! Started logfile: /scr/pima/bg219a_uvs/J1120+0704_S_dfm.log on Fri May 20 00:04:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1120+0704_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1120+0704_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.809195 visibilities/baseline/integration-bin.
! Found source: J1120+0704
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2816 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1120+0704_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031521Jy  sigma=26.504622
! Fit after  self-cal, rms=0.783489Jy  sigma=20.071792
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.669 mas, bmaj=6.654 mas, bpa=-7.189 degrees
! Estimated noise=0.810048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167091 Jy
! Component: 100  -  total flux cleaned = 0.2039 Jy
! Total flux subtracted in 100 components = 0.2039 Jy
! Clean residual min=-0.008246 max=0.012233 Jy/beam
! Clean residual mean=-0.000218 rms=0.002603 Jy/beam
! Combined flux in latest and established models = 0.203901 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.203901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055635Jy  sigma=1.368945
! Fit after  self-cal, rms=0.055630Jy  sigma=1.367466
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=7.652 mas, bpa=-6.461 degrees
! Estimated noise=0.539699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016135 Jy
! Component: 100  -  total flux cleaned = 0.0233912 Jy
! Component: 150  -  total flux cleaned = 0.0267325 Jy
! Component: 200  -  total flux cleaned = 0.0280717 Jy
! Total flux subtracted in 200 components = 0.0280717 Jy
! Clean residual min=-0.006639 max=0.010953 Jy/beam
! Clean residual mean=-0.000117 rms=0.002042 Jy/beam
! Combined flux in latest and established models = 0.231972 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.231972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051249Jy  sigma=1.258255
! Fit after  self-cal, rms=0.051243Jy  sigma=1.256919
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.129 x 7.652 at -6.461 degrees (North through East)
! Clean map  min=-0.0063133  max=0.21799 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.98     NL        1.05     OV        1.00     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.10     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.04     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.05     OV        0.97     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.051243Jy  sigma=1.256919
! Fit after  self-cal, rms=0.050777Jy  sigma=1.236291
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.652 mas, bpa=-6.337 degrees
! Estimated noise=0.538792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10, -46.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00684313 Jy
! Component: 100  -  total flux cleaned = 0.00773906 Jy
! Component: 150  -  total flux cleaned = 0.00854795 Jy
! Component: 200  -  total flux cleaned = 0.00923304 Jy
! Total flux subtracted in 200 components = 0.00923304 Jy
! Clean residual min=-0.004304 max=0.005593 Jy/beam
! Clean residual mean=-0.000078 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.241205 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.241205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049618Jy  sigma=1.208393
! Fit after  self-cal, rms=0.049576Jy  sigma=1.207546
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049576Jy  sigma=1.207546
! Fit after  self-cal, rms=0.048770Jy  sigma=1.194989
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.118 mas, bmaj=7.647 mas, bpa=-6.338 degrees
! Estimated noise=0.535791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218576 Jy
! Component: 100  -  total flux cleaned = 0.00255331 Jy
! Component: 150  -  total flux cleaned = 0.00275413 Jy
! Component: 200  -  total flux cleaned = 0.00266954 Jy
! Total flux subtracted in 200 components = 0.00266954 Jy
! Clean residual min=-0.003178 max=0.003088 Jy/beam
! Clean residual mean=-0.000005 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.243875 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.243875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048598Jy  sigma=1.191299
! Fit after  self-cal, rms=0.048582Jy  sigma=1.191145
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282985 Jy
! Component: 100  -  total flux cleaned = 0.000211789 Jy
! Component: 150  -  total flux cleaned = 0.000145853 Jy
! Component: 200  -  total flux cleaned = 0.000116298 Jy
! Total flux subtracted in 200 components = 0.000116298 Jy
! Clean residual min=-0.003190 max=0.002956 Jy/beam
! Clean residual mean=-0.000005 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.243991 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.243991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048536Jy  sigma=1.190174
! Fit after  self-cal, rms=0.048535Jy  sigma=1.190162
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048535Jy  sigma=1.190162
! Fit after  self-cal, rms=0.048431Jy  sigma=1.189972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=7.64 mas, bpa=-6.282 degrees
! Estimated noise=0.535276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202376 Jy
! Component: 100  -  total flux cleaned = 0.000176064 Jy
! Component: 150  -  total flux cleaned = 0.000102746 Jy
! Component: 200  -  total flux cleaned = 0.000126033 Jy
! Total flux subtracted in 200 components = 0.000126033 Jy
! Clean residual min=-0.003075 max=0.002997 Jy/beam
! Clean residual mean=-0.000001 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.244117 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.244117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048401Jy  sigma=1.189393
! Fit after  self-cal, rms=0.048398Jy  sigma=1.189378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.7562e-05 Jy
! Component: 100  -  total flux cleaned = -9.70677e-05 Jy
! Component: 150  -  total flux cleaned = -7.61467e-05 Jy
! Component: 200  -  total flux cleaned = -9.62225e-05 Jy
