! Started logfile: /scr/pima/bg219a_uvs/J1033+6051_X_dfm.log on Fri May 20 00:02:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1033+6051_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1033+6051_X_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1033+6051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1033+6051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.129933Jy  sigma=26.613136
! Fit after  self-cal, rms=0.424616Jy  sigma=10.033074
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6146 mas, bmaj=1.31 mas, bpa=58.69 degrees
! Estimated noise=0.864819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.441165 Jy
! Component: 100  -  total flux cleaned = 0.537368 Jy
! Total flux subtracted in 100 components = 0.537368 Jy
! Clean residual min=-0.019676 max=0.026832 Jy/beam
! Clean residual mean=0.000089 rms=0.005006 Jy/beam
! Combined flux in latest and established models = 0.537368 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.537368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113477Jy  sigma=2.741636
! Fit after  self-cal, rms=0.113476Jy  sigma=2.741601
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7888 mas, bmaj=1.632 mas, bpa=58.57 degrees
! Estimated noise=0.437416 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446507 Jy
! Component: 100  -  total flux cleaned = 0.0646861 Jy
! Component: 150  -  total flux cleaned = 0.0759809 Jy
! Component: 200  -  total flux cleaned = 0.0831082 Jy
! Total flux subtracted in 200 components = 0.0831082 Jy
! Clean residual min=-0.007824 max=0.009109 Jy/beam
! Clean residual mean=0.000136 rms=0.002328 Jy/beam
! Combined flux in latest and established models = 0.620476 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.620476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096370Jy  sigma=2.325669
! Fit after  self-cal, rms=0.096321Jy  sigma=2.324340
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7888 x 1.632 at 58.57 degrees (North through East)
! Clean map  min=-0.0070728  max=0.58696 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        0.99     OV        1.04     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.01     OV        1.05     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.00     OV        1.04     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.03     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.00     OV        1.02     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        0.99     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        0.99     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        0.98     OV        1.04     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        0.98     OV        1.02     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.096321Jy  sigma=2.324340
! Fit after  self-cal, rms=0.095127Jy  sigma=2.285428
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7914 mas, bmaj=1.637 mas, bpa=58.53 degrees
! Estimated noise=0.434771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257508 Jy
! Component: 100  -  total flux cleaned = 1.41642e-05 Jy
! Component: 150  -  total flux cleaned = -0.000158411 Jy
! Component: 200  -  total flux cleaned = -0.0002215 Jy
! Total flux subtracted in 200 components = -0.0002215 Jy
! Clean residual min=-0.004367 max=0.005187 Jy/beam
! Clean residual mean=0.000028 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.620255 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.620255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095056Jy  sigma=2.283789
! Fit after  self-cal, rms=0.095050Jy  sigma=2.283601
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095050Jy  sigma=2.283601
! Fit after  self-cal, rms=0.094865Jy  sigma=2.280527
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7919 mas, bmaj=1.636 mas, bpa=58.57 degrees
! Estimated noise=0.434459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000546252 Jy
! Component: 100  -  total flux cleaned = -0.000620477 Jy
! Component: 150  -  total flux cleaned = -0.000676934 Jy
! Component: 200  -  total flux cleaned = -0.000688462 Jy
! Total flux subtracted in 200 components = -0.000688462 Jy
! Clean residual min=-0.004073 max=0.005227 Jy/beam
! Clean residual mean=0.000034 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.619566 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 30 components and 0.619566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094852Jy  sigma=2.280285
! Fit after  self-cal, rms=0.094851Jy  sigma=2.280215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00476829 Jy
! Component: 100  -  total flux cleaned = 0.00722713 Jy
! Component: 150  -  total flux cleaned = 0.00886484 Jy
! Component: 200  -  total flux cleaned = 0.00972469 Jy
! Total flux subtracted in 200 components = 0.00972469 Jy
! Clean residual min=-0.003199 max=0.003677 Jy/beam
