! Started logfile: /scr/pima/bg219a_uvs/J1031+6020_X_dfm.log on Fri May 20 00:02:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1031+6020_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1031+6020_X_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1031+6020
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1031+6020_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.058279Jy  sigma=27.801119
! Fit after  self-cal, rms=0.649698Jy  sigma=17.230056
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6096 mas, bmaj=1.377 mas, bpa=54.89 degrees
! Estimated noise=0.687242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.248257 Jy
! Component: 100  -  total flux cleaned = 0.333417 Jy
! Total flux subtracted in 100 components = 0.333417 Jy
! Clean residual min=-0.026968 max=0.037738 Jy/beam
! Clean residual mean=0.000109 rms=0.006138 Jy/beam
! Combined flux in latest and established models = 0.333417 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.333417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114609Jy  sigma=2.986089
! Fit after  self-cal, rms=0.113553Jy  sigma=2.953314
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436903 Jy
! Component: 100  -  total flux cleaned = 0.0662799 Jy
! Total flux subtracted in 100 components = 0.0662799 Jy
! Clean residual min=-0.016474 max=0.013495 Jy/beam
! Clean residual mean=0.000072 rms=0.003153 Jy/beam
! Combined flux in latest and established models = 0.399697 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.399697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081254Jy  sigma=2.118407
! Fit after  self-cal, rms=0.080956Jy  sigma=2.108523
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7878 mas, bmaj=1.679 mas, bpa=56.7 degrees
! Estimated noise=0.319211 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306532 Jy
! Component: 100  -  total flux cleaned = 0.0472218 Jy
! Component: 150  -  total flux cleaned = 0.0575859 Jy
! Component: 200  -  total flux cleaned = 0.0644141 Jy
! Total flux subtracted in 200 components = 0.0644141 Jy
! Clean residual min=-0.008388 max=0.014585 Jy/beam
! Clean residual mean=0.000179 rms=0.002773 Jy/beam
! Combined flux in latest and established models = 0.464111 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.464111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067954Jy  sigma=1.786690
! Fit after  self-cal, rms=0.067899Jy  sigma=1.783531
! Inverting map 
! Added new window around map position (-1.4, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137295 Jy
! Component: 100  -  total flux cleaned = 0.0211622 Jy
! Component: 150  -  total flux cleaned = 0.0263621 Jy
! Component: 200  -  total flux cleaned = 0.030311 Jy
! Total flux subtracted in 200 components = 0.030311 Jy
! Clean residual min=-0.005169 max=0.005277 Jy/beam
! Clean residual mean=0.000086 rms=0.001316 Jy/beam
! Combined flux in latest and established models = 0.494422 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 55 components and 0.494422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064797Jy  sigma=1.706831
! Fit after  self-cal, rms=0.064574Jy  sigma=1.699945
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7878 x 1.679 at 56.7 degrees (North through East)
! Clean map  min=-0.0042276  max=0.34529 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.01     OV        1.03     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.02     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.02     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        0.98     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.064574Jy  sigma=1.699945
! Fit after  self-cal, rms=0.063677Jy  sigma=1.683924
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7887 mas, bmaj=1.683 mas, bpa=56.58 degrees
! Estimated noise=0.317281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203413 Jy
! Component: 100  -  total flux cleaned = 0.00276192 Jy
! Component: 150  -  total flux cleaned = 0.00298364 Jy
! Component: 200  -  total flux cleaned = 0.00315177 Jy
! Total flux subtracted in 200 components = 0.00315177 Jy
! Clean residual min=-0.002862 max=0.002431 Jy/beam
! Clean residual mean=0.000011 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.497574 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 70 components and 0.497574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063537Jy  sigma=1.679979
! Fit after  self-cal, rms=0.063523Jy  sigma=1.679612
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063523Jy  sigma=1.679612
! Fit after  self-cal, rms=0.063453Jy  sigma=1.677293
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7891 mas, bmaj=1.682 mas, bpa=56.61 degrees
! Estimated noise=0.31717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580877 Jy
! Component: 100  -  total flux cleaned = 0.000851502 Jy
! Component: 150  -  total flux cleaned = 0.00108634 Jy
! Component: 200  -  total flux cleaned = 0.00128915 Jy
! Total flux subtracted in 200 components = 0.00128915 Jy
! Clean residual min=-0.002337 max=0.002103 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.498863 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.498863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063420Jy  sigma=1.676397
! Fit after  self-cal, rms=0.063420Jy  sigma=1.676304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.55506e-05 Jy
! Component: 100  -  total flux cleaned = 0.000265468 Jy
! Component: 150  -  total flux cleaned = 0.000415858 Jy
! Component: 200  -  total flux cleaned = 0.000517446 Jy
! Total flux subtracted in 200 components = 0.000517446 Jy
! Clean residual min=-0.002193 max=0.002042 Jy/beam
! Clean residual mean=-0.000003 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.49938 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 94 components and 0.49938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063410Jy  sigma=1.676096
! Fit after  self-cal, rms=0.063410Jy  sigma=1.676059
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063410Jy  sigma=1.676059
! Fit after  self-cal, rms=0.063445Jy  sigma=1.676002
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7895 mas, bmaj=1.683 mas, bpa=56.63 degrees
! Estimated noise=0.317327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.80656e-05 Jy
! Component: 100  -  total flux cleaned = 0.000154703 Jy
! Component: 150  -  total flux cleaned = 0.00023336 Jy
! Component: 200  -  total flux cleaned = 0.000281439 Jy
! Total flux subtracted in 200 components = 0.000281439 Jy
! Clean residual min=-0.002035 max=0.001973 Jy/beam
