! Started logfile: /scr/pima/bg219a_uvs/J1058+8114_X_dfm.log on Fri May 20 00:03:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1058+8114_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1058+8114_X_uva.fits
! AN table 1: 18 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J1058+8114
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 2808 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1058+8114_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.069984Jy  sigma=27.296143
! Fit after  self-cal, rms=0.675535Jy  sigma=17.275677
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5788 mas, bmaj=1.404 mas, bpa=66 degrees
! Estimated noise=0.924429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.237294 Jy
! Component: 100  -  total flux cleaned = 0.307741 Jy
! Total flux subtracted in 100 components = 0.307741 Jy
! Clean residual min=-0.026500 max=0.053636 Jy/beam
! Clean residual mean=0.000029 rms=0.007594 Jy/beam
! Combined flux in latest and established models = 0.307741 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.307741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.150374Jy  sigma=3.883611
! Fit after  self-cal, rms=0.149941Jy  sigma=3.870739
! Inverting map 
! Added new window around map position (1, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0500431 Jy
! Component: 100  -  total flux cleaned = 0.0724496 Jy
! Total flux subtracted in 100 components = 0.0724496 Jy
! Clean residual min=-0.021496 max=0.030489 Jy/beam
! Clean residual mean=0.000015 rms=0.004646 Jy/beam
! Combined flux in latest and established models = 0.380191 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.380191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.129521Jy  sigma=3.338109
! Fit after  self-cal, rms=0.128344Jy  sigma=3.304446
! Inverting map 
! Added new window around map position (5.8, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177264 Jy
! Component: 100  -  total flux cleaned = 0.0258821 Jy
! Total flux subtracted in 100 components = 0.0258821 Jy
! Clean residual min=-0.015634 max=0.015318 Jy/beam
! Clean residual mean=0.000011 rms=0.003410 Jy/beam
! Combined flux in latest and established models = 0.406073 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.406073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.123883Jy  sigma=3.181870
! Fit after  self-cal, rms=0.123539Jy  sigma=3.172231
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7501 mas, bmaj=1.705 mas, bpa=67.74 degrees
! Estimated noise=0.567221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170038 Jy
! Component: 100  -  total flux cleaned = 0.0233792 Jy
! Component: 150  -  total flux cleaned = 0.0271024 Jy
! Component: 200  -  total flux cleaned = 0.0290494 Jy
! Total flux subtracted in 200 components = 0.0290494 Jy
! Clean residual min=-0.011330 max=0.009120 Jy/beam
! Clean residual mean=0.000028 rms=0.002222 Jy/beam
! Combined flux in latest and established models = 0.435122 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 28 components and 0.435122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120910Jy  sigma=3.100511
! Fit after  self-cal, rms=0.120896Jy  sigma=3.100125
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7501 x 1.705 at 67.74 degrees (North through East)
! Clean map  min=-0.01464  max=0.31264 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.09     NL        0.99     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.09     NL        0.99     OV        1.02     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.08     NL        0.97     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.06     NL        0.99     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.06     NL        1.01     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.07     NL        0.98     OV        1.01     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.09     NL        0.98     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.03     NL        0.97     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.03     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        0.97     OV        0.98     
!   PT        0.98     SC        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.06     NL        0.97     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        0.96     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.120896Jy  sigma=3.100125
! Fit after  self-cal, rms=0.122457Jy  sigma=3.081273
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7564 mas, bmaj=1.726 mas, bpa=67.15 degrees
! Estimated noise=0.568074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342768 Jy
! Component: 100  -  total flux cleaned = -0.000100948 Jy
! Component: 150  -  total flux cleaned = -0.00022113 Jy
! Component: 200  -  total flux cleaned = -0.00053642 Jy
! Total flux subtracted in 200 components = -0.00053642 Jy
! Clean residual min=-0.009491 max=0.007942 Jy/beam