! Clean residual mean=0.000000 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.629291 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.629291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094596Jy  sigma=2.274849
! Fit after  self-cal, rms=0.094581Jy  sigma=2.274449
! Inverting map 
! Added new window around map position (38, 46.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186081 Jy
! Component: 100  -  total flux cleaned = 0.00208458 Jy
! Component: 150  -  total flux cleaned = 0.00220741 Jy
! Component: 200  -  total flux cleaned = 0.0024791 Jy
! Total flux subtracted in 200 components = 0.0024791 Jy
! Clean residual min=-0.003391 max=0.003018 Jy/beam
! Clean residual mean=-0.000007 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.63177 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 77 components and 0.63177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094456Jy  sigma=2.271726
! Fit after  self-cal, rms=0.094440Jy  sigma=2.271346
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094440Jy  sigma=2.271346
! Fit after  self-cal, rms=0.094520Jy  sigma=2.270956
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7914 mas, bmaj=1.636 mas, bpa=58.56 degrees
! Estimated noise=0.434732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00099921 Jy
! Component: 100  -  total flux cleaned = 0.00130846 Jy
! Component: 150  -  total flux cleaned = 0.00157739 Jy
! Component: 200  -  total flux cleaned = 0.00186656 Jy
! Total flux subtracted in 200 components = 0.00186656 Jy
! Clean residual min=-0.003099 max=0.002623 Jy/beam
! Clean residual mean=-0.000005 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.633637 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.633637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094447Jy  sigma=2.269211
! Fit after  self-cal, rms=0.094440Jy  sigma=2.269021
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394921 Jy
! Component: 100  -  total flux cleaned = 0.000538046 Jy
! Component: 150  -  total flux cleaned = 0.000714524 Jy
! Component: 200  -  total flux cleaned = 0.000878049 Jy
! Total flux subtracted in 200 components = 0.000878049 Jy
! Clean residual min=-0.003150 max=0.002434 Jy/beam
! Clean residual mean=-0.000008 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.634515 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 98 components and 0.634515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094399Jy  sigma=2.268059
! Fit after  self-cal, rms=0.094396Jy  sigma=2.267958
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094396Jy  sigma=2.267958
! Fit after  self-cal, rms=0.094469Jy  sigma=2.267696
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.003 mas, bmaj=4.017 mas, bpa=50.76 degrees
! Estimated noise=0.591908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113057 Jy
! Component: 100  -  total flux cleaned = 0.00154242 Jy
! Component: 150  -  total flux cleaned = 0.00183723 Jy
! Component: 200  -  total flux cleaned = 0.00204757 Jy
! Total flux subtracted in 200 components = 0.00204757 Jy
! Clean residual min=-0.002994 max=0.002849 Jy/beam
! Clean residual mean=-0.000017 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.636562 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 0.636563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094459Jy  sigma=2.267442
! Fit after  self-cal, rms=0.094460Jy  sigma=2.267412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000277814 Jy
! Component: 100  -  total flux cleaned = 0.000302305 Jy
! Component: 150  -  total flux cleaned = 0.000326045 Jy
! Component: 200  -  total flux cleaned = 0.000326022 Jy
! Total flux subtracted in 200 components = 0.000326022 Jy
! Clean residual min=-0.002970 max=0.002817 Jy/beam
! Clean residual mean=-0.000019 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.636889 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 115 components and 0.636889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094454Jy  sigma=2.267243
! Fit after  self-cal, rms=0.094454Jy  sigma=2.267233
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7911 mas, bmaj=1.635 mas, bpa=58.55 degrees
! Estimated noise=0.435052 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7911 x 1.635 at 58.55 degrees (North through East)
! Clean map  min=-0.0030758  max=0.58365 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094454Jy  sigma=2.267233
! Fit after  self-cal, rms=0.089029Jy  sigma=2.138958
! Inverting map and beam 
! Estimated beam: bmin=0.7932 mas, bmaj=1.642 mas, bpa=58.47 degrees
! Estimated noise=0.422248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0124979 Jy
! Component: 100  -  total flux cleaned = -0.0119655 Jy
! Component: 150  -  total flux cleaned = -0.0115379 Jy
! Component: 200  -  total flux cleaned = -0.0114282 Jy
! Total flux subtracted in 200 components = -0.0114282 Jy
! Clean residual min=-0.003373 max=0.004229 Jy/beam
