! Started logfile: /scr/pima/bg219a_uvs/J1101+6241_S_dfm.log on Fri May 20 00:03:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1101+6241_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1101+6241_S_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1101+6241
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1101+6241_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019232Jy  sigma=25.641068
! Fit after  self-cal, rms=0.848765Jy  sigma=21.319936
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.621 mas, bmaj=5.275 mas, bpa=71.79 degrees
! Estimated noise=1.11246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114642 Jy
! Component: 100  -  total flux cleaned = 0.14801 Jy
! Total flux subtracted in 100 components = 0.14801 Jy
! Clean residual min=-0.008028 max=0.012300 Jy/beam
! Clean residual mean=-0.000087 rms=0.002516 Jy/beam
! Combined flux in latest and established models = 0.14801 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.14801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053611Jy  sigma=1.298203
! Fit after  self-cal, rms=0.053563Jy  sigma=1.296835
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.099 mas, bmaj=6.295 mas, bpa=68.05 degrees
! Estimated noise=0.821433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152282 Jy
! Component: 100  -  total flux cleaned = 0.0221224 Jy
! Component: 150  -  total flux cleaned = 0.0254697 Jy
! Component: 200  -  total flux cleaned = 0.0266907 Jy
! Total flux subtracted in 200 components = 0.0266907 Jy
! Clean residual min=-0.004762 max=0.004608 Jy/beam
! Clean residual mean=-0.000035 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 0.174701 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.174701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049868Jy  sigma=1.185487
! Fit after  self-cal, rms=0.049901Jy  sigma=1.184761
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.099 x 6.295 at 68.05 degrees (North through East)
! Clean map  min=-0.0045825  max=0.15116 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.98     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.96     OV        1.04     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.06     NL        0.98     OV        0.99     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.049901Jy  sigma=1.184761
! Fit after  self-cal, rms=0.049612Jy  sigma=1.175015
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=6.329 mas, bpa=67.82 degrees
! Estimated noise=0.817843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123435 Jy
! Component: 100  -  total flux cleaned = -0.00123542 Jy
! Component: 150  -  total flux cleaned = -0.00115245 Jy
! Component: 200  -  total flux cleaned = -0.00111441 Jy
! Total flux subtracted in 200 components = -0.00111441 Jy
! Clean residual min=-0.004337 max=0.003935 Jy/beam
! Clean residual mean=-0.000017 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 0.173587 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.173587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049528Jy  sigma=1.172534
! Fit after  self-cal, rms=0.049545Jy  sigma=1.172335
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049545Jy  sigma=1.172335
! Fit after  self-cal, rms=0.049316Jy  sigma=1.160275
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.123 mas, bmaj=6.306 mas, bpa=68 degrees
! Estimated noise=0.816927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.07228e-05 Jy
! Component: 100  -  total flux cleaned = -4.25899e-05 Jy
! Component: 150  -  total flux cleaned = -8.304e-07 Jy
! Component: 200  -  total flux cleaned = 2.4768e-05 Jy
! Total flux subtracted in 200 components = 2.4768e-05 Jy
! Clean residual min=-0.003516 max=0.003513 Jy/beam
! Clean residual mean=0.000003 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.173611 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.173611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049305Jy  sigma=1.160070
! Fit after  self-cal, rms=0.049327Jy  sigma=1.159958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.43425e-05 Jy
! Component: 100  -  total flux cleaned = 5.1752e-05 Jy
! Component: 150  -  total flux cleaned = 6.39098e-05 Jy
! Component: 200  -  total flux cleaned = 7.52767e-05 Jy
! Total flux subtracted in 200 components = 7.52767e-05 Jy
! Clean residual min=-0.003495 max=0.003493 Jy/beam
! Clean residual mean=0.000004 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.173687 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 0.173687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049320Jy  sigma=1.159817
! Fit after  self-cal, rms=0.049320Jy  sigma=1.159782
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049320Jy  sigma=1.159782
! Fit after  self-cal, rms=0.049280Jy  sigma=1.159761
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=6.308 mas, bpa=67.9 degrees
! Estimated noise=0.816906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.38326e-05 Jy
! Component: 100  -  total flux cleaned = 8.83319e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123252 Jy
! Component: 200  -  total flux cleaned = 0.000153691 Jy
! Total flux subtracted in 200 components = 0.000153691 Jy
! Clean residual min=-0.003496 max=0.003458 Jy/beam
! Clean residual mean=0.000004 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.17384 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.17384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049273Jy  sigma=1.159635
! Fit after  self-cal, rms=0.049273Jy  sigma=1.159603
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.80353e-06 Jy
! Component: 100  -  total flux cleaned = -4.19883e-06 Jy
! Component: 150  -  total flux cleaned = 6.36807e-06 Jy
! Component: 200  -  total flux cleaned = 1.59525e-05 Jy
! Total flux subtracted in 200 components = 1.59525e-05 Jy
! Clean residual min=-0.003484 max=0.003432 Jy/beam
