! Started logfile: /scr/pima/bg219a_uvs/J1007-1247_X_dfm.log on Fri May 20 00:02:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1007-1247_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1007-1247_X_uva.fits
! AN table 1: 41 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.839721 visibilities/baseline/integration-bin.
! Found source: J1007-1247
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8676 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1007-1247_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020055Jy  sigma=28.146227
! Fit after  self-cal, rms=0.822593Jy  sigma=22.682566
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5852 mas, bmaj=1.573 mas, bpa=-2.421 degrees
! Estimated noise=0.53949 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132144 Jy
! Component: 100  -  total flux cleaned = 0.1643 Jy
! Total flux subtracted in 100 components = 0.1643 Jy
! Clean residual min=-0.007445 max=0.012964 Jy/beam
! Clean residual mean=-0.000020 rms=0.001995 Jy/beam
! Combined flux in latest and established models = 0.1643 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.1643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059979Jy  sigma=1.641959
! Fit after  self-cal, rms=0.059904Jy  sigma=1.639911
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013614 Jy
! Component: 100  -  total flux cleaned = 0.0210712 Jy
! Total flux subtracted in 100 components = 0.0210712 Jy
! Clean residual min=-0.004684 max=0.008164 Jy/beam
! Clean residual mean=-0.000013 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 0.185371 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 0.185371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054960Jy  sigma=1.492065
! Fit after  self-cal, rms=0.054965Jy  sigma=1.491751
! Inverting map 
! Added new window around map position (0.6, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00747252 Jy
! Component: 100  -  total flux cleaned = 0.0121371 Jy
! Total flux subtracted in 100 components = 0.0121371 Jy
! Clean residual min=-0.003850 max=0.004298 Jy/beam
! Clean residual mean=-0.000010 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.197508 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.197508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053287Jy  sigma=1.441730
! Fit after  self-cal, rms=0.053209Jy  sigma=1.439702
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7311 mas, bmaj=1.885 mas, bpa=-3.122 degrees
! Estimated noise=0.282044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736298 Jy
! Component: 100  -  total flux cleaned = 0.0121875 Jy
! Component: 150  -  total flux cleaned = 0.0155125 Jy
! Component: 200  -  total flux cleaned = 0.0178189 Jy
! Total flux subtracted in 200 components = 0.0178189 Jy
! Clean residual min=-0.003754 max=0.003494 Jy/beam
! Clean residual mean=-0.000008 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.215327 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 50 components and 0.215327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052069Jy  sigma=1.404758
! Fit after  self-cal, rms=0.052041Jy  sigma=1.403972
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7311 x 1.885 at -3.122 degrees (North through East)
! Clean map  min=-0.0032449  max=0.1752 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        1.01     MK        1.02     NL        0.99     
!   OV        0.98     PT        0.95     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        1.00     MK        0.99     NL        1.01     
!   OV        1.00     PT        0.94     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        0.98     MK        0.99     NL        1.00     
!   OV        1.01     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.02     MK        0.98     NL        1.03     
!   OV        0.99     PT        0.94     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        1.00     NL        0.99     
!   OV        0.99     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.01     MK        1.02     NL        1.00     
!   OV        1.01     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.01     MK        0.99     NL        1.01     
!   OV        0.98     PT        0.95     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.98     MK        1.02     NL        1.02     
!   OV        0.99     PT        0.94     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        1.00     MK        1.00     NL        1.05     
!   OV        1.00     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        0.99     NL        1.01     
!   OV        1.01     PT        0.97     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.99     MK        1.01     NL        1.00     
!   OV        1.02     PT        0.98     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.96     MK        1.02     NL        1.04     
!   OV        1.03     PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.052041Jy  sigma=1.403972
! Fit after  self-cal, rms=0.051653Jy  sigma=1.393715
