! Started logfile: /scr/pima/bg219a_uvs/J1007-1247_S_dfm.log on Fri May 20 00:02:28 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J1007-1247_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1007-1247_S_uva.fits ! AN table 1: 41 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.839721 visibilities/baseline/integration-bin. ! Found source: J1007-1247 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2892 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1007-1247_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.015748Jy sigma=22.310130 ! Fit after self-cal, rms=0.751011Jy sigma=16.510400 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=6.408 mas, bpa=-2.815 degrees ! Estimated noise=0.956463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187371 Jy ! Component: 100 - total flux cleaned = 0.244693 Jy ! Total flux subtracted in 100 components = 0.244693 Jy ! Clean residual min=-0.012031 max=0.024274 Jy/beam ! Clean residual mean=0.000042 rms=0.003591 Jy/beam ! Combined flux in latest and established models = 0.244693 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.244693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074282Jy sigma=1.589868 ! Fit after self-cal, rms=0.074037Jy sigma=1.585763 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025563 Jy ! Component: 100 - total flux cleaned = 0.0380254 Jy ! Total flux subtracted in 100 components = 0.0380254 Jy ! Clean residual min=-0.007427 max=0.012506 Jy/beam ! Clean residual mean=0.000019 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.282718 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.282718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062885Jy sigma=1.318288 ! Fit after self-cal, rms=0.062777Jy sigma=1.316520 ! Inverting map ! Added new window around map position (3, 11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120867 Jy ! Component: 100 - total flux cleaned = 0.0189376 Jy ! Total flux subtracted in 100 components = 0.0189376 Jy ! Clean residual min=-0.005568 max=0.005496 Jy/beam ! Clean residual mean=0.000010 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.301656 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.301656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059680Jy sigma=1.240696 ! Fit after self-cal, rms=0.059514Jy sigma=1.237409 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=7.29 mas, bpa=-5.216 degrees ! Estimated noise=0.618423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795518 Jy ! Component: 100 - total flux cleaned = 0.0127712 Jy ! Component: 150 - total flux cleaned = 0.0159532 Jy ! Component: 200 - total flux cleaned = 0.0181244 Jy ! Total flux subtracted in 200 components = 0.0181244 Jy ! Clean residual min=-0.004585 max=0.003936 Jy/beam ! Clean residual mean=0.000002 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.31978 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 65 components and 0.31978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058393Jy sigma=1.209307 ! Fit after self-cal, rms=0.058359Jy sigma=1.208446 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.738 x 7.29 at -5.216 degrees (North through East) ! Clean map min=-0.0044044 max=0.24459 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 LA 0.99 MK 1.05 NL 1.00 ! OV 1.01 PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 LA 1.00 MK 0.99 NL 1.02 ! OV 1.00 PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 LA 0.99 MK 0.99 NL 1.01 ! OV 0.99 PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 0.99 MK 0.98 NL 0.98 ! OV 0.95 PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.058359Jy sigma=1.208446 ! Fit after self-cal, rms=0.057666Jy sigma=1.198424 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.296 mas, bpa=-5.218 degrees ! Estimated noise=0.61637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220171 Jy ! Component: 100 - total flux cleaned = 0.000246556 Jy ! Component: 150 - total flux cleaned = 0.000268919 Jy ! Component: 200 - total flux cleaned = 0.000312347 Jy ! Total flux subtracted in 200 components = 0.000312347 Jy ! Clean residual min=-0.003553 max=0.003116 Jy/beam ! Clean residual mean=-0.000003 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.320093 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.320093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057640Jy sigma=1.197876 ! Fit after self-cal, rms=0.057644Jy sigma=1.197779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057644Jy sigma=1.197779 ! Fit after self-cal, rms=0.057390Jy sigma=1.192282 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.298 mas, bpa=-5.223 degrees ! Estimated noise=0.615967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.08089e-05 Jy ! Component: 100 - total flux cleaned = -4.22298e-05 Jy ! Component: 150 - total flux cleaned = -2.39294e-05 Jy ! Component: 200 - total flux cleaned = -6.48843e-06 Jy ! Total flux subtracted in 200 components = -6.48843e-06 Jy ! Clean residual min=-0.003424 max=0.003170 Jy/beam ! Clean residual mean=-0.000006 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.320086 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.320086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057375Jy sigma=1.191977 ! Fit after self-cal, rms=0.057372Jy sigma=1.191930 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.66326e-05 Jy ! Component: 100 - total flux cleaned = -1.49908e-05 Jy ! Component: 150 - total flux cleaned = 3.94584e-09 Jy ! Component: 200 - total flux cleaned = 2.75727e-05 Jy ! Total flux subtracted in 200 components = 2.75727e-05 Jy ! Clean residual min=-0.003405 max=0.003145 Jy/beam ! Clean residual mean=-0.000005 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.320114 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 0.320114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057365Jy sigma=1.191771 ! Fit after self-cal, rms=0.057363Jy sigma=1.191760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057363Jy sigma=1.191760 ! Fit after self-cal, rms=0.057343Jy sigma=1.191733 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.3 mas, bpa=-5.22 degrees ! Estimated noise=0.615577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178915 Jy ! Component: 100 - total flux cleaned = -0.000138729 Jy ! Component: 150 - total flux cleaned = -0.000151231 Jy ! Component: 200 - total flux cleaned = -0.000151183 Jy ! Total flux subtracted in 200 components = -0.000151183 Jy ! Clean residual min=-0.003323 max=0.003129 Jy/beam ! Clean residual mean=-0.000006 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.319963 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.319963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057336Jy sigma=1.191612 ! Fit after self-cal, rms=0.057335Jy sigma=1.191603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78076e-05 Jy ! Component: 100 - total flux cleaned = 4.15149e-05 Jy ! Component: 150 - total flux cleaned = 3.03501e-05 Jy ! Component: 200 - total flux cleaned = 3.03199e-05 Jy ! Total flux subtracted in 200 components = 3.03199e-05 Jy ! Clean residual min=-0.003324 max=0.003117 Jy/beam ! Clean residual mean=-0.000006 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.319993 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.319993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057331Jy sigma=1.191517 ! Fit after self-cal, rms=0.057330Jy sigma=1.191511 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057330Jy sigma=1.191511 ! Fit after self-cal, rms=0.057315Jy sigma=1.191497 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=17.32 mas, bpa=-5.532 degrees ! Estimated noise=0.836805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308725 Jy ! Component: 100 - total flux cleaned = -0.000241819 Jy ! Component: 150 - total flux cleaned = -0.000243046 Jy ! Component: 200 - total flux cleaned = -0.000243433 Jy ! Total flux subtracted in 200 components = -0.000243433 Jy ! Clean residual min=-0.004801 max=0.003910 Jy/beam ! Clean residual mean=-0.000012 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.31975 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 95 components and 0.31975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057319Jy sigma=1.191472 ! Fit after self-cal, rms=0.057316Jy sigma=1.191377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.07834e-05 Jy ! Component: 100 - total flux cleaned = 1.46718e-06 Jy ! Component: 150 - total flux cleaned = 2.96695e-06 Jy ! Component: 200 - total flux cleaned = 4.08723e-06 Jy ! Total flux subtracted in 200 components = 4.08723e-06 Jy ! Clean residual min=-0.004735 max=0.003862 Jy/beam ! Clean residual mean=-0.000012 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.319754 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 98 components and 0.319754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057324Jy sigma=1.191418 ! Fit after self-cal, rms=0.057324Jy sigma=1.191371 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.301 mas, bpa=-5.218 degrees ! Estimated noise=0.615315 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.742 x 7.301 at -5.218 degrees (North through East) ! Clean map min=-0.0032265 max=0.24447 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.252 mas, bmaj=6.408 mas, bpa=-2.827 degrees ! Estimated noise=0.951701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186372 Jy ! Component: 100 - total flux cleaned = 0.244075 Jy ! Component: 150 - total flux cleaned = 0.270101 Jy ! Component: 200 - total flux cleaned = 0.284265 Jy ! Total flux subtracted in 200 components = 0.284265 Jy ! Clean residual min=-0.006426 max=0.007354 Jy/beam ! Clean residual mean=0.000015 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.284265 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.284265 Jy ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.301 mas, bpa=-5.218 degrees ! Estimated noise=0.615315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135455 Jy ! Component: 100 - total flux cleaned = 0.0217766 Jy ! Component: 150 - total flux cleaned = 0.0268808 Jy ! Component: 200 - total flux cleaned = 0.0301446 Jy ! Total flux subtracted in 200 components = 0.0301446 Jy ! Clean residual min=-0.003846 max=0.003603 Jy/beam ! Clean residual mean=-0.000002 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.31441 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.31441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.31 mas, bmaj=17.32 mas, bpa=-5.532 degrees ! Estimated noise=0.836805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356674 Jy ! Component: 100 - total flux cleaned = 0.00507317 Jy ! Component: 150 - total flux cleaned = 0.00563705 Jy ! Component: 200 - total flux cleaned = 0.00563885 Jy ! Total flux subtracted in 200 components = 0.00563885 Jy ! Clean residual min=-0.004745 max=0.003853 Jy/beam ! Clean residual mean=-0.000013 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.320049 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.2474e-07 Jy ! Component: 100 - total flux cleaned = -7.09754e-07 Jy ! Component: 150 - total flux cleaned = -1.78521e-05 Jy ! Component: 200 - total flux cleaned = -1.75095e-05 Jy ! Total flux subtracted in 200 components = -1.75095e-05 Jy ! Clean residual min=-0.004672 max=0.003838 Jy/beam ! Clean residual mean=-0.000013 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.320031 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.320031 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.301 mas, bpa=-5.218 degrees ! Estimated noise=0.615315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502694 Jy ! Component: 100 - total flux cleaned = -0.000463908 Jy ! Component: 150 - total flux cleaned = -0.000396413 Jy ! Component: 200 - total flux cleaned = -0.000336762 Jy ! Total flux subtracted in 200 components = -0.000336762 Jy ! Clean residual min=-0.003559 max=0.003160 Jy/beam ! Clean residual mean=-0.000006 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.319695 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.319695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057389Jy sigma=1.192516 ! Fit after self-cal, rms=0.057382Jy sigma=1.192410 wmodel /J1007-1247_S_map.mod ! wmodel: Unable to open new model file: /J1007-1247_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J1007-1247_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.742 x 7.301 at -5.218 degrees (North through East) ! Clean map min=-0.0033202 max=0.24359 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1007-1247_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.243593 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000865894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0664 1.0664 2.13281 4.26561 8.53123 17.0625 34.1249 68.2498 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.243 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 281.319 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1007-1247_S_dfm.log closed on Fri May 20 00:02:30 2016