! Clean residual mean=0.000004 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.173856 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.173856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049267Jy  sigma=1.159509
! Fit after  self-cal, rms=0.049268Jy  sigma=1.159486
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049268Jy  sigma=1.159486
! Fit after  self-cal, rms=0.049249Jy  sigma=1.159470
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.188 mas, bmaj=14.51 mas, bpa=59.15 degrees
! Estimated noise=1.04159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183136 Jy
! Component: 100  -  total flux cleaned = 0.000146679 Jy
! Component: 150  -  total flux cleaned = 0.000117828 Jy
! Component: 200  -  total flux cleaned = 8.51569e-05 Jy
! Total flux subtracted in 200 components = 8.51569e-05 Jy
! Clean residual min=-0.003361 max=0.003616 Jy/beam
! Clean residual mean=0.000010 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.173941 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.173941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049255Jy  sigma=1.159586
! Fit after  self-cal, rms=0.049250Jy  sigma=1.159504
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.06171e-06 Jy
! Component: 100  -  total flux cleaned = -3.02283e-05 Jy
! Component: 150  -  total flux cleaned = -5.35511e-05 Jy
! Component: 200  -  total flux cleaned = -7.98955e-05 Jy
! Total flux subtracted in 200 components = -7.98955e-05 Jy
! Clean residual min=-0.003366 max=0.003597 Jy/beam
! Clean residual mean=0.000009 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.173862 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.173862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049260Jy  sigma=1.159722
! Fit after  self-cal, rms=0.049256Jy  sigma=1.159657
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=6.312 mas, bpa=67.82 degrees
! Estimated noise=0.817069 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.12 x 6.312 at 67.82 degrees (North through East)
! Clean map  min=-0.003285  max=0.15054 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.641 mas, bmaj=5.292 mas, bpa=71.58 degrees
! Estimated noise=1.10708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113808 Jy
! Component: 100  -  total flux cleaned = 0.146662 Jy
! Component: 150  -  total flux cleaned = 0.159014 Jy
! Component: 200  -  total flux cleaned = 0.165501 Jy
! Total flux subtracted in 200 components = 0.165501 Jy
! Clean residual min=-0.005145 max=0.004409 Jy/beam
! Clean residual mean=-0.000023 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.165501 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.165501 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=6.312 mas, bpa=67.82 degrees
! Estimated noise=0.817069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00476134 Jy
! Component: 100  -  total flux cleaned = 0.00710274 Jy
! Component: 150  -  total flux cleaned = 0.0083382 Jy
! Component: 200  -  total flux cleaned = 0.00889301 Jy
! Total flux subtracted in 200 components = 0.00889301 Jy
! Clean residual min=-0.003537 max=0.003313 Jy/beam
! Clean residual mean=0.000006 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.174394 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.174394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.188 mas, bmaj=14.51 mas, bpa=59.15 degrees
! Estimated noise=1.04159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193805 Jy
! Component: 100  -  total flux cleaned = 0.000105074 Jy
! Component: 150  -  total flux cleaned = 5.81731e-05 Jy
! Component: 200  -  total flux cleaned = 1.66758e-05 Jy
! Total flux subtracted in 200 components = 1.66758e-05 Jy
! Clean residual min=-0.003515 max=0.003737 Jy/beam
! Clean residual mean=0.000016 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.174411 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.62022e-05 Jy
! Component: 100  -  total flux cleaned = -8.98136e-05 Jy
! Component: 150  -  total flux cleaned = -0.000105941 Jy
! Component: 200  -  total flux cleaned = -0.000120882 Jy
! Total flux subtracted in 200 components = -0.000120882 Jy
! Clean residual min=-0.003469 max=0.003697 Jy/beam
! Clean residual mean=0.000014 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.17429 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.17429 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=6.312 mas, bpa=67.82 degrees
! Estimated noise=0.817069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113378 Jy
! Component: 100  -  total flux cleaned = -0.000113167 Jy
! Component: 150  -  total flux cleaned = -0.000111702 Jy
! Component: 200  -  total flux cleaned = -7.59727e-05 Jy
! Total flux subtracted in 200 components = -7.59727e-05 Jy
! Clean residual min=-0.003484 max=0.003328 Jy/beam
! Clean residual mean=0.000006 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.174214 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.174214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049246Jy  sigma=1.159542
! Fit after  self-cal, rms=0.049245Jy  sigma=1.159486
wmodel /J1101+6241_S_map.mod
! wmodel: Unable to open new model file: /J1101+6241_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1101+6241_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.12 x 6.312 at 67.82 degrees (North through East)
! Clean map  min=-0.0033079  max=0.15031 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1101+6241_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.15031 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000876891 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.75016 1.75016 3.50033 7.00065 14.0013 28.0026 56.0052
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.15 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  171.412 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1101+6241_S_dfm.log closed on Fri May 20 00:03:22 2016