! Started logfile: /scr/pima/bg219a_uvs/J0939-1731_X_dfm.log on Fri May 20 00:02:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0939-1731_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0939-1731_X_uva.fits
! AN table 1: 57 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.844612 visibilities/baseline/integration-bin.
! Found source: J0939-1731
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 12132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0939-1731_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010603Jy  sigma=27.855028
! Fit after  self-cal, rms=0.880518Jy  sigma=24.213410
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5447 mas, bmaj=1.598 mas, bpa=-0.9397 degrees
! Estimated noise=0.490206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.089848 Jy
! Component: 100  -  total flux cleaned = 0.109781 Jy
! Total flux subtracted in 100 components = 0.109781 Jy
! Clean residual min=-0.005501 max=0.007182 Jy/beam
! Clean residual mean=-0.000008 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.109781 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.109781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054085Jy  sigma=1.455351
! Fit after  self-cal, rms=0.053963Jy  sigma=1.452069
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00757328 Jy
! Component: 100  -  total flux cleaned = 0.0120492 Jy
! Total flux subtracted in 100 components = 0.0120492 Jy
! Clean residual min=-0.004045 max=0.004903 Jy/beam
! Clean residual mean=-0.000004 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.121831 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.121831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051987Jy  sigma=1.391877
! Fit after  self-cal, rms=0.052012Jy  sigma=1.391647
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7191 mas, bmaj=1.871 mas, bpa=-1.986 degrees
! Estimated noise=0.238165 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00680146 Jy
! Component: 100  -  total flux cleaned = 0.0103283 Jy
! Component: 150  -  total flux cleaned = 0.0122306 Jy
! Component: 200  -  total flux cleaned = 0.0132758 Jy
! Total flux subtracted in 200 components = 0.0132758 Jy
! Clean residual min=-0.003981 max=0.006302 Jy/beam
! Clean residual mean=-0.000008 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.135106 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.135106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051178Jy  sigma=1.368130
! Fit after  self-cal, rms=0.051201Jy  sigma=1.367780
! Inverting map 
! Added new window around map position (1.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620883 Jy
! Component: 100  -  total flux cleaned = 0.00937168 Jy
! Component: 150  -  total flux cleaned = 0.0108116 Jy
! Component: 200  -  total flux cleaned = 0.0112943 Jy
! Total flux subtracted in 200 components = 0.0112943 Jy
! Clean residual min=-0.002724 max=0.004036 Jy/beam
! Clean residual mean=-0.000002 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.146401 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 54 components and 0.146401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050520Jy  sigma=1.345858
! Fit after  self-cal, rms=0.050416Jy  sigma=1.343154
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7191 x 1.871 at -1.986 degrees (North through East)
! Clean map  min=-0.0022502  max=0.11898 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.98     MK        1.01     NL        1.04     
!   OV        1.07     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.94     MK        0.99     NL        1.01     
!   OV        1.11     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.01     NL        1.01     
!   OV        1.06     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.98     MK        0.98     NL        1.02     
!   OV        1.04     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.97     MK        1.01     NL        1.05     
!   OV        1.05     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     LA        0.97     MK        1.00     NL        1.02     
!   OV        1.05     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.01     NL        1.03     
!   OV        1.04     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        0.98     NL        1.01     
!   OV        1.04     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        0.94     NL        1.04     
!   OV        1.02     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.97     MK        0.95     NL        1.01     
!   OV        1.04     PT        0.97     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.96     MK        0.98     NL        1.01     
!   OV        1.05     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.97     MK        0.95     NL        1.03     
!   OV        1.00     PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.050416Jy  sigma=1.343154
! Fit after  self-cal, rms=0.049695Jy  sigma=1.334172
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7175 mas, bmaj=1.872 mas, bpa=-2.114 degrees
! Estimated noise=0.237057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467619 Jy
! Component: 100  -  total flux cleaned = 0.00062409 Jy
! Component: 150  -  total flux cleaned = 0.000579385 Jy
! Component: 200  -  total flux cleaned = 0.000457684 Jy
! Total flux subtracted in 200 components = 0.000457684 Jy
! Clean residual min=-0.001920 max=0.002192 Jy/beam
! Clean residual mean=0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.146859 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 67 components and 0.146859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049660Jy  sigma=1.333242
! Fit after  self-cal, rms=0.049650Jy  sigma=1.333053
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049650Jy  sigma=1.333053
! Fit after  self-cal, rms=0.049304Jy  sigma=1.328355
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7162 mas, bmaj=1.868 mas, bpa=-2.04 degrees
! Estimated noise=0.236541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000370421 Jy
! Component: 100  -  total flux cleaned = 0.000373755 Jy
! Component: 150  -  total flux cleaned = 0.000374009 Jy
! Component: 200  -  total flux cleaned = 0.00034163 Jy
! Total flux subtracted in 200 components = 0.00034163 Jy
! Clean residual min=-0.001536 max=0.001518 Jy/beam
! Clean residual mean=0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.1472 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 79 components and 0.1472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049286Jy  sigma=1.327928
! Fit after  self-cal, rms=0.049288Jy  sigma=1.327868
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.91233e-05 Jy
! Component: 100  -  total flux cleaned = 2.61913e-05 Jy
! Component: 150  -  total flux cleaned = -1.16725e-05 Jy
! Component: 200  -  total flux cleaned = -3.47179e-05 Jy
! Total flux subtracted in 200 components = -3.47179e-05 Jy
! Clean residual min=-0.001525 max=0.001511 Jy/beam
! Clean residual mean=0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.147165 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.147165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049281Jy  sigma=1.327688
