rms=0.085970Jy  sigma=1.265143
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.872 mas, bmaj=9.893 mas, bpa=-8.994 degrees
! Estimated noise=0.809363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000834719 Jy
! Component: 100  -  total flux cleaned = 0.000866798 Jy
! Component: 150  -  total flux cleaned = 0.000864939 Jy
! Component: 200  -  total flux cleaned = 0.000863794 Jy
! Total flux subtracted in 200 components = 0.000863794 Jy
! Clean residual min=-0.005752 max=0.008908 Jy/beam
! Clean residual mean=-0.000082 rms=0.001973 Jy/beam
! Combined flux in latest and established models = 0.162771 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 34 components and 0.162771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085959Jy  sigma=1.264565
! Fit after  self-cal, rms=0.085962Jy  sigma=1.264548
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085962Jy  sigma=1.264548
! Fit after  self-cal, rms=0.083302Jy  sigma=1.265433
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.891 mas, bmaj=9.96 mas, bpa=-9.029 degrees
! Estimated noise=0.769823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00602636 Jy
! Component: 100  -  total flux cleaned = -0.00814817 Jy
! Component: 150  -  total flux cleaned = -0.00913834 Jy
! Component: 200  -  total flux cleaned = -0.00939079 Jy
! Total flux subtracted in 200 components = -0.00939079 Jy
! Clean residual min=-0.005488 max=0.008287 Jy/beam
! Clean residual mean=-0.000086 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.15338 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.15338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082759Jy  sigma=1.260911
! Fit after  self-cal, rms=0.082822Jy  sigma=1.260754
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0068226 Jy
! Component: 100  -  total flux cleaned = 0.00730934 Jy
! Component: 150  -  total flux cleaned = 0.00768056 Jy
! Component: 200  -  total flux cleaned = 0.00768538 Jy
! Total flux subtracted in 200 components = 0.00768538 Jy
! Clean residual min=-0.004834 max=0.005879 Jy/beam
! Clean residual mean=-0.000027 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.161065 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 73 components and 0.161065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081949Jy  sigma=1.250513
! Fit after  self-cal, rms=0.081903Jy  sigma=1.248565
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081903Jy  sigma=1.248565
! Fit after  self-cal, rms=0.082367Jy  sigma=1.245869
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.897 mas, bmaj=9.987 mas, bpa=-8.846 degrees
! Estimated noise=0.765449 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.48146e-05 Jy
! Component: 100  -  total flux cleaned = -5.58527e-05 Jy
! Component: 150  -  total flux cleaned = -0.0001928 Jy
! Component: 200  -  total flux cleaned = -0.000251995 Jy
! Total flux subtracted in 200 components = -0.000251995 Jy
! Clean residual min=-0.003890 max=0.004370 Jy/beam
! Clean residual mean=-0.000011 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 0.160813 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 94 components and 0.160813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082194Jy  sigma=1.244137
! Fit after  self-cal, rms=0.082217Jy  sigma=1.243799
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000620708 Jy
! Component: 100  -  total flux cleaned = 0.000567991 Jy
! Component: 150  -  total flux cleaned = 0.000478995 Jy
! Component: 200  -  total flux cleaned = 0.00047915 Jy
! Total flux subtracted in 200 components = 0.00047915 Jy
! Clean residual min=-0.003936 max=0.004243 Jy/beam
! Clean residual mean=-0.000007 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.161292 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.161292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082144Jy  sigma=1.243061
! Fit after  self-cal, rms=0.082159Jy  sigma=1.242935
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082159Jy  sigma=1.242935
! Fit after  self-cal, rms=0.082020Jy  sigma=1.240006
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.425 mas, bmaj=29.77 mas, bpa=-0.08551 degrees
! Estimated noise=0.986507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709929 Jy
! Component: 100  -  total flux cleaned = 0.000821639 Jy
! Component: 150  -  total flux cleaned = 0.000927503 Jy
! Component: 200  -  total flux cleaned = 0.000977474 Jy
! Total flux subtracted in 200 components = 0.000977474 Jy
! Clean residual min=-0.004443 max=0.004391 Jy/beam
! Clean residual mean=-0.000032 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.16227 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 116 components and 0.16227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082009Jy  sigma=1.239876