! Clean residual mean=0.000004 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.62546 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.62546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087042Jy  sigma=2.093026
! Fit after  self-cal, rms=0.087037Jy  sigma=2.092848
! Inverting map 
! Added new window around map position (0, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245342 Jy
! Component: 100  -  total flux cleaned = 0.00212759 Jy
! Component: 150  -  total flux cleaned = 0.00199491 Jy
! Component: 200  -  total flux cleaned = 0.0018839 Jy
! Total flux subtracted in 200 components = 0.0018839 Jy
! Clean residual min=-0.002801 max=0.002439 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.627344 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 156 components and 0.627344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086830Jy  sigma=2.089015
! Fit after  self-cal, rms=0.086825Jy  sigma=2.088855
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086825Jy  sigma=2.088855
! Fit after  self-cal, rms=0.084793Jy  sigma=2.044425
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6185 mas, bmaj=1.318 mas, bpa=58.57 degrees
! Estimated noise=0.820885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.41871 Jy
! Component: 100  -  total flux cleaned = 0.51027 Jy
! Component: 150  -  total flux cleaned = 0.532988 Jy
! Component: 200  -  total flux cleaned = 0.545071 Jy
! Total flux subtracted in 200 components = 0.545071 Jy
! Clean residual min=-0.011641 max=0.011383 Jy/beam
! Clean residual mean=0.000051 rms=0.002911 Jy/beam
! Combined flux in latest and established models = 0.545071 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.545071 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7948 mas, bmaj=1.647 mas, bpa=58.41 degrees
! Estimated noise=0.411328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200639 Jy
! Component: 100  -  total flux cleaned = 0.0311925 Jy
! Component: 150  -  total flux cleaned = 0.0389467 Jy
! Component: 200  -  total flux cleaned = 0.0447258 Jy
! Total flux subtracted in 200 components = 0.0447258 Jy
! Clean residual min=-0.004387 max=0.004491 Jy/beam
! Clean residual mean=0.000090 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 0.589797 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 36 components and 0.589797 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.002 mas, bmaj=4.02 mas, bpa=50.98 degrees
! Estimated noise=0.555516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836929 Jy
! Component: 100  -  total flux cleaned = 0.0136182 Jy
! Component: 150  -  total flux cleaned = 0.0172433 Jy
! Component: 200  -  total flux cleaned = 0.0188716 Jy
! Total flux subtracted in 200 components = 0.0188716 Jy
! Clean residual min=-0.004130 max=0.004150 Jy/beam
! Clean residual mean=0.000072 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.608668 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112111 Jy
! Component: 100  -  total flux cleaned = 0.00198119 Jy
! Component: 150  -  total flux cleaned = 0.00270212 Jy
! Component: 200  -  total flux cleaned = 0.00321708 Jy
! Total flux subtracted in 200 components = 0.00321708 Jy
! Clean residual min=-0.003835 max=0.003679 Jy/beam
! Clean residual mean=0.000043 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.611885 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 118 components and 0.611886 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7948 mas, bmaj=1.647 mas, bpa=58.41 degrees
! Estimated noise=0.411328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000512034 Jy
! Component: 100  -  total flux cleaned = -0.000342117 Jy
! Component: 150  -  total flux cleaned = -0.000134272 Jy
! Component: 200  -  total flux cleaned = 5.38769e-05 Jy
! Total flux subtracted in 200 components = 5.38769e-05 Jy
! Clean residual min=-0.003458 max=0.002903 Jy/beam
! Clean residual mean=0.000015 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.611939 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 142 components and 0.61194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082931Jy  sigma=2.006355
! Fit after  self-cal, rms=0.082903Jy  sigma=2.005489
wmodel /J1033+6051_X_map.mod
! wmodel: Unable to open new model file: /J1033+6051_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1033+6051_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7948 x 1.647 at 58.41 degrees (North through East)
! Clean map  min=-0.0033263  max=0.54938 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1033+6051_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.549378 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000608784 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.33244 0.33244 0.66488 1.32976 2.65952 5.31904 10.6381 21.2762 42.5523 85.1047
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.549 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  902.417 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1033+6051_X_dfm.log closed on Fri May 20 00:02:48 2016