! Started logfile: /scr/pima/bg219a_uvs/J1116+0829_X_dfm.log on Fri May 20 00:04:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1116+0829_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1116+0829_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.790476 visibilities/baseline/integration-bin.
! Found source: J1116+0829
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 3984 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1116+0829_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027029Jy  sigma=29.907904
! Fit after  self-cal, rms=0.838847Jy  sigma=24.420092
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6631 mas, bmaj=1.639 mas, bpa=-2.774 degrees
! Estimated noise=0.617407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121482 Jy
! Component: 100  -  total flux cleaned = 0.149846 Jy
! Total flux subtracted in 100 components = 0.149846 Jy
! Clean residual min=-0.009128 max=0.011086 Jy/beam
! Clean residual mean=0.000039 rms=0.002169 Jy/beam
! Combined flux in latest and established models = 0.149846 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.149846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057222Jy  sigma=1.665160
! Fit after  self-cal, rms=0.056925Jy  sigma=1.655840
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8099 mas, bmaj=1.918 mas, bpa=-4.19 degrees
! Estimated noise=0.420427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018644 Jy
! Component: 100  -  total flux cleaned = 0.0277626 Jy
! Component: 150  -  total flux cleaned = 0.0326254 Jy
! Component: 200  -  total flux cleaned = 0.0353655 Jy
! Total flux subtracted in 200 components = 0.0353655 Jy
! Clean residual min=-0.004273 max=0.007056 Jy/beam
! Clean residual mean=0.000031 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 0.185211 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.185211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051405Jy  sigma=1.473718
! Fit after  self-cal, rms=0.051375Jy  sigma=1.471811
! Inverting map 
! Added new window around map position (-5.2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621899 Jy
! Component: 100  -  total flux cleaned = 0.00888648 Jy
! Component: 150  -  total flux cleaned = 0.0101294 Jy
! Component: 200  -  total flux cleaned = 0.0111253 Jy
! Total flux subtracted in 200 components = 0.0111253 Jy
! Clean residual min=-0.002884 max=0.002965 Jy/beam
! Clean residual mean=0.000016 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.196336 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.196336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050641Jy  sigma=1.450124
! Fit after  self-cal, rms=0.050586Jy  sigma=1.448607
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8099 x 1.918 at -4.19 degrees (North through East)
! Clean map  min=-0.0027676  max=0.1618 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.02     NL        1.05     OV        1.03     
!   PT        0.97     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.02     NL        1.00     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.07     NL        0.98     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.04     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.00     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.00     OV        1.01     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.96     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        0.98     OV        1.00     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        0.98     OV        1.03     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.97     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        0.99     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.050586Jy  sigma=1.448607
! Fit after  self-cal, rms=0.050146Jy  sigma=1.438908
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8106 mas, bmaj=1.922 mas, bpa=-4.251 degrees
! Estimated noise=0.418823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000628177 Jy
! Component: 100  -  total flux cleaned = 0.000599781 Jy
! Component: 150  -  total flux cleaned = 0.000488279 Jy
! Component: 200  -  total flux cleaned = 0.000420341 Jy
! Total flux subtracted in 200 components = 0.000420341 Jy
! Clean residual min=-0.002298 max=0.002803 Jy/beam
! Clean residual mean=0.000007 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.196757 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.196757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050102Jy  sigma=1.438106
! Fit after  self-cal, rms=0.050097Jy  sigma=1.437964
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050097Jy  sigma=1.437964
! Fit after  self-cal, rms=0.049902Jy  sigma=1.431051
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8109 mas, bmaj=1.922 mas, bpa=-4.308 degrees
! Estimated noise=0.418433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000235073 Jy
! Component: 100  -  total flux cleaned = -0.000367373 Jy
! Component: 150  -  total flux cleaned = -0.000418312 Jy
! Component: 200  -  total flux cleaned = -0.000470853 Jy
! Total flux subtracted in 200 components = -0.000470853 Jy
! Clean residual min=-0.002223 max=0.002570 Jy/beam
! Clean residual mean=0.000005 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.196286 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.196286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049889Jy  sigma=1.430907
! Fit after  self-cal, rms=0.049891Jy  sigma=1.430836
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, 34.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229882 Jy
! Component: 100  -  total flux cleaned = 0.00346043 Jy
! Component: 150  -  total flux cleaned = 0.00370716 Jy
! Component: 200  -  total flux cleaned = 0.00389268 Jy
! Total flux subtracted in 200 components = 0.00389268 Jy
! Clean residual min=-0.001862 max=0.001577 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.200179 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.200179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049779Jy  sigma=1.427465
! Fit after  self-cal, rms=0.049771Jy  sigma=1.427294
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049771Jy  sigma=1.427294
! Fit after  self-cal, rms=0.049655Jy  sigma=1.426921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8123 mas, bmaj=1.924 mas, bpa=-4.323 degrees
! Estimated noise=0.417249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0008423 Jy
! Component: 100  -  total flux cleaned = 0.00101519 Jy
! Component: 150  -  total flux cleaned = 0.00113853 Jy
! Component: 200  -  total flux cleaned = 0.0012053 Jy
! Total flux subtracted in 200 components = 0.0012053 Jy
