! Started logfile: /scr/pima/bg219a_uvs/J1106+2812_S_dfm.log on Fri May 20 00:03:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1106+2812_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1106+2812_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.82963 visibilities/baseline/integration-bin.
! Found source: J1106+2812
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1792 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1106+2812_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026957Jy  sigma=27.950228
! Fit after  self-cal, rms=0.857474Jy  sigma=23.310998
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.86 mas, bmaj=4.7 mas, bpa=-5.886 degrees
! Estimated noise=0.952537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110022 Jy
! Component: 100  -  total flux cleaned = 0.134193 Jy
! Total flux subtracted in 100 components = 0.134193 Jy
! Clean residual min=-0.005519 max=0.007295 Jy/beam
! Clean residual mean=0.000017 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.134193 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.134193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048471Jy  sigma=1.256650
! Fit after  self-cal, rms=0.048457Jy  sigma=1.256176
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.341 mas, bmaj=5.731 mas, bpa=0.2973 degrees
! Estimated noise=0.661467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00970145 Jy
! Component: 100  -  total flux cleaned = 0.0138387 Jy
! Component: 150  -  total flux cleaned = 0.0158117 Jy
! Component: 200  -  total flux cleaned = 0.0160166 Jy
! Total flux subtracted in 200 components = 0.0160166 Jy
! Clean residual min=-0.003053 max=0.003316 Jy/beam
! Clean residual mean=-0.000007 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.15021 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.15021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046674Jy  sigma=1.208968
! Fit after  self-cal, rms=0.046680Jy  sigma=1.208678
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.341 x 5.731 at 0.2973 degrees (North through East)
! Clean map  min=-0.0029173  max=0.14329 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.04     NL        0.98     OV        1.03     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.02     OV        1.00     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.01     OV        0.96     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        0.99     OV        0.98     
!   PT        1.01     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.046680Jy  sigma=1.208678
! Fit after  self-cal, rms=0.046129Jy  sigma=1.201229
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=5.72 mas, bpa=0.5821 degrees
! Estimated noise=0.658676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132785 Jy
! Component: 100  -  total flux cleaned = 9.85115e-05 Jy
! Component: 150  -  total flux cleaned = 6.71679e-05 Jy
! Component: 200  -  total flux cleaned = 1.07235e-05 Jy
! Total flux subtracted in 200 components = 1.07235e-05 Jy
! Clean residual min=-0.002534 max=0.003226 Jy/beam
! Clean residual mean=-0.000005 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.15022 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.15022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046076Jy  sigma=1.200202
! Fit after  self-cal, rms=0.046074Jy  sigma=1.200078
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046074Jy  sigma=1.200078
! Fit after  self-cal, rms=0.046039Jy  sigma=1.195021
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.329 mas, bmaj=5.711 mas, bpa=0.491 degrees
! Estimated noise=0.657983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199254 Jy
! Component: 100  -  total flux cleaned = 0.000145018 Jy
! Component: 150  -  total flux cleaned = 6.99281e-05 Jy
! Component: 200  -  total flux cleaned = 2.50187e-05 Jy
! Total flux subtracted in 200 components = 2.50187e-05 Jy
! Clean residual min=-0.002419 max=0.002743 Jy/beam
! Clean residual mean=-0.000004 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.150245 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.150245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046005Jy  sigma=1.194341
! Fit after  self-cal, rms=0.046015Jy  sigma=1.194282
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (97.5, -83.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000926114 Jy
! Component: 100  -  total flux cleaned = 0.000759885 Jy
! Component: 150  -  total flux cleaned = 0.000682142 Jy
! Component: 200  -  total flux cleaned = 0.000771072 Jy
! Total flux subtracted in 200 components = 0.000771072 Jy
! Clean residual min=-0.002311 max=0.002076 Jy/beam
! Clean residual mean=-0.000004 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.151016 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.151016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045860Jy  sigma=1.190672
! Fit after  self-cal, rms=0.045853Jy  sigma=1.190504
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045853Jy  sigma=1.190504
! Fit after  self-cal, rms=0.045656Jy  sigma=1.190164
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.324 mas, bmaj=5.705 mas, bpa=0.4812 degrees
! Estimated noise=0.656262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.98875e-05 Jy
! Component: 100  -  total flux cleaned = -3.94352e-05 Jy
! Component: 150  -  total flux cleaned = -1.53649e-05 Jy
! Component: 200  -  total flux cleaned = 3.14076e-06 Jy
! Total flux subtracted in 200 components = 3.14076e-06 Jy
! Clean residual min=-0.002169 max=0.002123 Jy/beam
! Clean residual mean=-0.000005 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.15102 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.15102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045625Jy  sigma=1.189512
! Fit after  self-cal, rms=0.045621Jy  sigma=1.189486
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.18005e-05 Jy
! Component: 100  -  total flux cleaned = -6.37989e-05 Jy
! Component: 150  -  total flux cleaned = -6.41001e-05 Jy
