! Started logfile: /scr/pima/bg219a_uvs/J0935-1939_S_dfm.log on Fri May 20 00:01:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0935-1939_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0935-1939_S_uva.fits
! AN table 1: 62 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.72427 visibilities/baseline/integration-bin.
! Found source: J0935-1939
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0935-1939_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012725Jy  sigma=22.702019
! Fit after  self-cal, rms=0.935268Jy  sigma=20.901751
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.515 mas, bmaj=6.028 mas, bpa=-6.124 degrees
! Estimated noise=0.834285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488479 Jy
! Component: 100  -  total flux cleaned = 0.0625599 Jy
! Total flux subtracted in 100 components = 0.0625599 Jy
! Clean residual min=-0.005975 max=0.006672 Jy/beam
! Clean residual mean=-0.000033 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.0625599 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0625599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059625Jy  sigma=1.282319
! Fit after  self-cal, rms=0.058552Jy  sigma=1.258089
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.074 mas, bmaj=7.281 mas, bpa=-6.46 degrees
! Estimated noise=0.557205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102855 Jy
! Component: 100  -  total flux cleaned = 0.015323 Jy
! Component: 150  -  total flux cleaned = 0.0180163 Jy
! Component: 200  -  total flux cleaned = 0.0194975 Jy
! Total flux subtracted in 200 components = 0.0194975 Jy
! Clean residual min=-0.003478 max=0.003891 Jy/beam
! Clean residual mean=-0.000021 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.0820573 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 39 components and 0.0820573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056916Jy  sigma=1.218158
! Fit after  self-cal, rms=0.056838Jy  sigma=1.216006
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.074 x 7.281 at -6.46 degrees (North through East)
! Clean map  min=-0.003614  max=0.06541 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     LA        0.92     MK        0.99     NL        1.01     
!   OV        1.01     PT        1.04     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.88     MK        1.11     NL        1.02     
!   OV        1.16     PT        0.94     SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        1.07     NL        0.96     
!   OV        1.09     PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     LA        0.96     MK        0.97     NL        1.05     
!   OV        1.06     PT        0.91     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.056838Jy  sigma=1.216006
! Fit after  self-cal, rms=0.057392Jy  sigma=1.207286
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.101 mas, bmaj=7.347 mas, bpa=-6.456 degrees
! Estimated noise=0.558799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207111 Jy
! Component: 100  -  total flux cleaned = -0.000177103 Jy
! Component: 150  -  total flux cleaned = -0.000118738 Jy
! Component: 200  -  total flux cleaned = -6.47157e-05 Jy
! Total flux subtracted in 200 components = -6.47157e-05 Jy
! Clean residual min=-0.003047 max=0.003453 Jy/beam
! Clean residual mean=-0.000013 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.0819926 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 43 components and 0.0819926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057360Jy  sigma=1.206639
! Fit after  self-cal, rms=0.057438Jy  sigma=1.205775
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057438Jy  sigma=1.205775
! Fit after  self-cal, rms=0.058052Jy  sigma=1.202322
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.323 mas, bpa=-6.561 degrees
! Estimated noise=0.56062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256018 Jy
! Component: 100  -  total flux cleaned = -0.000222519 Jy
! Component: 150  -  total flux cleaned = -0.00020704 Jy
! Component: 200  -  total flux cleaned = -0.000207575 Jy
! Total flux subtracted in 200 components = -0.000207575 Jy
! Clean residual min=-0.002969 max=0.003568 Jy/beam
! Clean residual mean=-0.000012 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.0817851 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 0.081785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058042Jy  sigma=1.202154
! Fit after  self-cal, rms=0.058071Jy  sigma=1.201933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, -18.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319004 Jy
! Component: 100  -  total flux cleaned = 0.00402848 Jy
! Component: 150  -  total flux cleaned = 0.00434038 Jy
! Component: 200  -  total flux cleaned = 0.0045986 Jy
! Total flux subtracted in 200 components = 0.0045986 Jy
! Clean residual min=-0.002855 max=0.002237 Jy/beam
! Clean residual mean=-0.000007 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.0863836 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.0863837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057895Jy  sigma=1.198197
! Fit after  self-cal, rms=0.057842Jy  sigma=1.197597
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057842Jy  sigma=1.197597
! Fit after  self-cal, rms=0.057791Jy  sigma=1.197367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.123 mas, bmaj=7.336 mas, bpa=-6.664 degrees
! Estimated noise=0.558167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000958288 Jy
! Component: 100  -  total flux cleaned = 0.000895914 Jy
! Component: 150  -  total flux cleaned = 0.000868902 Jy
! Component: 200  -  total flux cleaned = 0.000914638 Jy
! Total flux subtracted in 200 components = 0.000914638 Jy
! Clean residual min=-0.002791 max=0.002183 Jy/beam
! Clean residual mean=-0.000006 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.0872983 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.0872983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057750Jy  sigma=1.196660
! Fit after  self-cal, rms=0.057743Jy  sigma=1.196542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151257 Jy
! Component: 100  -  total flux cleaned = 0.000150991 Jy