! Clean residual mean=-0.000005 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.499662 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.499662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063439Jy  sigma=1.675871
! Fit after  self-cal, rms=0.063439Jy  sigma=1.675847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42033e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107532 Jy
! Component: 150  -  total flux cleaned = 0.000178156 Jy
! Component: 200  -  total flux cleaned = 0.000216961 Jy
! Total flux subtracted in 200 components = 0.000216961 Jy
! Clean residual min=-0.002011 max=0.001962 Jy/beam
! Clean residual mean=-0.000006 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.499879 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.499879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063436Jy  sigma=1.675779
! Fit after  self-cal, rms=0.063436Jy  sigma=1.675762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063436Jy  sigma=1.675762
! Fit after  self-cal, rms=0.063459Jy  sigma=1.675744
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.963 mas, bmaj=3.997 mas, bpa=49.9 degrees
! Estimated noise=0.439691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023703 Jy
! Component: 100  -  total flux cleaned = -0.000156447 Jy
! Component: 150  -  total flux cleaned = -0.000176841 Jy
! Component: 200  -  total flux cleaned = -0.000202488 Jy
! Total flux subtracted in 200 components = -0.000202488 Jy
! Clean residual min=-0.002982 max=0.002393 Jy/beam
! Clean residual mean=-0.000014 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.499676 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 111 components and 0.499676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063460Jy  sigma=1.675768
! Fit after  self-cal, rms=0.063459Jy  sigma=1.675727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.62399e-05 Jy
! Component: 100  -  total flux cleaned = -2.57078e-05 Jy
! Component: 150  -  total flux cleaned = -4.25384e-05 Jy
! Component: 200  -  total flux cleaned = -5.05222e-05 Jy
! Total flux subtracted in 200 components = -5.05222e-05 Jy
! Clean residual min=-0.002960 max=0.002384 Jy/beam
! Clean residual mean=-0.000013 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.499626 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 115 components and 0.499626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063460Jy  sigma=1.675749
! Fit after  self-cal, rms=0.063460Jy  sigma=1.675729
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7897 mas, bmaj=1.683 mas, bpa=56.64 degrees
! Estimated noise=0.317446 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7897 x 1.683 at 56.64 degrees (North through East)
! Clean map  min=-0.0019082  max=0.34343 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6101 mas, bmaj=1.379 mas, bpa=54.83 degrees
! Estimated noise=0.685245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.248133 Jy
! Component: 100  -  total flux cleaned = 0.336548 Jy
! Component: 150  -  total flux cleaned = 0.379625 Jy
! Component: 200  -  total flux cleaned = 0.402123 Jy
! Total flux subtracted in 200 components = 0.402123 Jy
! Clean residual min=-0.010741 max=0.012911 Jy/beam
! Clean residual mean=0.000059 rms=0.002732 Jy/beam
! Combined flux in latest and established models = 0.402123 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.402123 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7897 mas, bmaj=1.683 mas, bpa=56.64 degrees
! Estimated noise=0.317446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029305 Jy
! Component: 100  -  total flux cleaned = 0.0465077 Jy
! Component: 150  -  total flux cleaned = 0.0583696 Jy
! Component: 200  -  total flux cleaned = 0.0670112 Jy
! Total flux subtracted in 200 components = 0.0670112 Jy
! Clean residual min=-0.004852 max=0.005826 Jy/beam
! Clean residual mean=0.000092 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.469134 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 42 components and 0.469134 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.963 mas, bmaj=3.997 mas, bpa=49.9 degrees
! Estimated noise=0.439691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127647 Jy
! Component: 100  -  total flux cleaned = 0.0195494 Jy
! Component: 150  -  total flux cleaned = 0.0233872 Jy
! Component: 200  -  total flux cleaned = 0.0256522 Jy
! Total flux subtracted in 200 components = 0.0256522 Jy
! Clean residual min=-0.003385 max=0.002603 Jy/beam
! Clean residual mean=0.000027 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.494786 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141798 Jy
! Component: 100  -  total flux cleaned = 0.00233247 Jy
! Component: 150  -  total flux cleaned = 0.00293764 Jy
! Component: 200  -  total flux cleaned = 0.00335016 Jy
! Total flux subtracted in 200 components = 0.00335016 Jy
! Clean residual min=-0.002977 max=0.002415 Jy/beam
! Clean residual mean=-0.000001 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.498136 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 108 components and 0.498136 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7897 mas, bmaj=1.683 mas, bpa=56.64 degrees
! Estimated noise=0.317446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241396 Jy
! Component: 100  -  total flux cleaned = -0.000139993 Jy
! Component: 150  -  total flux cleaned = -6.33721e-05 Jy
! Component: 200  -  total flux cleaned = 3.03997e-05 Jy
! Total flux subtracted in 200 components = 3.03997e-05 Jy
! Clean residual min=-0.002163 max=0.002149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.498167 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 0.498167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063498Jy  sigma=1.676661
! Fit after  self-cal, rms=0.063484Jy  sigma=1.676332
wmodel /J1031+6020_X_map.mod
! wmodel: Unable to open new model file: /J1031+6020_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1031+6020_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7897 x 1.683 at 56.64 degrees (North through East)
! Clean map  min=-0.0020145  max=0.34389 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1031+6020_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.343886 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00049162 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.428881 0.428881 0.857762 1.71552 3.43105 6.86209 13.7242 27.4484 54.8967
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.343 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  699.495 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1031+6020_X_dfm.log closed on Fri May 20 00:02:41 2016