! Started logfile: /scr/pima/bg219a_uvs/J1102-4404_S_dfm.log on Fri May 20 00:03:34 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1102-4404_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1102-4404_S_uva.fits ! AN table 1: 47 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.702128 visibilities/baseline/integration-bin. ! Found source: J1102-4404 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2772 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1102-4404_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.027110Jy sigma=16.249024 ! Fit after self-cal, rms=0.660784Jy sigma=10.455256 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.173 mas, bmaj=7.872 mas, bpa=-6.914 degrees ! Estimated noise=1.51613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280467 Jy ! Component: 100 - total flux cleaned = 0.341632 Jy ! Total flux subtracted in 100 components = 0.341632 Jy ! Clean residual min=-0.013204 max=0.029489 Jy/beam ! Clean residual mean=-0.000066 rms=0.004391 Jy/beam ! Combined flux in latest and established models = 0.341632 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.341632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095781Jy sigma=1.366584 ! Fit after self-cal, rms=0.095773Jy sigma=1.366543 ! Inverting map ! Added new window around map position (-5, -16). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211089 Jy ! Component: 100 - total flux cleaned = 0.0215641 Jy ! Total flux subtracted in 100 components = 0.0215641 Jy ! Clean residual min=-0.011041 max=0.018982 Jy/beam ! Clean residual mean=-0.000049 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.363196 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.363196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091549Jy sigma=1.311615 ! Fit after self-cal, rms=0.090504Jy sigma=1.293893 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=9.547 mas, bpa=-5.645 degrees ! Estimated noise=0.871827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220573 Jy ! Component: 100 - total flux cleaned = 0.00195919 Jy ! Component: 150 - total flux cleaned = 0.00144729 Jy ! Component: 200 - total flux cleaned = 0.00102691 Jy ! Total flux subtracted in 200 components = 0.00102691 Jy ! Clean residual min=-0.007232 max=0.011254 Jy/beam ! Clean residual mean=-0.000158 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 0.364223 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.364223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089110Jy sigma=1.285203 ! Fit after self-cal, rms=0.089025Jy sigma=1.282996 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.815 x 9.547 at -5.645 degrees (North through East) ! Clean map min=-0.0068408 max=0.33222 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 LA 1.00 MK 1.01 NL 1.17 ! OV 0.99 PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* LA 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.089025Jy sigma=1.282996 ! Fit after self-cal, rms=0.089552Jy sigma=1.276808 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=9.536 mas, bpa=-5.544 degrees ! Estimated noise=0.876183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227618 Jy ! Component: 100 - total flux cleaned = 0.00237955 Jy ! Component: 150 - total flux cleaned = 0.00247039 Jy ! Component: 200 - total flux cleaned = 0.00255234 Jy ! Total flux subtracted in 200 components = 0.00255234 Jy ! Clean residual min=-0.007248 max=0.009052 Jy/beam ! Clean residual mean=-0.000161 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 0.366775 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.366775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089247Jy sigma=1.274057 ! Fit after self-cal, rms=0.089262Jy sigma=1.273503 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089262Jy sigma=1.273503 ! Fit after self-cal, rms=0.089685Jy sigma=1.272208 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=9.507 mas, bpa=-5.641 degrees ! Estimated noise=0.878304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401804 Jy ! Component: 100 - total flux cleaned = 0.00462793 Jy ! Component: 150 - total flux cleaned = 0.00505145 Jy ! Component: 200 - total flux cleaned = 0.0054151 Jy ! Total flux subtracted in 200 components = 0.0054151 Jy ! Clean residual min=-0.006774 max=0.008898 Jy/beam ! Clean residual mean=-0.000133 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.37219 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.37219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089402Jy sigma=1.268935 ! Fit after self-cal, rms=0.089423Jy sigma=1.268541 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608489 Jy ! Component: 100 - total flux cleaned = 0.000684184 Jy ! Component: 150 - total flux cleaned = 0.000809193 Jy ! Component: 200 - total flux cleaned = 0.000925956 Jy ! Total flux subtracted in 200 components = 0.000925956 Jy ! Clean residual min=-0.006841 max=0.008708 Jy/beam ! Clean residual mean=-0.000132 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.373116 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.373116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089276Jy sigma=1.267565 ! Fit after self-cal, rms=0.089284Jy sigma=1.267376 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089284Jy sigma=1.267376 ! Fit after self-cal, rms=0.089245Jy sigma=1.266332 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=9.491 mas, bpa=-5.668 degrees ! Estimated noise=0.88058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280826 Jy ! Component: 100 - total flux cleaned = 0.00330808 Jy ! Component: 150 - total flux cleaned = 0.0036095 Jy ! Component: 200 - total flux cleaned = 0.00382603 Jy ! Total flux subtracted in 200 components = 0.00382603 Jy ! Clean residual min=-0.006708 max=0.008515 Jy/beam ! Clean residual mean=-0.000110 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.376942 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.376942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089114Jy sigma=1.264576 ! Fit after self-cal, rms=0.089121Jy sigma=1.264389 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00045467 Jy ! Component: 100 - total flux cleaned = 0.000511509 Jy ! Component: 150 - total flux cleaned = 0.000608693 Jy ! Component: 200 - total flux cleaned = 0.000609245 Jy ! Total flux subtracted in 200 components = 0.000609245 Jy ! Clean residual min=-0.006705 max=0.008352 Jy/beam ! Clean residual mean=-0.000109 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.377551 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.377551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089033Jy sigma=1.263827 ! Fit after self-cal, rms=0.089041Jy sigma=1.263722 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089041Jy sigma=1.263722 ! Fit after self-cal, rms=0.089059Jy sigma=1.263279 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.275 mas, bmaj=27.63 mas, bpa=3.711 degrees ! Estimated noise=1.1972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312041 Jy ! Component: 100 - total flux cleaned = 0.00386829 Jy ! Component: 150 - total flux cleaned = 0.00394552 Jy ! Component: 200 - total flux cleaned = 0.00405749 Jy ! Total flux subtracted in 200 components = 0.00405749 Jy ! Clean residual min=-0.007661 max=0.010638 Jy/beam ! Clean residual mean=-0.000211 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 0.381609 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.381609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089092Jy sigma=1.262704 ! Fit after self-cal, rms=0.089080Jy sigma=1.262593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169762 Jy ! Component: 100 - total flux cleaned = 0.000214255 Jy ! Component: 150 - total flux cleaned = 0.000294188 Jy ! Component: 200 - total flux cleaned = 0.00033115 Jy ! Total flux subtracted in 200 components = 0.00033115 Jy ! Clean residual min=-0.007660 max=0.010570 Jy/beam ! Clean residual mean=-0.000210 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.38194 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.38194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089107Jy sigma=1.263051 ! Fit after self-cal, rms=0.089096Jy sigma=1.262941 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=9.481 mas, bpa=-5.679 degrees ! Estimated noise=0.882353 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.791 x 9.481 at -5.679 degrees (North through East) ! Clean map min=-0.0064187 max=0.32453 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=7.841 mas, bpa=-6.884 degrees ! Estimated noise=1.52305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281137 Jy ! Component: 100 - total flux cleaned = 0.350478 Jy ! Component: 150 - total flux cleaned = 0.370808 Jy ! Component: 200 - total flux cleaned = 0.375752 Jy ! Total flux subtracted in 200 components = 0.375752 Jy ! Clean residual min=-0.008620 max=0.010648 Jy/beam ! Clean residual mean=-0.000032 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 0.375752 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.375752 Jy ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=9.481 mas, bpa=-5.679 degrees ! Estimated noise=0.882353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648306 Jy ! Component: 100 - total flux cleaned = 0.00709609 Jy ! Component: 150 - total flux cleaned = 0.0073918 Jy ! Component: 200 - total flux cleaned = 0.00738757 Jy ! Total flux subtracted in 200 components = 0.00738757 Jy ! Clean residual min=-0.006955 max=0.007430 Jy/beam ! Clean residual mean=-0.000093 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.383139 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.383139 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.275 mas, bmaj=27.63 mas, bpa=3.711 degrees ! Estimated noise=1.1972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625309 Jy ! Component: 100 - total flux cleaned = 0.000722236 Jy ! Component: 150 - total flux cleaned = 0.000813977 Jy ! Component: 200 - total flux cleaned = 0.000729432 Jy ! Total flux subtracted in 200 components = 0.000729432 Jy ! Clean residual min=-0.007982 max=0.010387 Jy/beam ! Clean residual mean=-0.000191 rms=0.002809 Jy/beam ! Combined flux in latest and established models = 0.383869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24785e-06 Jy ! Component: 100 - total flux cleaned = -6.84988e-07 Jy ! Component: 150 - total flux cleaned = -3.23232e-06 Jy ! Component: 200 - total flux cleaned = -6.49265e-05 Jy ! Total flux subtracted in 200 components = -6.49265e-05 Jy ! Clean residual min=-0.007688 max=0.010579 Jy/beam ! Clean residual mean=-0.000182 rms=0.002759 Jy/beam ! Combined flux in latest and established models = 0.383804 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.383804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=9.481 mas, bpa=-5.679 degrees ! Estimated noise=0.882353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411467 Jy ! Component: 100 - total flux cleaned = 0.000872355 Jy ! Component: 150 - total flux cleaned = 0.000966649 Jy ! Component: 200 - total flux cleaned = 0.000890021 Jy ! Total flux subtracted in 200 components = 0.000890021 Jy ! Clean residual min=-0.006938 max=0.007516 Jy/beam ! Clean residual mean=-0.000079 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.384694 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.384694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088204Jy sigma=1.254979 ! Fit after self-cal, rms=0.088133Jy sigma=1.253669 wmodel /J1102-4404_S_map.mod ! wmodel: Unable to open new model file: /J1102-4404_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1102-4404_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.791 x 9.481 at -5.679 degrees (North through East) ! Clean map min=-0.010023 max=0.32118 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1102-4404_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.321185 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00175572 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.63992 1.63992 3.27983 6.55967 13.1193 26.2387 52.4774 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0052 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.321 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 182.936 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1102-4404_S_dfm.log closed on Fri May 20 00:03:36 2016