! Clean residual mean=0.000023 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.434586 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.434586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122181Jy  sigma=3.072130
! Fit after  self-cal, rms=0.122163Jy  sigma=3.071734
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122163Jy  sigma=3.071734
! Fit after  self-cal, rms=0.125630Jy  sigma=3.050183
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.714 mas, bpa=67.63 degrees
! Estimated noise=0.570292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014771 Jy
! Component: 100  -  total flux cleaned = 0.000321825 Jy
! Component: 150  -  total flux cleaned = 0.000543264 Jy
! Component: 200  -  total flux cleaned = 0.000669217 Jy
! Total flux subtracted in 200 components = 0.000669217 Jy
! Clean residual min=-0.006424 max=0.005957 Jy/beam
! Clean residual mean=0.000000 rms=0.001231 Jy/beam
! Combined flux in latest and established models = 0.435255 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.435255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125476Jy  sigma=3.049011
! Fit after  self-cal, rms=0.125473Jy  sigma=3.048869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000316289 Jy
! Component: 100  -  total flux cleaned = 0.000412143 Jy
! Component: 150  -  total flux cleaned = 0.00054629 Jy
! Component: 200  -  total flux cleaned = 0.000667646 Jy
! Total flux subtracted in 200 components = 0.000667646 Jy
! Clean residual min=-0.006230 max=0.005713 Jy/beam
! Clean residual mean=0.000000 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.435923 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.435923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125416Jy  sigma=3.048505
! Fit after  self-cal, rms=0.125415Jy  sigma=3.048471
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125415Jy  sigma=3.048471
! Fit after  self-cal, rms=0.125384Jy  sigma=3.048460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.713 mas, bpa=67.64 degrees
! Estimated noise=0.570101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.7678e-05 Jy
! Component: 100  -  total flux cleaned = 0.000213685 Jy
! Component: 150  -  total flux cleaned = 0.000354633 Jy
! Component: 200  -  total flux cleaned = 0.000484773 Jy
! Total flux subtracted in 200 components = 0.000484773 Jy
! Clean residual min=-0.006081 max=0.005822 Jy/beam
! Clean residual mean=-0.000000 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.436407 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.436407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125356Jy  sigma=3.048153
! Fit after  self-cal, rms=0.125356Jy  sigma=3.048116
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205378 Jy
! Component: 100  -  total flux cleaned = 0.000270005 Jy
! Component: 150  -  total flux cleaned = 0.000390273 Jy
! Component: 200  -  total flux cleaned = 0.000419087 Jy
! Total flux subtracted in 200 components = 0.000419087 Jy
! Clean residual min=-0.005968 max=0.005905 Jy/beam
! Clean residual mean=-0.000000 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.436826 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.436826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125337Jy  sigma=3.047858
! Fit after  self-cal, rms=0.125337Jy  sigma=3.047827
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125337Jy  sigma=3.047827
! Fit after  self-cal, rms=0.125319Jy  sigma=3.047819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.949 mas, bmaj=4.129 mas, bpa=62.38 degrees
! Estimated noise=0.78486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168911 Jy
! Component: 100  -  total flux cleaned = -0.00193784 Jy
! Component: 150  -  total flux cleaned = -0.00210746 Jy
! Component: 200  -  total flux cleaned = -0.00220697 Jy
! Total flux subtracted in 200 components = -0.00220697 Jy
! Clean residual min=-0.005050 max=0.006012 Jy/beam
! Clean residual mean=0.000004 rms=0.001483 Jy/beam
! Combined flux in latest and established models = 0.434619 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 70 components and 0.434619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125353Jy  sigma=3.048053
! Fit after  self-cal, rms=0.125349Jy  sigma=3.047959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000248516 Jy
! Component: 100  -  total flux cleaned = -0.000294145 Jy
! Component: 150  -  total flux cleaned = -0.000359768 Jy
! Component: 200  -  total flux cleaned = -0.000423691 Jy
! Total flux subtracted in 200 components = -0.000423691 Jy
! Clean residual min=-0.005052 max=0.005909 Jy/beam
! Clean residual mean=0.000005 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.434196 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.434196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125369Jy  sigma=3.048070
! Fit after  self-cal, rms=0.125365Jy  sigma=3.048038
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.713 mas, bpa=67.67 degrees
! Estimated noise=0.56993 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7612 x 1.713 at 67.67 degrees (North through East)
