! Started logfile: /scr/pima/bg219a_uvs/J1037-2934_X_dfm.log on Fri May 20 00:03:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1037-2934_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1037-2934_X_uva.fits
! AN table 1: 50 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.422857 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1037-2934
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1037-2934_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 198 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.244743Jy  sigma=23.962643
! Fit after  self-cal, rms=0.538358Jy  sigma=11.448861
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6053 mas, bmaj=1.665 mas, bpa=0.6472 degrees
! Estimated noise=0.861641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.405575 Jy
! Component: 100  -  total flux cleaned = 0.582125 Jy
! Total flux subtracted in 100 components = 0.582125 Jy
! Clean residual min=-0.070357 max=0.146127 Jy/beam
! Clean residual mean=-0.001044 rms=0.017500 Jy/beam
! Combined flux in latest and established models = 0.582125 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.582125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.354435Jy  sigma=6.421225
! Fit after  self-cal, rms=0.352064Jy  sigma=6.384306
! Inverting map 
! Added new window around map position (1.2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129936 Jy
! Component: 100  -  total flux cleaned = 0.207049 Jy
! Total flux subtracted in 100 components = 0.207049 Jy
! Clean residual min=-0.047019 max=0.081101 Jy/beam
! Clean residual mean=-0.000681 rms=0.012305 Jy/beam
! Combined flux in latest and established models = 0.789174 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.789174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.264587Jy  sigma=4.886012
! Fit after  self-cal, rms=0.254683Jy  sigma=4.668216
! Inverting map 
! Added new window around map position (-0.2, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0871406 Jy
! Component: 100  -  total flux cleaned = 0.140072 Jy
! Total flux subtracted in 100 components = 0.140072 Jy
! Clean residual min=-0.037027 max=0.047048 Jy/beam
! Clean residual mean=-0.000435 rms=0.007920 Jy/beam
! Combined flux in latest and established models = 0.929246 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.929246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.204215Jy  sigma=3.754255
! Fit after  self-cal, rms=0.200327Jy  sigma=3.677806
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7292 mas, bmaj=2.014 mas, bpa=-0.1176 degrees
! Estimated noise=0.575284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0689281 Jy
! Component: 100  -  total flux cleaned = 0.111331 Jy
! Component: 150  -  total flux cleaned = 0.139894 Jy
! Component: 200  -  total flux cleaned = 0.159769 Jy
! Total flux subtracted in 200 components = 0.159769 Jy
! Clean residual min=-0.028392 max=0.040701 Jy/beam
! Clean residual mean=-0.000294 rms=0.006450 Jy/beam
! Combined flux in latest and established models = 1.08901 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 1.08901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.169262Jy  sigma=3.136960
! Fit after  self-cal, rms=0.167865Jy  sigma=3.107581
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7292 x 2.014 at -0.1176 degrees (North through East)
! Clean map  min=-0.024939  max=0.51174 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        1.01     NL        1.08     
!   OV        1.04     PT        0.95     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.93     MK        1.03     NL        1.10     
!   OV        1.04     PT        0.95     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.94     MK        1.02     NL        1.08     
!   OV        1.04     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.95     MK        0.98     NL        1.09     
!   OV        1.05     PT        0.94     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.94     MK        0.98     NL        1.10     
!   OV        1.04     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.96     MK        0.98     NL        1.10     
!   OV        1.05     PT        0.94     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.95     MK        0.96     NL        1.07     
!   OV        1.05     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.95     MK        0.95     NL        1.06     
!   OV        1.08     PT        0.94     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.94     MK        0.94     NL        1.11     
!   OV        1.04     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.93     MK        0.95     NL        1.07     
!   OV        1.08     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.94     MK        0.92     NL        1.06     
!   OV        1.06     PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.92     MK        0.93     NL        1.08     
!   OV        1.07     PT        0.95     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.167865Jy  sigma=3.107581
! Fit after  self-cal, rms=0.159791Jy  sigma=2.982961
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7259 mas, bmaj=2.015 mas, bpa=-0.4063 degrees