! Component: 150  -  total flux cleaned = 0.000209775 Jy
! Component: 200  -  total flux cleaned = 0.000227846 Jy
! Total flux subtracted in 200 components = 0.000227846 Jy
! Clean residual min=-0.002767 max=0.002225 Jy/beam
! Clean residual mean=-0.000006 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.0875261 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 91 components and 0.0875261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057724Jy  sigma=1.196282
! Fit after  self-cal, rms=0.057717Jy  sigma=1.196253
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057717Jy  sigma=1.196253
! Fit after  self-cal, rms=0.057773Jy  sigma=1.196199
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.698 mas, bmaj=19.49 mas, bpa=-3.435 degrees
! Estimated noise=0.70642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18449e-05 Jy
! Component: 100  -  total flux cleaned = 0.000150213 Jy
! Component: 150  -  total flux cleaned = 0.000162427 Jy
! Component: 200  -  total flux cleaned = 0.00018404 Jy
! Total flux subtracted in 200 components = 0.00018404 Jy
! Clean residual min=-0.002475 max=0.001778 Jy/beam
! Clean residual mean=-0.000015 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0877102 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.0877102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057774Jy  sigma=1.196113
! Fit after  self-cal, rms=0.057776Jy  sigma=1.196069
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.57829e-05 Jy
! Component: 100  -  total flux cleaned = -3.18859e-06 Jy
! Component: 150  -  total flux cleaned = 7.67731e-06 Jy
! Component: 200  -  total flux cleaned = 2.65971e-05 Jy
! Total flux subtracted in 200 components = 2.65971e-05 Jy
! Clean residual min=-0.002450 max=0.001784 Jy/beam
! Clean residual mean=-0.000015 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0877368 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 98 components and 0.0877368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057777Jy  sigma=1.196051
! Fit after  self-cal, rms=0.057776Jy  sigma=1.196022
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.124 mas, bmaj=7.339 mas, bpa=-6.733 degrees
! Estimated noise=0.557491 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.124 x 7.339 at -6.733 degrees (North through East)
! Clean map  min=-0.0026244  max=0.066406 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.539 mas, bmaj=6.027 mas, bpa=-6.428 degrees
! Estimated noise=0.845809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0493843 Jy
! Component: 100  -  total flux cleaned = 0.0633406 Jy
! Component: 150  -  total flux cleaned = 0.070112 Jy
! Component: 200  -  total flux cleaned = 0.0743284 Jy
! Total flux subtracted in 200 components = 0.0743284 Jy
! Clean residual min=-0.005020 max=0.004198 Jy/beam
! Clean residual mean=-0.000016 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.0743284 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0743284 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.124 mas, bmaj=7.339 mas, bpa=-6.733 degrees
! Estimated noise=0.557491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051763 Jy
! Component: 100  -  total flux cleaned = 0.00814561 Jy
! Component: 150  -  total flux cleaned = 0.0102213 Jy
! Component: 200  -  total flux cleaned = 0.0115615 Jy
! Total flux subtracted in 200 components = 0.0115615 Jy
! Clean residual min=-0.002897 max=0.002285 Jy/beam
! Clean residual mean=-0.000009 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.0858899 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 49 components and 0.0858899 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.698 mas, bmaj=19.49 mas, bpa=-3.435 degrees
! Estimated noise=0.70642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888355 Jy
! Component: 100  -  total flux cleaned = 0.00129677 Jy
! Component: 150  -  total flux cleaned = 0.00167492 Jy
! Component: 200  -  total flux cleaned = 0.00196581 Jy
! Total flux subtracted in 200 components = 0.00196581 Jy
! Clean residual min=-0.002491 max=0.001766 Jy/beam
! Clean residual mean=-0.000014 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0878557 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169759 Jy
! Component: 100  -  total flux cleaned = 0.000273799 Jy
! Component: 150  -  total flux cleaned = 0.000334833 Jy
! Component: 200  -  total flux cleaned = 0.000403107 Jy
! Total flux subtracted in 200 components = 0.000403107 Jy
! Clean residual min=-0.002402 max=0.001831 Jy/beam
! Clean residual mean=-0.000013 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.0882588 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.0882588 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.124 mas, bmaj=7.339 mas, bpa=-6.733 degrees
! Estimated noise=0.557491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201725 Jy
! Component: 100  -  total flux cleaned = 0.000204347 Jy
! Component: 150  -  total flux cleaned = 0.000172272 Jy
! Component: 200  -  total flux cleaned = 0.000142866 Jy
! Total flux subtracted in 200 components = 0.000142866 Jy
! Clean residual min=-0.002688 max=0.002340 Jy/beam
! Clean residual mean=-0.000005 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.0884017 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.0884017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057778Jy  sigma=1.195836
! Fit after  self-cal, rms=0.057754Jy  sigma=1.195592
wmodel /J0935-1939_S_map.mod
! wmodel: Unable to open new model file: /J0935-1939_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0935-1939_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.124 x 7.339 at -6.733 degrees (North through East)
! Clean map  min=-0.0025535  max=0.066215 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0935-1939_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0662147 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000543036 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.46034 2.46034 4.92068 9.84137 19.6827 39.3655 78.7309
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  121.934 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0935-1939_S_dfm.log closed on Fri May 20 00:01:53 2016