! Fit after  self-cal, rms=0.049281Jy  sigma=1.327674
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049281Jy  sigma=1.327674
! Fit after  self-cal, rms=0.049198Jy  sigma=1.327610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7152 mas, bmaj=1.867 mas, bpa=-2.038 degrees
! Estimated noise=0.236299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192369 Jy
! Component: 100  -  total flux cleaned = 0.000230494 Jy
! Component: 150  -  total flux cleaned = 0.000230424 Jy
! Component: 200  -  total flux cleaned = 0.00022082 Jy
! Total flux subtracted in 200 components = 0.00022082 Jy
! Clean residual min=-0.001509 max=0.001525 Jy/beam
! Clean residual mean=0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.147386 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 0.147386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049192Jy  sigma=1.327460
! Fit after  self-cal, rms=0.049191Jy  sigma=1.327452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 31.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138553 Jy
! Component: 100  -  total flux cleaned = 0.00211634 Jy
! Component: 150  -  total flux cleaned = 0.00249966 Jy
! Component: 200  -  total flux cleaned = 0.00278198 Jy
! Total flux subtracted in 200 components = 0.00278198 Jy
! Clean residual min=-0.001346 max=0.001081 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.150168 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.150168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049149Jy  sigma=1.326300
! Fit after  self-cal, rms=0.049147Jy  sigma=1.326237
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049147Jy  sigma=1.326237
! Fit after  self-cal, rms=0.049047Jy  sigma=1.326170
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=5.366 mas, bpa=-1.755 degrees
! Estimated noise=0.325106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000716711 Jy
! Component: 100  -  total flux cleaned = 0.00115906 Jy
! Component: 150  -  total flux cleaned = 0.00145262 Jy
! Component: 200  -  total flux cleaned = 0.00158998 Jy
! Total flux subtracted in 200 components = 0.00158998 Jy
! Clean residual min=-0.001119 max=0.001121 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.151758 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.151758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049043Jy  sigma=1.326064
! Fit after  self-cal, rms=0.049041Jy  sigma=1.326038
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302566 Jy
! Component: 100  -  total flux cleaned = 0.000456769 Jy
! Component: 150  -  total flux cleaned = 0.000479041 Jy
! Component: 200  -  total flux cleaned = 0.000504686 Jy
! Total flux subtracted in 200 components = 0.000504686 Jy
! Clean residual min=-0.001071 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.152263 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 125 components and 0.152263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049042Jy  sigma=1.326040
! Fit after  self-cal, rms=0.049041Jy  sigma=1.326032
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7149 mas, bmaj=1.867 mas, bpa=-2.058 degrees
! Estimated noise=0.235855 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7149 x 1.867 at -2.058 degrees (North through East)
! Clean map  min=-0.0011394  max=0.11833 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5411 mas, bmaj=1.596 mas, bpa=-1.042 degrees
! Estimated noise=0.484219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0886333 Jy
! Component: 100  -  total flux cleaned = 0.108898 Jy
! Component: 150  -  total flux cleaned = 0.117364 Jy
! Component: 200  -  total flux cleaned = 0.123006 Jy
! Total flux subtracted in 200 components = 0.123006 Jy
! Clean residual min=-0.003244 max=0.003709 Jy/beam
! Clean residual mean=-0.000005 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.123006 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.123006 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7149 mas, bmaj=1.867 mas, bpa=-2.058 degrees
! Estimated noise=0.235855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00772055 Jy
! Component: 100  -  total flux cleaned = 0.0120738 Jy
! Component: 150  -  total flux cleaned = 0.0150954 Jy
! Component: 200  -  total flux cleaned = 0.0173104 Jy
! Total flux subtracted in 200 components = 0.0173104 Jy
! Clean residual min=-0.001858 max=0.001756 Jy/beam
! Clean residual mean=-0.000004 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.140317 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 47 components and 0.140317 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=5.366 mas, bpa=-1.755 degrees
! Estimated noise=0.325106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286669 Jy
! Component: 100  -  total flux cleaned = 0.00470666 Jy
! Component: 150  -  total flux cleaned = 0.00607 Jy
! Component: 200  -  total flux cleaned = 0.00713186 Jy
! Total flux subtracted in 200 components = 0.00713186 Jy
! Clean residual min=-0.001377 max=0.001426 Jy/beam
! Clean residual mean=-0.000003 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.147448 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084516 Jy
! Component: 100  -  total flux cleaned = 0.00152149 Jy
! Component: 150  -  total flux cleaned = 0.002065 Jy
! Component: 200  -  total flux cleaned = 0.00250513 Jy
! Total flux subtracted in 200 components = 0.00250513 Jy
! Clean residual min=-0.001127 max=0.001191 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.149954 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 107 components and 0.149954 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7149 mas, bmaj=1.867 mas, bpa=-2.058 degrees
! Estimated noise=0.235855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327988 Jy
! Component: 100  -  total flux cleaned = 0.000624193 Jy
! Component: 150  -  total flux cleaned = 0.000756793 Jy
! Component: 200  -  total flux cleaned = 0.000891351 Jy
! Total flux subtracted in 200 components = 0.000891351 Jy
! Clean residual min=-0.001264 max=0.001162 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.150845 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 121 components and 0.150845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049057Jy  sigma=1.326495
! Fit after  self-cal, rms=0.049049Jy  sigma=1.326224
wmodel /J0939-1731_X_map.mod
! wmodel: Unable to open new model file: /J0939-1731_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0939-1731_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7149 x 1.867 at -2.058 degrees (North through East)
! Clean map  min=-0.0011078  max=0.11928 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0939-1731_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119275 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025864 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.650529 0.650529 1.30106 2.60212 5.20423 10.4085 20.8169 41.6339 83.2677
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  461.163 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0939-1731_X_dfm.log closed on Fri May 20 00:02:05 2016