! Total flux subtracted in 200 components = -9.62225e-05 Jy
! Clean residual min=-0.003066 max=0.003014 Jy/beam
! Clean residual mean=-0.000002 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.244021 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.244021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048380Jy  sigma=1.189020
! Fit after  self-cal, rms=0.048380Jy  sigma=1.189015
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048380Jy  sigma=1.189015
! Fit after  self-cal, rms=0.048316Jy  sigma=1.188977
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.252 mas, bmaj=17.66 mas, bpa=-14.84 degrees
! Estimated noise=0.702218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133281 Jy
! Component: 100  -  total flux cleaned = 0.000221966 Jy
! Component: 150  -  total flux cleaned = 0.000323103 Jy
! Component: 200  -  total flux cleaned = 0.000394477 Jy
! Total flux subtracted in 200 components = 0.000394477 Jy
! Clean residual min=-0.003360 max=0.003299 Jy/beam
! Clean residual mean=0.000009 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.244415 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 74 components and 0.244415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048325Jy  sigma=1.189187
! Fit after  self-cal, rms=0.048324Jy  sigma=1.189160
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.07075e-05 Jy
! Component: 100  -  total flux cleaned = 5.31005e-05 Jy
! Component: 150  -  total flux cleaned = 9.31503e-05 Jy
! Component: 200  -  total flux cleaned = 0.000112385 Jy
! Total flux subtracted in 200 components = 0.000112385 Jy
! Clean residual min=-0.003304 max=0.003237 Jy/beam
! Clean residual mean=0.000012 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.244528 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.244528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048333Jy  sigma=1.189382
! Fit after  self-cal, rms=0.048334Jy  sigma=1.189370
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=7.636 mas, bpa=-6.262 degrees
! Estimated noise=0.53482 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.115 x 7.636 at -6.262 degrees (North through East)
! Clean map  min=-0.0037045  max=0.21876 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.661 mas, bmaj=6.651 mas, bpa=-6.98 degrees
! Estimated noise=0.798871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164687 Jy
! Component: 100  -  total flux cleaned = 0.201443 Jy
! Component: 150  -  total flux cleaned = 0.215116 Jy
! Component: 200  -  total flux cleaned = 0.223748 Jy
! Total flux subtracted in 200 components = 0.223748 Jy
! Clean residual min=-0.005790 max=0.007678 Jy/beam
! Clean residual mean=-0.000063 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 0.223748 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.223748 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=7.636 mas, bpa=-6.262 degrees
! Estimated noise=0.53482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864845 Jy
! Component: 100  -  total flux cleaned = 0.0138961 Jy
! Component: 150  -  total flux cleaned = 0.0175059 Jy
! Component: 200  -  total flux cleaned = 0.0191265 Jy
! Total flux subtracted in 200 components = 0.0191265 Jy
! Clean residual min=-0.003394 max=0.003212 Jy/beam
! Clean residual mean=0.000016 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.242874 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.242874 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.252 mas, bmaj=17.66 mas, bpa=-14.84 degrees
! Estimated noise=0.702218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021415 Jy
! Component: 100  -  total flux cleaned = 0.00246882 Jy
! Component: 150  -  total flux cleaned = 0.00279648 Jy
! Component: 200  -  total flux cleaned = 0.00311979 Jy
! Total flux subtracted in 200 components = 0.00311979 Jy
! Clean residual min=-0.003190 max=0.002983 Jy/beam
! Clean residual mean=0.000048 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.245994 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178845 Jy
! Component: 100  -  total flux cleaned = 0.000376134 Jy
! Component: 150  -  total flux cleaned = 0.000526858 Jy
! Component: 200  -  total flux cleaned = 0.000555648 Jy
! Total flux subtracted in 200 components = 0.000555648 Jy
! Clean residual min=-0.003036 max=0.002934 Jy/beam
! Clean residual mean=0.000047 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.24655 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.24655 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=7.636 mas, bpa=-6.262 degrees
! Estimated noise=0.53482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.37452e-05 Jy
! Component: 100  -  total flux cleaned = -9.10691e-05 Jy
! Component: 150  -  total flux cleaned = -0.000185984 Jy
! Component: 200  -  total flux cleaned = -0.000227517 Jy
! Total flux subtracted in 200 components = -0.000227517 Jy
! Clean residual min=-0.002704 max=0.002735 Jy/beam
! Clean residual mean=0.000021 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.246322 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.246322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048136Jy  sigma=1.185581
! Fit after  self-cal, rms=0.048127Jy  sigma=1.185115
wmodel /J1120+0704_S_map.mod
! wmodel: Unable to open new model file: /J1120+0704_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1120+0704_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.115 x 7.636 at -6.262 degrees (North through East)
! Clean map  min=-0.0025807  max=0.21771 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1120+0704_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217709 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000664258 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.915341 0.915341 1.83068 3.66136 7.32273 14.6455 29.2909 58.5818
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  327.746 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1120+0704_S_dfm.log closed on Fri May 20 00:04:39 2016