! Estimated noise=0.566035 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024883 Jy
! Component: 100  -  total flux cleaned = 0.0005961 Jy
! Component: 150  -  total flux cleaned = -0.000677031 Jy
! Component: 200  -  total flux cleaned = -0.00151983 Jy
! Total flux subtracted in 200 components = -0.00151983 Jy
! Clean residual min=-0.026334 max=0.021480 Jy/beam
! Clean residual mean=0.000075 rms=0.004303 Jy/beam
! Combined flux in latest and established models = 1.0875 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 1.08749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.158227Jy  sigma=2.954728
! Fit after  self-cal, rms=0.158130Jy  sigma=2.951163
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.158130Jy  sigma=2.951163
! Fit after  self-cal, rms=0.156008Jy  sigma=2.913128
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7263 mas, bmaj=2.009 mas, bpa=-0.5569 degrees
! Estimated noise=0.565956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260242 Jy
! Component: 100  -  total flux cleaned = -0.000528324 Jy
! Component: 150  -  total flux cleaned = -0.000990059 Jy
! Component: 200  -  total flux cleaned = -0.00117992 Jy
! Total flux subtracted in 200 components = -0.00117992 Jy
! Clean residual min=-0.023749 max=0.019564 Jy/beam
! Clean residual mean=0.000103 rms=0.003703 Jy/beam
! Combined flux in latest and established models = 1.08632 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 1.08632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.155348Jy  sigma=2.897892
! Fit after  self-cal, rms=0.155266Jy  sigma=2.895580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125269 Jy
! Component: 100  -  total flux cleaned = 0.00101732 Jy
! Component: 150  -  total flux cleaned = 0.00061186 Jy
! Component: 200  -  total flux cleaned = 0.000428829 Jy
! Total flux subtracted in 200 components = 0.000428829 Jy
! Clean residual min=-0.022935 max=0.018905 Jy/beam
! Clean residual mean=0.000104 rms=0.003597 Jy/beam
! Combined flux in latest and established models = 1.08674 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 1.08674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.154768Jy  sigma=2.884563
! Fit after  self-cal, rms=0.154712Jy  sigma=2.882723
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.154712Jy  sigma=2.882723
! Fit after  self-cal, rms=0.154360Jy  sigma=2.868850
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7244 mas, bmaj=2 mas, bpa=-0.5876 degrees
! Estimated noise=0.563338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414368 Jy
! Component: 100  -  total flux cleaned = 6.89423e-06 Jy
! Component: 150  -  total flux cleaned = -0.000550589 Jy
! Component: 200  -  total flux cleaned = -0.00125406 Jy
! Total flux subtracted in 200 components = -0.00125406 Jy
! Clean residual min=-0.020355 max=0.017726 Jy/beam
! Clean residual mean=0.000052 rms=0.003275 Jy/beam
! Combined flux in latest and established models = 1.08549 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 1.08549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153945Jy  sigma=2.858180
! Fit after  self-cal, rms=0.153920Jy  sigma=2.857266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.06096e-05 Jy
! Component: 100  -  total flux cleaned = -0.000460782 Jy
! Component: 150  -  total flux cleaned = -0.000991435 Jy
! Component: 200  -  total flux cleaned = -0.00148138 Jy
! Total flux subtracted in 200 components = -0.00148138 Jy
! Clean residual min=-0.019420 max=0.017543 Jy/beam
! Clean residual mean=0.000047 rms=0.003192 Jy/beam
! Combined flux in latest and established models = 1.08401 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 1.08401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153569Jy  sigma=2.849575
! Fit after  self-cal, rms=0.153555Jy  sigma=2.848788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153555Jy  sigma=2.848788
! Fit after  self-cal, rms=0.153291Jy  sigma=2.848199
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.208 mas, bmaj=6.553 mas, bpa=6.544 degrees
! Estimated noise=0.88075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00276546 Jy
! Component: 100  -  total flux cleaned = -0.00343008 Jy
! Component: 150  -  total flux cleaned = -0.00420054 Jy
! Component: 200  -  total flux cleaned = -0.00490598 Jy
! Total flux subtracted in 200 components = -0.00490598 Jy
! Clean residual min=-0.020343 max=0.017087 Jy/beam
! Clean residual mean=0.000103 rms=0.005094 Jy/beam
! Combined flux in latest and established models = 1.0791 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 76 components and 1.0791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153093Jy  sigma=2.850405
! Fit after  self-cal, rms=0.153065Jy  sigma=2.849542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000653471 Jy
! Component: 100  -  total flux cleaned = -0.00121152 Jy
! Component: 150  -  total flux cleaned = -0.00184931 Jy
! Component: 200  -  total flux cleaned = -0.00243925 Jy
! Total flux subtracted in 200 components = -0.00243925 Jy
! Clean residual min=-0.020297 max=0.016514 Jy/beam
! Clean residual mean=0.000083 rms=0.005014 Jy/beam