! Clean residual min=-0.001720 max=0.001682 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.201384 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.201384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049625Jy  sigma=1.426105
! Fit after  self-cal, rms=0.049625Jy  sigma=1.426074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.01393e-05 Jy
! Component: 100  -  total flux cleaned = 0.000170388 Jy
! Component: 150  -  total flux cleaned = 0.000207147 Jy
! Component: 200  -  total flux cleaned = 0.000257862 Jy
! Total flux subtracted in 200 components = 0.000257862 Jy
! Clean residual min=-0.001644 max=0.001666 Jy/beam
! Clean residual mean=-0.000001 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.201642 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.201642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049611Jy  sigma=1.425743
! Fit after  self-cal, rms=0.049610Jy  sigma=1.425729
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049610Jy  sigma=1.425729
! Fit after  self-cal, rms=0.049583Jy  sigma=1.425649
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=4.887 mas, bpa=-14.52 degrees
! Estimated noise=0.561553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299418 Jy
! Component: 100  -  total flux cleaned = 0.000179481 Jy
! Component: 150  -  total flux cleaned = 0.000198323 Jy
! Component: 200  -  total flux cleaned = 0.000235199 Jy
! Total flux subtracted in 200 components = 0.000235199 Jy
! Clean residual min=-0.001533 max=0.001651 Jy/beam
! Clean residual mean=-0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.201877 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 106 components and 0.201877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049576Jy  sigma=1.425658
! Fit after  self-cal, rms=0.049577Jy  sigma=1.425619
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.99871e-05 Jy
! Component: 100  -  total flux cleaned = 0.000151405 Jy
! Component: 150  -  total flux cleaned = 0.000198826 Jy
! Component: 200  -  total flux cleaned = 0.000213444 Jy
! Total flux subtracted in 200 components = 0.000213444 Jy
! Clean residual min=-0.001548 max=0.001658 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.20209 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 108 components and 0.20209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049576Jy  sigma=1.425717
! Fit after  self-cal, rms=0.049576Jy  sigma=1.425706
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8126 mas, bmaj=1.925 mas, bpa=-4.308 degrees
! Estimated noise=0.416994 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8126 x 1.925 at -4.308 degrees (North through East)
! Clean map  min=-0.0016649  max=0.16143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6655 mas, bmaj=1.643 mas, bpa=-2.915 degrees
! Estimated noise=0.615491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121059 Jy
! Component: 100  -  total flux cleaned = 0.149204 Jy
! Component: 150  -  total flux cleaned = 0.161927 Jy
! Component: 200  -  total flux cleaned = 0.170196 Jy
! Total flux subtracted in 200 components = 0.170196 Jy
! Clean residual min=-0.004005 max=0.005510 Jy/beam
! Clean residual mean=0.000019 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.170196 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.170196 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8126 mas, bmaj=1.925 mas, bpa=-4.308 degrees
! Estimated noise=0.416994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00885868 Jy
! Component: 100  -  total flux cleaned = 0.0139408 Jy
! Component: 150  -  total flux cleaned = 0.0174561 Jy
! Component: 200  -  total flux cleaned = 0.0201767 Jy
! Total flux subtracted in 200 components = 0.0201767 Jy
! Clean residual min=-0.002934 max=0.002958 Jy/beam
! Clean residual mean=0.000015 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.190373 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 42 components and 0.190373 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=4.887 mas, bpa=-14.52 degrees
! Estimated noise=0.561553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391139 Jy
! Component: 100  -  total flux cleaned = 0.00632991 Jy
! Component: 150  -  total flux cleaned = 0.00733793 Jy
! Component: 200  -  total flux cleaned = 0.00810301 Jy
! Total flux subtracted in 200 components = 0.00810301 Jy
! Clean residual min=-0.002250 max=0.002182 Jy/beam
! Clean residual mean=0.000012 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.198476 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000682754 Jy
! Component: 100  -  total flux cleaned = 0.00122216 Jy
! Component: 150  -  total flux cleaned = 0.00168756 Jy
! Component: 200  -  total flux cleaned = 0.00208789 Jy
! Total flux subtracted in 200 components = 0.00208789 Jy
! Clean residual min=-0.001894 max=0.001691 Jy/beam
! Clean residual mean=0.000005 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.200563 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 75 components and 0.200563 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8126 mas, bmaj=1.925 mas, bpa=-4.308 degrees
! Estimated noise=0.416994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000615779 Jy
! Component: 100  -  total flux cleaned = 0.000942112 Jy
! Component: 150  -  total flux cleaned = 0.00126113 Jy
! Component: 200  -  total flux cleaned = 0.00130114 Jy
! Total flux subtracted in 200 components = 0.00130114 Jy
! Clean residual min=-0.001996 max=0.001742 Jy/beam
! Clean residual mean=0.000000 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.201865 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.201865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049624Jy  sigma=1.427086
! Fit after  self-cal, rms=0.049610Jy  sigma=1.426700
wmodel /J1116+0829_X_map.mod
! wmodel: Unable to open new model file: /J1116+0829_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1116+0829_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8126 x 1.925 at -4.308 degrees (North through East)
! Clean map  min=-0.0018215  max=0.16155 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1116+0829_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.161547 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000406597 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.755071 0.755071 1.51014 3.02028 6.04057 12.0811 24.1623 48.3245 96.6491
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.161 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  397.313 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1116+0829_X_dfm.log closed on Fri May 20 00:04:28 2016