! Component: 200  -  total flux cleaned = -6.4025e-05 Jy
! Total flux subtracted in 200 components = -6.4025e-05 Jy
! Clean residual min=-0.002124 max=0.002133 Jy/beam
! Clean residual mean=-0.000005 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.150956 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.150956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045608Jy  sigma=1.189210
! Fit after  self-cal, rms=0.045608Jy  sigma=1.189202
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045608Jy  sigma=1.189202
! Fit after  self-cal, rms=0.045575Jy  sigma=1.189128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.508 mas, bmaj=12.53 mas, bpa=-10.54 degrees
! Estimated noise=0.859279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.0527e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114491 Jy
! Component: 150  -  total flux cleaned = 0.000134823 Jy
! Component: 200  -  total flux cleaned = 0.000134687 Jy
! Total flux subtracted in 200 components = 0.000134687 Jy
! Clean residual min=-0.002228 max=0.001977 Jy/beam
! Clean residual mean=-0.000010 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.15109 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 68 components and 0.15109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045572Jy  sigma=1.188995
! Fit after  self-cal, rms=0.045570Jy  sigma=1.188965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.18231e-06 Jy
! Component: 100  -  total flux cleaned = -2.78816e-05 Jy
! Component: 150  -  total flux cleaned = -2.77653e-05 Jy
! Component: 200  -  total flux cleaned = -2.79459e-05 Jy
! Total flux subtracted in 200 components = -2.79459e-05 Jy
! Clean residual min=-0.002224 max=0.001955 Jy/beam
! Clean residual mean=-0.000010 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.151062 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 0.151062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045569Jy  sigma=1.188905
! Fit after  self-cal, rms=0.045569Jy  sigma=1.188891
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.701 mas, bpa=0.4651 degrees
! Estimated noise=0.656062 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 5.701 at 0.4651 degrees (North through East)
! Clean map  min=-0.0019997  max=0.14341 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.847 mas, bmaj=4.678 mas, bpa=-5.576 degrees
! Estimated noise=0.939457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108463 Jy
! Component: 100  -  total flux cleaned = 0.132496 Jy
! Component: 150  -  total flux cleaned = 0.140385 Jy
! Component: 200  -  total flux cleaned = 0.142239 Jy
! Total flux subtracted in 200 components = 0.142239 Jy
! Clean residual min=-0.004147 max=0.003816 Jy/beam
! Clean residual mean=0.000008 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.142239 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.142239 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.701 mas, bpa=0.4651 degrees
! Estimated noise=0.656062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461387 Jy
! Component: 100  -  total flux cleaned = 0.00669732 Jy
! Component: 150  -  total flux cleaned = 0.00779126 Jy
! Component: 200  -  total flux cleaned = 0.00838392 Jy
! Total flux subtracted in 200 components = 0.00838392 Jy
! Clean residual min=-0.002309 max=0.002354 Jy/beam
! Clean residual mean=-0.000002 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.150623 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.150623 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.508 mas, bmaj=12.53 mas, bpa=-10.54 degrees
! Estimated noise=0.859279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00091555 Jy
! Component: 100  -  total flux cleaned = 0.00100581 Jy
! Component: 150  -  total flux cleaned = 0.000981513 Jy
! Component: 200  -  total flux cleaned = 0.000941785 Jy
! Total flux subtracted in 200 components = 0.000941785 Jy
! Clean residual min=-0.002297 max=0.001920 Jy/beam
! Clean residual mean=-0.000009 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.151565 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.58662e-05 Jy
! Component: 100  -  total flux cleaned = -3.11492e-05 Jy
! Component: 150  -  total flux cleaned = -5.771e-05 Jy
! Component: 200  -  total flux cleaned = -4.52671e-05 Jy
! Total flux subtracted in 200 components = -4.52671e-05 Jy
! Clean residual min=-0.002269 max=0.001941 Jy/beam
! Clean residual mean=-0.000009 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.151519 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 0.151519 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=5.701 mas, bpa=0.4651 degrees
! Estimated noise=0.656062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.8231e-05 Jy
! Component: 100  -  total flux cleaned = -0.000221268 Jy
! Component: 150  -  total flux cleaned = -0.000280016 Jy
! Component: 200  -  total flux cleaned = -0.000361107 Jy
! Total flux subtracted in 200 components = -0.000361107 Jy
! Clean residual min=-0.002182 max=0.002102 Jy/beam
! Clean residual mean=-0.000005 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.151158 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.151158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045606Jy  sigma=1.189638
! Fit after  self-cal, rms=0.045606Jy  sigma=1.189618
wmodel /J1106+2812_S_map.mod
! wmodel: Unable to open new model file: /J1106+2812_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1106+2812_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 5.701 at 0.4651 degrees (North through East)
! Clean map  min=-0.0020342  max=0.1428 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1106+2812_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.142802 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000520649 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.09379 1.09379 2.18757 4.37515 8.7503 17.5006 35.0012 70.0024
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  274.276 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1106+2812_S_dfm.log closed on Fri May 20 00:03:50 2016