! Started logfile: /scr/pima/bg219a_uvs/J1105+0202_S_uvs.log on Wed Apr 6 22:52:09 2016 obs /scr/pima/bg219a_uvs/J1105+0202_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1105+0202_S_uva.fits ! AN table 1: 29 integrations on 15 of 15 possible baselines. ! AN table 2: 28 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.989474 visibilities/baseline/integration-bin. ! Found source: J1105+0202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3384 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1105+0202_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.029310Jy sigma=24.852514 ! Fit after self-cal, rms=0.776291Jy sigma=18.735802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=7.393 mas, bpa=-7.08 degrees ! Estimated noise=0.753482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166627 Jy ! Component: 100 - total flux cleaned = 0.213578 Jy ! Total flux subtracted in 100 components = 0.213578 Jy ! Clean residual min=-0.016530 max=0.021518 Jy/beam ! Clean residual mean=-0.000164 rms=0.004929 Jy/beam ! Combined flux in latest and established models = 0.213578 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.213578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078122Jy sigma=1.844927 ! Fit after self-cal, rms=0.077787Jy sigma=1.838316 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.392 mas, bpa=-8.387 degrees ! Estimated noise=0.514702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279604 Jy ! Component: 100 - total flux cleaned = 0.0406967 Jy ! Component: 150 - total flux cleaned = 0.047478 Jy ! Component: 200 - total flux cleaned = 0.0511837 Jy ! Total flux subtracted in 200 components = 0.0511837 Jy ! Clean residual min=-0.008407 max=0.009382 Jy/beam ! Clean residual mean=-0.000118 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.264762 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.264762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067795Jy sigma=1.611939 ! Fit after self-cal, rms=0.067823Jy sigma=1.611091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.392 at -8.387 degrees (North through East) ! Clean map min=-0.0079285 max=0.22402 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 LA 0.99 MK 0.90 NL 1.00 ! OV 1.02 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 LA 0.98 MK 0.86 NL 1.00 ! OV 1.01 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 LA 0.99 MK 0.87 NL 0.97 ! OV 1.02 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 0.96 MK 0.86 NL 1.01 ! OV 1.00 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067823Jy sigma=1.611091 ! Fit after self-cal, rms=0.065289Jy sigma=1.572818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.417 mas, bpa=-9.253 degrees ! Estimated noise=0.498151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485955 Jy ! Component: 100 - total flux cleaned = 0.00110312 Jy ! Component: 150 - total flux cleaned = 0.00136863 Jy ! Component: 200 - total flux cleaned = 0.00131035 Jy ! Total flux subtracted in 200 components = 0.00131035 Jy ! Clean residual min=-0.006628 max=0.007581 Jy/beam ! Clean residual mean=-0.000044 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.266072 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.266072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064625Jy sigma=1.556890 ! Fit after self-cal, rms=0.064634Jy sigma=1.556775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064634Jy sigma=1.556775 ! Fit after self-cal, rms=0.064071Jy sigma=1.540575 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=8.409 mas, bpa=-9.584 degrees ! Estimated noise=0.489609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150419 Jy ! Component: 100 - total flux cleaned = -0.00139177 Jy ! Component: 150 - total flux cleaned = -0.00139028 Jy ! Component: 200 - total flux cleaned = -0.00147718 Jy ! Total flux subtracted in 200 components = -0.00147718 Jy ! Clean residual min=-0.006048 max=0.006070 Jy/beam ! Clean residual mean=-0.000056 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.264595 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.264595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063840Jy