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7336 mas, bmaj=1.891 mas, bpa=-3.123 degrees
! Estimated noise=0.280723 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497082 Jy
! Component: 100  -  total flux cleaned = 0.000603108 Jy
! Component: 150  -  total flux cleaned = 0.000666995 Jy
! Component: 200  -  total flux cleaned = 0.000683043 Jy
! Total flux subtracted in 200 components = 0.000683043 Jy
! Clean residual min=-0.002339 max=0.003276 Jy/beam
! Clean residual mean=0.000002 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.21601 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 0.21601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051632Jy  sigma=1.393030
! Fit after  self-cal, rms=0.051629Jy  sigma=1.392939
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051629Jy  sigma=1.392939
! Fit after  self-cal, rms=0.051645Jy  sigma=1.387472
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.734 mas, bmaj=1.891 mas, bpa=-3.186 degrees
! Estimated noise=0.280918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.9474e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125936 Jy
! Component: 150  -  total flux cleaned = 0.00012606 Jy
! Component: 200  -  total flux cleaned = 0.000140533 Jy
! Total flux subtracted in 200 components = 0.000140533 Jy
! Clean residual min=-0.002131 max=0.003116 Jy/beam
! Clean residual mean=0.000001 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.21615 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.21615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051636Jy  sigma=1.387142
! Fit after  self-cal, rms=0.051643Jy  sigma=1.387106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289504 Jy
! Component: 100  -  total flux cleaned = 0.00436478 Jy
! Component: 150  -  total flux cleaned = 0.00483417 Jy
! Component: 200  -  total flux cleaned = 0.00508881 Jy
! Total flux subtracted in 200 components = 0.00508881 Jy
! Clean residual min=-0.001663 max=0.002053 Jy/beam
! Clean residual mean=0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.221239 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 86 components and 0.221239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051475Jy  sigma=1.382658
! Fit after  self-cal, rms=0.051469Jy  sigma=1.382493
! Inverting map 
! Added new window around map position (-9, 41).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156054 Jy
! Component: 100  -  total flux cleaned = 0.00214261 Jy
! Component: 150  -  total flux cleaned = 0.00265801 Jy
! Component: 200  -  total flux cleaned = 0.0031411 Jy
! Total flux subtracted in 200 components = 0.0031411 Jy
! Clean residual min=-0.001414 max=0.001642 Jy/beam
! Clean residual mean=-0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.22438 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.22438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051396Jy  sigma=1.380319
! Fit after  self-cal, rms=0.051394Jy  sigma=1.380256
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051394Jy  sigma=1.380256
! Fit after  self-cal, rms=0.051290Jy  sigma=1.380047
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7348 mas, bmaj=1.892 mas, bpa=-3.172 degrees
! Estimated noise=0.280301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675575 Jy
! Component: 100  -  total flux cleaned = 0.00104003 Jy
! Component: 150  -  total flux cleaned = 0.00130387 Jy
! Component: 200  -  total flux cleaned = 0.001493 Jy
! Total flux subtracted in 200 components = 0.001493 Jy
! Clean residual min=-0.001318 max=0.001518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.225873 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 106 components and 0.225873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051268Jy  sigma=1.379456
! Fit after  self-cal, rms=0.051268Jy  sigma=1.379440
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, 31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138811 Jy
! Component: 100  -  total flux cleaned = 0.0016305 Jy
! Component: 150  -  total flux cleaned = 0.0016545 Jy
! Component: 200  -  total flux cleaned = 0.0016736 Jy
! Total flux subtracted in 200 components = 0.0016736 Jy
! Clean residual min=-0.001305 max=0.001188 Jy/beam
! Clean residual mean=0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.227547 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.227547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051226Jy  sigma=1.378336
! Fit after  self-cal, rms=0.051225Jy  sigma=1.378282
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051225Jy  sigma=1.378282
! Fit after  self-cal, rms=0.051159Jy  sigma=1.378154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.061 mas, bmaj=5.052 mas, bpa=-5.225 degrees
! Estimated noise=0.385013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311964 Jy
! Component: 100  -  total flux cleaned = 0.000262944 Jy
! Component: 150  -  total flux cleaned = 0.000242376 Jy
! Component: 200  -  total flux cleaned = 0.000241002 Jy
! Total flux subtracted in 200 components = 0.000241002 Jy