! Clean map  min=-0.0086131  max=0.312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5859 mas, bmaj=1.403 mas, bpa=66.02 degrees
! Estimated noise=0.939888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241589 Jy
! Component: 100  -  total flux cleaned = 0.316244 Jy
! Component: 150  -  total flux cleaned = 0.357633 Jy
! Component: 200  -  total flux cleaned = 0.382977 Jy
! Total flux subtracted in 200 components = 0.382977 Jy
! Clean residual min=-0.013740 max=0.018115 Jy/beam
! Clean residual mean=0.000010 rms=0.003372 Jy/beam
! Combined flux in latest and established models = 0.382977 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.382977 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.713 mas, bpa=67.67 degrees
! Estimated noise=0.56993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259542 Jy
! Component: 100  -  total flux cleaned = 0.0381827 Jy
! Component: 150  -  total flux cleaned = 0.0423278 Jy
! Component: 200  -  total flux cleaned = 0.0457106 Jy
! Total flux subtracted in 200 components = 0.0457106 Jy
! Clean residual min=-0.007694 max=0.008210 Jy/beam
! Clean residual mean=0.000006 rms=0.001652 Jy/beam
! Combined flux in latest and established models = 0.428687 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.428687 Jy
! Inverting map 
! Added new window around map position (44.6, 23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668271 Jy
! Component: 100  -  total flux cleaned = 0.00670509 Jy
! Component: 150  -  total flux cleaned = 0.00669683 Jy
! Component: 200  -  total flux cleaned = 0.00654153 Jy
! Total flux subtracted in 200 components = 0.00654153 Jy
! Clean residual min=-0.006282 max=0.007424 Jy/beam
! Clean residual mean=-0.000003 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.435229 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.435229 Jy
! Inverting map 
! Added new window around map position (-42.8, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359585 Jy
! Component: 100  -  total flux cleaned = 0.00324785 Jy
! Component: 150  -  total flux cleaned = 0.00275358 Jy
! Component: 200  -  total flux cleaned = 0.00259923 Jy
! Total flux subtracted in 200 components = 0.00259923 Jy
! Clean residual min=-0.005960 max=0.005435 Jy/beam
! Clean residual mean=-0.000002 rms=0.001217 Jy/beam
! Combined flux in latest and established models = 0.437828 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.437828 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.949 mas, bmaj=4.129 mas, bpa=62.38 degrees
! Estimated noise=0.78486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00148635 Jy
! Component: 100  -  total flux cleaned = -0.00232862 Jy
! Component: 150  -  total flux cleaned = -0.002553 Jy
! Component: 200  -  total flux cleaned = -0.00274944 Jy
! Total flux subtracted in 200 components = -0.00274944 Jy
! Clean residual min=-0.004227 max=0.004043 Jy/beam
! Clean residual mean=0.000000 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.435079 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170111 Jy
! Component: 100  -  total flux cleaned = -0.000268351 Jy
! Component: 150  -  total flux cleaned = -0.000354966 Jy
! Component: 200  -  total flux cleaned = -0.0004324 Jy
! Total flux subtracted in 200 components = -0.0004324 Jy
! Clean residual min=-0.003956 max=0.004003 Jy/beam
! Clean residual mean=0.000001 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 0.434646 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.434646 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.713 mas, bpa=67.67 degrees
! Estimated noise=0.56993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163052 Jy
! Component: 100  -  total flux cleaned = -0.000307667 Jy
! Component: 150  -  total flux cleaned = -0.000455072 Jy
! Component: 200  -  total flux cleaned = -0.000723953 Jy
! Total flux subtracted in 200 components = -0.000723953 Jy
! Clean residual min=-0.005127 max=0.005864 Jy/beam
! Clean residual mean=0.000002 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.433922 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.433922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124033Jy  sigma=3.024489
! Fit after  self-cal, rms=0.123965Jy  sigma=3.022868
wmodel /J1058+8114_X_map.mod
! wmodel: Unable to open new model file: /J1058+8114_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1058+8114_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7612 x 1.713 at 67.67 degrees (North through East)
! Clean map  min=-0.0071859  max=0.31053 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1058+8114_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.310531 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00109331 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05623 1.05623 2.11247 4.22494 8.44987 16.8997 33.7995 67.599
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.31 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  284.027 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1058+8114_X_dfm.log closed on Fri May 20 00:03:18 2016