sigma=1.534075 ! Fit after self-cal, rms=0.063847Jy sigma=1.533996 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88361e-05 Jy ! Component: 100 - total flux cleaned = 4.07286e-05 Jy ! Component: 150 - total flux cleaned = 1.10026e-05 Jy ! Component: 200 - total flux cleaned = -1.61131e-05 Jy ! Total flux subtracted in 200 components = -1.61131e-05 Jy ! Clean residual min=-0.005934 max=0.005905 Jy/beam ! Clean residual mean=-0.000057 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.264579 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.264579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063820Jy sigma=1.533297 ! Fit after self-cal, rms=0.063818Jy sigma=1.533250 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063818Jy sigma=1.533250 ! Fit after self-cal, rms=0.063135Jy sigma=1.508575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.414 mas, bpa=-9.981 degrees ! Estimated noise=0.484235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.35136e-05 Jy ! Component: 100 - total flux cleaned = 9.742e-05 Jy ! Component: 150 - total flux cleaned = 0.000139258 Jy ! Component: 200 - total flux cleaned = 0.000172252 Jy ! Total flux subtracted in 200 components = 0.000172252 Jy ! Clean residual min=-0.003522 max=0.004953 Jy/beam ! Clean residual mean=-0.000046 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.264751 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.264751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063035Jy sigma=1.506093 ! Fit after self-cal, rms=0.063034Jy sigma=1.505960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468862 Jy ! Component: 100 - total flux cleaned = 0.00692558 Jy ! Component: 150 - total flux cleaned = 0.0084429 Jy ! Component: 200 - total flux cleaned = 0.00933151 Jy ! Total flux subtracted in 200 components = 0.00933151 Jy ! Clean residual min=-0.002712 max=0.003427 Jy/beam ! Clean residual mean=-0.000024 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.274083 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.274083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062700Jy sigma=1.496577 ! Fit after self-cal, rms=0.062663Jy sigma=1.496003 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062663Jy sigma=1.496003 ! Fit after self-cal, rms=0.061298Jy sigma=1.499204 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.664 mas, bmaj=16.69 mas, bpa=-13.2 degrees ! Estimated noise=0.653384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125587 Jy ! Component: 100 - total flux cleaned = 0.00127061 Jy ! Component: 150 - total flux cleaned = 0.00124125 Jy ! Component: 200 - total flux cleaned = 0.00129164 Jy ! Total flux subtracted in 200 components = 0.00129164 Jy ! Clean residual min=-0.003017 max=0.003069 Jy/beam ! Clean residual mean=-0.000018 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.275374 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.275374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061265Jy sigma=1.498052 ! Fit after self-cal, rms=0.061263Jy sigma=1.497896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270299 Jy ! Component: 100 - total flux cleaned = 0.000170867 Jy ! Component: 150 - total flux cleaned = 0.00014811 Jy ! Component: 200 - total flux cleaned = 0.000126609 Jy ! Total flux subtracted in 200 components = 0.000126609 Jy ! Clean residual min=-0.002836 max=0.002852 Jy/beam ! Clean residual mean=-0.000018 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.275501 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.275501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061242Jy sigma=1.497274 ! Fit after self-cal, rms=0.061239Jy sigma=1.497249 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.421 at -10.18 degrees (North through East) ! Clean map min=-0.002657 max=0.21073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=7.423 mas, bpa=-8.824 degrees ! Estimated noise=0.689166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152451 Jy ! Component: 100 - total flux cleaned = 0.19995 Jy ! Component: 150 - total flux cleaned = 0.224496 Jy ! Component: 200 - total flux cleaned = 0.238828 Jy ! Total