! Started logfile: /scr/pima/bg219a_uvs/J1105+0202_S_dfm.log on Fri May 20 00:03:41 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1105+0202_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1105+0202_S_uva.fits ! AN table 1: 29 integrations on 15 of 15 possible baselines. ! AN table 2: 28 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.989474 visibilities/baseline/integration-bin. ! Found source: J1105+0202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3384 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1105+0202_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.029310Jy sigma=24.852514 ! Fit after self-cal, rms=0.776291Jy sigma=18.735802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=7.393 mas, bpa=-7.08 degrees ! Estimated noise=0.753482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166627 Jy ! Component: 100 - total flux cleaned = 0.213578 Jy ! Total flux subtracted in 100 components = 0.213578 Jy ! Clean residual min=-0.016530 max=0.021518 Jy/beam ! Clean residual mean=-0.000164 rms=0.004929 Jy/beam ! Combined flux in latest and established models = 0.213578 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.213578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078122Jy sigma=1.844927 ! Fit after self-cal, rms=0.077787Jy sigma=1.838316 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.392 mas, bpa=-8.387 degrees ! Estimated noise=0.514702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279604 Jy ! Component: 100 - total flux cleaned = 0.0406967 Jy ! Component: 150 - total flux cleaned = 0.047478 Jy ! Component: 200 - total flux cleaned = 0.0511837 Jy ! Total flux subtracted in 200 components = 0.0511837 Jy ! Clean residual min=-0.008407 max=0.009382 Jy/beam ! Clean residual mean=-0.000118 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.264762 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.264762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067795Jy sigma=1.611939 ! Fit after self-cal, rms=0.067823Jy sigma=1.611091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.392 at -8.387 degrees (North through East) ! Clean map min=-0.0079285 max=0.22402 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 LA 0.99 MK 0.90 NL 1.00 ! OV 1.02 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 LA 0.98 MK 0.86 NL 1.00 ! OV 1.01 PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 LA 0.99 MK 0.87 NL 0.97 ! OV 1.02 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 0.96 MK 0.86 NL 1.01 ! OV 1.00 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.067823Jy sigma=1.611091 ! Fit after self-cal, rms=0.065289Jy sigma=1.572818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.417 mas, bpa=-9.253 degrees ! Estimated noise=0.498151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485955 Jy ! Component: 100 - total flux cleaned = 0.00110312 Jy ! Component: 150 - total flux cleaned = 0.00136863 Jy ! Component: 200 - total flux cleaned = 0.00131035 Jy ! Total flux subtracted in 200 components = 0.00131035 Jy ! Clean residual min=-0.006628 max=0.007581 Jy/beam ! Clean residual mean=-0.000044 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.266072 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.266072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064625Jy sigma=1.556890 ! Fit after self-cal, rms=0.064634Jy sigma=1.556775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064634Jy sigma=1.556775 ! Fit after self-cal, rms=0.064071Jy sigma=1.540575 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=8.409 mas, bpa=-9.584 degrees ! Estimated noise=0.489609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150419 Jy ! Component: 100 - total flux cleaned = -0.00139177 Jy ! Component: 150 - total flux cleaned = -0.00139028 Jy ! Component: 200 - total flux cleaned = -0.00147718 Jy ! Total flux subtracted in 200 components = -0.00147718 Jy ! Clean residual min=-0.006048 max=0.006070 Jy/beam ! Clean residual mean=-0.000056 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.264595 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.264595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063840Jy sigma=1.534075 ! Fit after self-cal, rms=0.063847Jy sigma=1.533996 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88361e-05 Jy ! Component: 100 - total flux cleaned = 4.07286e-05 Jy ! Component: 150 - total flux cleaned = 1.10026e-05 Jy ! Component: 200 - total flux cleaned = -1.61131e-05 Jy ! Total flux subtracted in 200 components = -1.61131e-05 Jy ! Clean residual min=-0.005934 max=0.005905 Jy/beam ! Clean residual mean=-0.000057 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.264579 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.264579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063820Jy sigma=1.533297 ! Fit after self-cal, rms=0.063818Jy sigma=1.533250 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063818Jy sigma=1.533250 ! Fit after self-cal, rms=0.063135Jy sigma=1.508575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.414 mas, bpa=-9.981 degrees ! Estimated noise=0.484235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.35136e-05 Jy ! Component: 100 - total flux cleaned = 9.742e-05 Jy ! Component: 150 - total flux cleaned = 0.000139258 Jy ! Component: 200 - total flux cleaned = 0.000172252 Jy ! Total flux subtracted in 200 components = 0.000172252 Jy ! Clean residual min=-0.003522 max=0.004953 Jy/beam ! Clean residual mean=-0.000046 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.264751 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.264751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063035Jy sigma=1.506093 ! Fit after self-cal, rms=0.063034Jy sigma=1.505960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468862 Jy ! Component: 100 - total flux cleaned = 0.00692558 Jy ! Component: 150 - total flux cleaned = 0.0084429 Jy ! Component: 200 - total flux cleaned = 0.00933151 Jy ! Total flux subtracted in 200 components = 0.00933151 Jy ! Clean residual min=-0.002712 max=0.003427 Jy/beam ! Clean residual mean=-0.000024 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.274083 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.274083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062700Jy sigma=1.496577 ! Fit after self-cal, rms=0.062663Jy sigma=1.496003 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062663Jy sigma=1.496003 ! Fit after self-cal, rms=0.061298Jy sigma=1.499204 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.664 mas, bmaj=16.69 mas, bpa=-13.2 degrees ! Estimated noise=0.653384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125587 Jy ! Component: 100 - total flux cleaned = 0.00127061 Jy ! Component: 150 - total flux cleaned = 0.00124125 Jy ! Component: 200 - total flux cleaned = 0.00129164 Jy ! Total flux subtracted in 200 components = 0.00129164 Jy ! Clean residual min=-0.003017 max=0.003069 Jy/beam ! Clean residual mean=-0.000018 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.275374 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.275374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061265Jy sigma=1.498052 ! Fit after self-cal, rms=0.061263Jy sigma=1.497896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270299 Jy ! Component: 100 - total flux cleaned = 0.000170867 Jy ! Component: 150 - total flux cleaned = 0.00014811 Jy ! Component: 200 - total flux cleaned = 0.000126609 Jy ! Total flux subtracted in 200 components = 0.000126609 Jy ! Clean residual min=-0.002836 max=0.002852 Jy/beam ! Clean residual mean=-0.000018 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.275501 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 0.275501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061242Jy sigma=1.497274 ! Fit after self-cal, rms=0.061239Jy sigma=1.497249 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.421 at -10.18 degrees (North through East) ! Clean map min=-0.002657 max=0.21073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=7.423 mas, bpa=-8.824 degrees ! Estimated noise=0.689166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152451 Jy ! Component: 100 - total flux cleaned = 0.19995 Jy ! Component: 150 - total flux cleaned = 0.224496 Jy ! Component: 200 - total flux cleaned = 0.238828 Jy ! Total flux subtracted in 200 components = 0.238828 Jy ! Clean residual min=-0.008176 max=0.008682 Jy/beam ! Clean residual mean=-0.000067 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 0.238828 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.238828 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116831 Jy ! Component: 100 - total flux cleaned = 0.0181953 Jy ! Component: 150 - total flux cleaned = 0.0229027 Jy ! Component: 200 - total flux cleaned = 0.0263587 Jy ! Total flux subtracted in 200 components = 0.0263587 Jy ! Clean residual min=-0.003304 max=0.003400 Jy/beam ! Clean residual mean=-0.000046 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.265187 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.265187 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.664 mas, bmaj=16.69 mas, bpa=-13.2 degrees ! Estimated noise=0.653384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399416 Jy ! Component: 100 - total flux cleaned = 0.00632888 Jy ! Component: 150 - total flux cleaned = 0.00789411 Jy ! Component: 200 - total flux cleaned = 0.00900998 Jy ! Total flux subtracted in 200 components = 0.00900998 Jy ! Clean residual min=-0.003042 max=0.003001 Jy/beam ! Clean residual mean=-0.000030 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.274197 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669521 Jy ! Component: 100 - total flux cleaned = 0.000809771 Jy ! Component: 150 - total flux cleaned = 0.000888369 Jy ! Component: 200 - total flux cleaned = 0.000936292 Jy ! Total flux subtracted in 200 components = 0.000936292 Jy ! Clean residual min=-0.002849 max=0.002938 Jy/beam ! Clean residual mean=-0.000024 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.275133 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 94 components and 0.275133 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.421 mas, bpa=-10.18 degrees ! Estimated noise=0.476972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899912 Jy ! Component: 100 - total flux cleaned = 0.00112805 Jy ! Component: 150 - total flux cleaned = 0.00126585 Jy ! Component: 200 - total flux cleaned = 0.00134819 Jy ! Total flux subtracted in 200 components = 0.00134819 Jy ! Clean residual min=-0.002600 max=0.003122 Jy/beam ! Clean residual mean=-0.000007 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.276481 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.276481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061177Jy sigma=1.496424 ! Fit after self-cal, rms=0.061170Jy sigma=1.496169 wmodel /J1105+0202_S_map.mod ! wmodel: Unable to open new model file: /J1105+0202_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1105+0202_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.421 at -10.18 degrees (North through East) ! Clean map min=-0.0025628 max=0.20794 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1105+0202_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.207945 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000748523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07989 1.07989 2.15977 4.31955 8.63909 17.2782 34.5564 69.1127 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.207 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 277.806 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1105+0202_S_dfm.log closed on Fri May 20 00:03:43 2016