! Fit after  self-cal, rms=0.082010Jy  sigma=1.239766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.43504e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107828 Jy
! Component: 150  -  total flux cleaned = 0.000129824 Jy
! Component: 200  -  total flux cleaned = 0.000151436 Jy
! Total flux subtracted in 200 components = 0.000151436 Jy
! Clean residual min=-0.004374 max=0.004322 Jy/beam
! Clean residual mean=-0.000028 rms=0.001312 Jy/beam
! Combined flux in latest and established models = 0.162421 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 120 components and 0.162421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082002Jy  sigma=1.239736
! Fit after  self-cal, rms=0.082005Jy  sigma=1.239719
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.885 mas, bmaj=9.951 mas, bpa=-8.735 degrees
! Estimated noise=0.762531 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.885 x 9.951 at -8.735 degrees (North through East)
! Clean map  min=-0.003514  max=0.12656 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.234 mas, bmaj=8.2 mas, bpa=-10.09 degrees
! Estimated noise=1.29787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0973789 Jy
! Component: 100  -  total flux cleaned = 0.123321 Jy
! Component: 150  -  total flux cleaned = 0.136674 Jy
! Component: 200  -  total flux cleaned = 0.14523 Jy
! Total flux subtracted in 200 components = 0.14523 Jy
! Clean residual min=-0.007144 max=0.006136 Jy/beam
! Clean residual mean=-0.000083 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 0.14523 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.14523 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.885 mas, bmaj=9.951 mas, bpa=-8.735 degrees
! Estimated noise=0.762531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00804739 Jy
! Component: 100  -  total flux cleaned = 0.0122368 Jy
! Component: 150  -  total flux cleaned = 0.0141823 Jy
! Component: 200  -  total flux cleaned = 0.0148255 Jy
! Total flux subtracted in 200 components = 0.0148255 Jy
! Clean residual min=-0.003680 max=0.004182 Jy/beam
! Clean residual mean=-0.000032 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.160056 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 47 components and 0.160056 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.425 mas, bmaj=29.77 mas, bpa=-0.08551 degrees
! Estimated noise=0.986507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192437 Jy
! Component: 100  -  total flux cleaned = 0.00224219 Jy
! Component: 150  -  total flux cleaned = 0.0022643 Jy
! Component: 200  -  total flux cleaned = 0.00228564 Jy
! Total flux subtracted in 200 components = 0.00228564 Jy
! Clean residual min=-0.004379 max=0.004341 Jy/beam
! Clean residual mean=-0.000030 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.162342 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.07419e-05 Jy
! Component: 100  -  total flux cleaned = 6.00099e-05 Jy
! Component: 150  -  total flux cleaned = 6.02622e-05 Jy
! Component: 200  -  total flux cleaned = 7.86667e-05 Jy
! Total flux subtracted in 200 components = 7.86667e-05 Jy
! Clean residual min=-0.004351 max=0.004300 Jy/beam
! Clean residual mean=-0.000028 rms=0.001293 Jy/beam
! Combined flux in latest and established models = 0.16242 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 59 components and 0.16242 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.885 mas, bmaj=9.951 mas, bpa=-8.735 degrees
! Estimated noise=0.762531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010393 Jy
! Component: 100  -  total flux cleaned = -0.000912919 Jy
! Component: 150  -  total flux cleaned = -0.000858203 Jy
! Component: 200  -  total flux cleaned = -0.000808547 Jy
! Total flux subtracted in 200 components = -0.000808547 Jy
! Clean residual min=-0.003642 max=0.003815 Jy/beam
! Clean residual mean=-0.000020 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.161612 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.161612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082001Jy  sigma=1.239581
! Fit after  self-cal, rms=0.081978Jy  sigma=1.239436
wmodel /J1129-4435_S_map.mod
! wmodel: Unable to open new model file: /J1129-4435_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1129-4435_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.885 x 9.951 at -8.735 degrees (North through East)
! Clean map  min=-0.0033681  max=0.12373 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1129-4435_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123728 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000992683 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.40693 2.40693 4.81385 9.6277 19.2554 38.5108 77.0216
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  124.64 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1129-4435_S_dfm.log closed on Fri May 20 00:04:53 2016