flux subtracted in 200 components = 0.238828 Jy ! Clean residual min=-0.008176 max=0.008682 Jy/beam ! Clean residual mean=-0.000067 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 0.238828 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.238828 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116831 Jy ! Component: 100 - total flux cleaned = 0.0181953 Jy ! Component: 150 - total flux cleaned = 0.0229027 Jy ! Component: 200 - total flux cleaned = 0.0263587 Jy ! Total flux subtracted in 200 components = 0.0263587 Jy ! Clean residual min=-0.003304 max=0.003400 Jy/beam ! Clean residual mean=-0.000046 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.265187 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.265187 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.664 mas, bmaj=16.69 mas, bpa=-13.2 degrees ! Estimated noise=0.653384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399416 Jy ! Component: 100 - total flux cleaned = 0.00632888 Jy ! Component: 150 - total flux cleaned = 0.00789411 Jy ! Component: 200 - total flux cleaned = 0.00900998 Jy ! Total flux subtracted in 200 components = 0.00900998 Jy ! Clean residual min=-0.003042 max=0.003001 Jy/beam ! Clean residual mean=-0.000030 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.274197 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669521 Jy ! Component: 100 - total flux cleaned = 0.000809771 Jy ! Component: 150 - total flux cleaned = 0.000888369 Jy ! Component: 200 - total flux cleaned = 0.000936292 Jy ! Total flux subtracted in 200 components = 0.000936292 Jy ! Clean residual min=-0.002849 max=0.002938 Jy/beam ! Clean residual mean=-0.000024 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.275133 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 94 components and 0.275133 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899912 Jy ! Component: 100 - total flux cleaned = 0.00112805 Jy ! Component: 150 - total flux cleaned = 0.00126585 Jy ! Component: 200 - total flux cleaned = 0.00134819 Jy ! Total flux subtracted in 200 components = 0.00134819 Jy ! Clean residual min=-0.002600 max=0.003122 Jy/beam ! Clean residual mean=-0.000007 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.276481 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.276481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061177Jy sigma=1.496424 ! Fit after self-cal, rms=0.061170Jy sigma=1.496169 wmodel /scr/pima/bg219a_uvs/J1105+0202_S_map.mod ! Writing 114 model components to file: /scr/pima/bg219a_uvs/J1105+0202_S_map.mod wobs /scr/pima/bg219a_uvs/J1105+0202_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J1105+0202_S_uvs.fits wwins /scr/pima/bg219a_uvs/J1105+0202_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J1105+0202_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880513 Jy ! Component: 100 - total flux cleaned = 0.00115584 Jy ! Component: 150 - total flux cleaned = 0.00119751 Jy ! Component: 200 - total flux cleaned = 0.00115623 Jy ! Component: 250 - total flux cleaned = 0.00122866 Jy ! Component: 300 - total flux cleaned = 0.00136922 Jy ! Component: 350 - total flux cleaned = 0.00133421 Jy ! Component: 400 - total flux cleaned = 0.00126871 Jy ! Component: 450 - total flux cleaned = 0.00114175 Jy ! Component: 500 - total flux cleaned = 0.00105025 Jy ! Component: 550 - total flux cleaned = 0.000991038 Jy ! Component: 600 - total flux cleaned = 0.000875587 Jy ! Component: 650 - total flux cleaned = 0.00079159 Jy ! Component: 700 - total flux cleaned = 0.000737362 Jy ! Component: 750 - total flux cleaned = 0.000764212 Jy ! Component: 800 - total flux cleaned = 0.0007389 Jy ! Component: 850 - total flux cleaned = 0.000714635 Jy ! Component: 900 - total flux cleaned = 0.000714753 Jy ! Component: 950 - total flux cleaned = 0.000667214 Jy ! Component: 1000 - total flux cleaned = 0.000666676 Jy ! Component: 1050 - total flux cleaned = 0.000620664 Jy ! Component: 1100 - total flux cleaned = 0.000531676 Jy ! Component: 1150 - total flux cleaned = 0.000488225 Jy ! Component: 1200 - total flux cleaned = 0.00044517 Jy ! Component: 1250 - total flux cleaned = 0.000402792 Jy ! Component: 1300 - total flux cleaned = 0.000298416 Jy ! Component: 1350 - total flux cleaned = 0.000175603 Jy ! Component: 1400 - total flux cleaned = 9.51262e-05 Jy ! Component: 1450 - total flux cleaned = 1.57933e-05 Jy ! Component: 1500 - total flux cleaned = -6.25856e-05 Jy ! Component: 1550 - total flux cleaned = -0.000159095 Jy ! Component: 1600 - total flux cleaned = -0.000235102 Jy ! Component: 1650 - total flux cleaned = -0.000235121 Jy ! Component: 1700 - total flux cleaned = -0.000272643 Jy ! Component: 1750 - total flux cleaned = -0.000346138 Jy ! Component: 1800 - total flux cleaned = -0.000436341 Jy ! Component: 1850 - total flux cleaned = -0.000436421 Jy ! Component: 1900 - total flux cleaned = -0.000524568 Jy ! Component: 1950 - total flux cleaned = -0.000628964 Jy ! Component: 2000 - total flux cleaned = -0.000663274 Jy ! Component: 2050 - total flux cleaned = -0.000680273 Jy ! Component: 2100 - total flux cleaned = -0.000697165 Jy ! Component: 2150 - total flux cleaned = -0.000764032 Jy ! Component: 2200 - total flux cleaned = -0.00083008 Jy ! Component: 2250 - total flux cleaned = -0.000830145 Jy ! Component: 2300 - total flux cleaned = -0.000895378 Jy ! Component: 2350 - total flux cleaned = -0.000943769 Jy ! Component: 2400 - total flux cleaned = -0.0010077 Jy ! Component: 2450 - total flux cleaned = -0.00107093 Jy ! Component: 2500 - total flux cleaned = -0.00114952 Jy ! Component: 2550 - total flux cleaned = -0.00122759 Jy ! Component: 2600 - total flux cleaned = -0.00130501 Jy ! Component: 2650 - total flux cleaned = -0.00139722 Jy ! Component: 2700 - total flux cleaned = -0.00147348 Jy ! Component: 2750 - total flux cleaned = -0.00156407 Jy ! Component: 2800 - total flux cleaned = -0.00165393 Jy ! Component: 2850 - total flux cleaned = -0.00171362 Jy ! Component: 2900 - total flux cleaned = -0.00184699 Jy ! Component: 2950 - total flux cleaned = -0.00193524 Jy ! Component: 3000 - total flux cleaned = -0.00203746 Jy ! Component: 3050 - total flux cleaned = -0.0020955 Jy ! Component: 3100 - total flux cleaned = -0.00222555 Jy ! Component: 3150 - total flux cleaned = -0.00231183 Jy ! Component: 3200 - total flux cleaned = -0.00242634 Jy ! Component: 3250 - total flux cleaned = -0.00249738 Jy ! Component: 3300 - total flux cleaned = -0.00256831 Jy ! Component: 3350 - total flux cleaned = -0.00268097 Jy ! Component: 3400 - total flux cleaned = -0.00279321 Jy ! Component: 3450 - total flux cleaned = -0.00289088 Jy ! Component: 3500 - total flux cleaned = -0.00298805 Jy ! Component: 3550 - total flux cleaned = -0.00308484 Jy ! Component: 3600 - total flux cleaned = -0.00320864 Jy ! Component: 3650 - total flux cleaned = -0.00329079 Jy ! Component: 3700 - total flux cleaned = -0.00341349 Jy ! Component: 3750 - total flux cleaned = -0.00352212 Jy ! Component: 3800 - total flux cleaned = -0.00361669 Jy ! Component: 3850 - total flux cleaned = -0.00372438 Jy ! Component: 3900 - total flux cleaned = -0.00381827 Jy ! Component: 3950 - total flux cleaned = -0.00391176 Jy ! Component: 4000 - total flux cleaned = -0.00399165 Jy ! Component: 4050 - total flux cleaned = -0.00408458 Jy ! Total flux subtracted in 4096 components = -0.00413746 Jy ! Clean residual min=-0.000755 max=0.000843 Jy/beam ! Clean residual mean=-0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.272344 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 356 components and 0.272344 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J1105+0202_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.421 at -10.18 degrees (North through East) ! Clean map min=-0.0020446 max=0.20759 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1105+0202_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207593 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.348789 0.348789 0.697578 1.39516 2.79031 5.58062 11.1612 22.3225 44.645 89.2899 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.207 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 860.119 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1105+0202_S_uvs.log closed on Wed Apr 6 22:52:13 2016