! Clean residual min=-0.001258 max=0.001556 Jy/beam
! Clean residual mean=0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.227788 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 0.227788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051157Jy  sigma=1.377992
! Fit after  self-cal, rms=0.051155Jy  sigma=1.377953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204229 Jy
! Component: 100  -  total flux cleaned = 0.000169725 Jy
! Component: 150  -  total flux cleaned = 0.00013816 Jy
! Component: 200  -  total flux cleaned = 0.000124168 Jy
! Total flux subtracted in 200 components = 0.000124168 Jy
! Clean residual min=-0.001154 max=0.001532 Jy/beam
! Clean residual mean=0.000001 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.227912 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 154 components and 0.227912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051156Jy  sigma=1.377917
! Fit after  self-cal, rms=0.051155Jy  sigma=1.377901
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7346 mas, bmaj=1.891 mas, bpa=-3.206 degrees
! Estimated noise=0.279904 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7346 x 1.891 at -3.206 degrees (North through East)
! Clean map  min=-0.0010769  max=0.17427 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5875 mas, bmaj=1.575 mas, bpa=-2.489 degrees
! Estimated noise=0.539024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131919 Jy
! Component: 100  -  total flux cleaned = 0.164101 Jy
! Component: 150  -  total flux cleaned = 0.178193 Jy
! Component: 200  -  total flux cleaned = 0.186394 Jy
! Total flux subtracted in 200 components = 0.186394 Jy
! Clean residual min=-0.004017 max=0.005059 Jy/beam
! Clean residual mean=-0.000010 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.186395 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.186395 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7346 mas, bmaj=1.891 mas, bpa=-3.206 degrees
! Estimated noise=0.279904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00958897 Jy
! Component: 100  -  total flux cleaned = 0.0156838 Jy
! Component: 150  -  total flux cleaned = 0.0201321 Jy
! Component: 200  -  total flux cleaned = 0.0235313 Jy
! Total flux subtracted in 200 components = 0.0235313 Jy
! Clean residual min=-0.002298 max=0.002824 Jy/beam
! Clean residual mean=-0.000004 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.209926 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 56 components and 0.209926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.061 mas, bmaj=5.052 mas, bpa=-5.225 degrees
! Estimated noise=0.385013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485128 Jy
! Component: 100  -  total flux cleaned = 0.00779022 Jy
! Component: 150  -  total flux cleaned = 0.00996933 Jy
! Component: 200  -  total flux cleaned = 0.0116378 Jy
! Total flux subtracted in 200 components = 0.0116378 Jy
! Clean residual min=-0.001996 max=0.001845 Jy/beam
! Clean residual mean=-0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.221564 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130119 Jy
! Component: 100  -  total flux cleaned = 0.0020498 Jy
! Component: 150  -  total flux cleaned = 0.00262168 Jy
! Component: 200  -  total flux cleaned = 0.00304159 Jy
! Total flux subtracted in 200 components = 0.00304159 Jy
! Clean residual min=-0.001429 max=0.001425 Jy/beam
! Clean residual mean=0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.224605 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 91 components and 0.224605 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7346 mas, bmaj=1.891 mas, bpa=-3.206 degrees
! Estimated noise=0.279904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012113 Jy
! Component: 100  -  total flux cleaned = 0.00158192 Jy
! Component: 150  -  total flux cleaned = 0.00185242 Jy
! Component: 200  -  total flux cleaned = 0.00193012 Jy
! Total flux subtracted in 200 components = 0.00193012 Jy
! Clean residual min=-0.001293 max=0.001234 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.226535 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.226535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051260Jy  sigma=1.380279
! Fit after  self-cal, rms=0.051238Jy  sigma=1.379844
wmodel /J1007-1247_X_map.mod
! wmodel: Unable to open new model file: /J1007-1247_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1007-1247_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7346 x 1.891 at -3.206 degrees (North through East)
! Clean map  min=-0.0011  max=0.17449 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1007-1247_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.17449 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00031674 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.544569 0.544569 1.08914 2.17828 4.35656 8.71311 17.4262 34.8524 69.7049
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  550.893 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1007-1247_X_dfm.log closed on Fri May 20 00:02:34 2016