! Combined flux in latest and established models = 1.07666 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 78 components and 1.07666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153037Jy  sigma=2.855138
! Fit after  self-cal, rms=0.153023Jy  sigma=2.854414
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7236 mas, bmaj=1.997 mas, bpa=-0.6675 degrees
! Estimated noise=0.561173 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7236 x 1.997 at -0.6675 degrees (North through East)
! Clean map  min=-0.017  max=0.49266 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6009 mas, bmaj=1.65 mas, bpa=0.1756 degrees
! Estimated noise=0.836691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.407694 Jy
! Component: 100  -  total flux cleaned = 0.60657 Jy
! Component: 150  -  total flux cleaned = 0.723377 Jy
! Component: 200  -  total flux cleaned = 0.804945 Jy
! Total flux subtracted in 200 components = 0.804945 Jy
! Clean residual min=-0.046046 max=0.057918 Jy/beam
! Clean residual mean=-0.000496 rms=0.008201 Jy/beam
! Combined flux in latest and established models = 0.804945 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.804945 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7236 mas, bmaj=1.997 mas, bpa=-0.6675 degrees
! Estimated noise=0.561173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100716 Jy
! Component: 100  -  total flux cleaned = 0.156749 Jy
! Component: 150  -  total flux cleaned = 0.191243 Jy
! Component: 200  -  total flux cleaned = 0.214242 Jy
! Total flux subtracted in 200 components = 0.214242 Jy
! Clean residual min=-0.020832 max=0.022136 Jy/beam
! Clean residual mean=-0.000155 rms=0.003898 Jy/beam
! Combined flux in latest and established models = 1.01919 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 49 components and 1.01919 Jy
! Inverting map 
! Added new window around map position (-1.2, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140039 Jy
! Component: 100  -  total flux cleaned = 0.0228327 Jy
! Component: 150  -  total flux cleaned = 0.0294287 Jy
! Component: 200  -  total flux cleaned = 0.0348437 Jy
! Total flux subtracted in 200 components = 0.0348437 Jy
! Clean residual min=-0.013934 max=0.010888 Jy/beam
! Clean residual mean=-0.000043 rms=0.002789 Jy/beam
! Combined flux in latest and established models = 1.05403 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 1.05403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.208 mas, bmaj=6.553 mas, bpa=6.544 degrees
! Estimated noise=0.88075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119747 Jy
! Component: 100  -  total flux cleaned = 0.0161628 Jy
! Component: 150  -  total flux cleaned = 0.0174641 Jy
! Component: 200  -  total flux cleaned = 0.0177576 Jy
! Total flux subtracted in 200 components = 0.0177576 Jy
! Clean residual min=-0.020477 max=0.015233 Jy/beam
! Clean residual mean=0.000042 rms=0.004688 Jy/beam
! Combined flux in latest and established models = 1.07179 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249091 Jy
! Component: 100  -  total flux cleaned = 0.000466262 Jy
! Component: 150  -  total flux cleaned = 0.000469914 Jy
! Component: 200  -  total flux cleaned = 0.000561831 Jy
! Total flux subtracted in 200 components = 0.000561831 Jy
! Clean residual min=-0.020377 max=0.014892 Jy/beam
! Clean residual mean=0.000048 rms=0.004676 Jy/beam
! Combined flux in latest and established models = 1.07235 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 1.07235 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7236 mas, bmaj=1.997 mas, bpa=-0.6675 degrees
! Estimated noise=0.561173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00073164 Jy
! Component: 100  -  total flux cleaned = -2.55304e-05 Jy
! Component: 150  -  total flux cleaned = -2.81637e-05 Jy
! Component: 200  -  total flux cleaned = -0.0002252 Jy
! Total flux subtracted in 200 components = -0.0002252 Jy
! Clean residual min=-0.012657 max=0.010996 Jy/beam
! Clean residual mean=0.000016 rms=0.002570 Jy/beam
! Combined flux in latest and established models = 1.07213 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 1.07213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.150467Jy  sigma=2.792315
! Fit after  self-cal, rms=0.150093Jy  sigma=2.783401
wmodel /J1037-2934_X_map.mod
! wmodel: Unable to open new model file: /J1037-2934_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1037-2934_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7236 x 1.997 at -0.6675 degrees (North through East)
! Clean map  min=-0.011912  max=0.50194 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1037-2934_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.50194 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00248824 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.48717 1.48717 2.97434 5.94868 11.8974 23.7947 47.5895 95.1789
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0074 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.501 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  201.725 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1037-2934_X_dfm.log closed on Fri May 20 00:03:03 2016