! Started logfile: /scr/pima/bg219a_uvs/J0935+3633_S_dfm.log on Fri May 20 00:01:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0935+3633_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0935+3633_S_uva.fits
! AN table 1: 26 integrations on 15 of 15 possible baselines.
! AN table 2: 26 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.95641 visibilities/baseline/integration-bin.
! Found source: J0935+3633
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2984 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0935+3633_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 12 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.038280Jy  sigma=26.140264
! Fit after  self-cal, rms=0.763460Jy  sigma=19.078878
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=3.984 mas, bpa=19.5 degrees
! Estimated noise=0.866256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187128 Jy
! Component: 100  -  total flux cleaned = 0.24883 Jy
! Total flux subtracted in 100 components = 0.24883 Jy
! Clean residual min=-0.019370 max=0.037252 Jy/beam
! Clean residual mean=-0.000011 rms=0.005441 Jy/beam
! Combined flux in latest and established models = 0.24883 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.24883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072620Jy  sigma=1.779028
! Fit after  self-cal, rms=0.071600Jy  sigma=1.757495
! Inverting map 
! Added new window around map position (-4, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0346016 Jy
! Component: 100  -  total flux cleaned = 0.0490307 Jy
! Total flux subtracted in 100 components = 0.0490307 Jy
! Clean residual min=-0.010857 max=0.013570 Jy/beam
! Clean residual mean=-0.000007 rms=0.002527 Jy/beam
! Combined flux in latest and established models = 0.297861 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.297861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055487Jy  sigma=1.333150
! Fit after  self-cal, rms=0.054079Jy  sigma=1.298525
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.192 mas, bmaj=4.68 mas, bpa=7.125 degrees
! Estimated noise=0.544573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00978137 Jy
! Component: 100  -  total flux cleaned = 0.0108971 Jy
! Component: 150  -  total flux cleaned = 0.0108953 Jy
! Component: 200  -  total flux cleaned = 0.0110342 Jy
! Total flux subtracted in 200 components = 0.0110342 Jy
! Clean residual min=-0.006761 max=0.006404 Jy/beam
! Clean residual mean=-0.000016 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.308895 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.308895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051723Jy  sigma=1.239728
! Fit after  self-cal, rms=0.051417Jy  sigma=1.233371
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.192 x 4.68 at 7.125 degrees (North through East)
! Clean map  min=-0.0066222  max=0.20677 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        1.01     MK        0.98     NL        0.97     
!   OV        0.98     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00     MK        1.04     NL        0.98     OV        1.00     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        0.98     MK        0.99     NL        0.96     
!   OV        1.00     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.97     MK        1.05     NL        1.02     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        1.02     MK        0.99     NL        0.96     
!   OV        0.98     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.02     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.99     MK        1.02     NL        0.96     
!   OV        0.97     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        1.07     NL        0.99     OV        1.02     
!   PT        1.00     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.051417Jy  sigma=1.233371
! Fit after  self-cal, rms=0.050904Jy  sigma=1.216594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.193 mas, bmaj=4.647 mas, bpa=7.056 degrees
! Estimated noise=0.543073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197341 Jy
! Component: 100  -  total flux cleaned = -0.000170174 Jy
! Component: 150  -  total flux cleaned = -0.000168873 Jy
! Component: 200  -  total flux cleaned = -0.000169028 Jy
! Total flux subtracted in 200 components = -0.000169028 Jy
! Clean residual min=-0.004588 max=0.003536 Jy/beam
! Clean residual mean=0.000005 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.308726 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.308726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050364Jy  sigma=1.204513
! Fit after  self-cal, rms=0.050308Jy  sigma=1.203390
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050308Jy  sigma=1.203390
! Fit after  self-cal, rms=0.050149Jy  sigma=1.202826
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.187 mas, bmaj=4.636 mas, bpa=6.73 degrees
! Estimated noise=0.542059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140896 Jy
! Component: 100  -  total flux cleaned = 0.000142157 Jy
! Component: 150  -  total flux cleaned = 7.4258e-05 Jy
! Component: 200  -  total flux cleaned = 1.16782e-05 Jy
! Total flux subtracted in 200 components = 1.16782e-05 Jy
! Clean residual min=-0.004002 max=0.002963 Jy/beam
! Clean residual mean=0.000005 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.308738 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.308738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049893Jy  sigma=1.197296
! Fit after  self-cal, rms=0.049858Jy  sigma=1.196688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.36411e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110177 Jy
! Component: 150  -  total flux cleaned = -0.00026581 Jy
! Component: 200  -  total flux cleaned = -0.000266761 Jy
! Total flux subtracted in 200 components = -0.000266761 Jy
! Clean residual min=-0.003694 max=0.002656 Jy/beam
! Clean residual mean=0.000005 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.308471 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 43 components and 0.308471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049722Jy  sigma=1.193764
! Fit after  self-cal, rms=0.049703Jy  sigma=1.193381
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049703Jy  sigma=1.193381
! Fit after  self-cal, rms=0.049561Jy  sigma=1.193144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=4.634 mas, bpa=6.5 degrees
! Estimated noise=0.541178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.79006e-05 Jy
! Component: 100  -  total flux cleaned = 1.59974e-05 Jy
! Component: 150  -  total flux cleaned = 1.68526e-05 Jy
! Component: 200  -  total flux cleaned = -2.19353e-05 Jy
! Total flux subtracted in 200 components = -2.19353e-05 Jy
! Clean residual min=-0.003372 max=0.002406 Jy/beam
! Clean residual mean=0.000004 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.308449 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 0.308449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049467Jy  sigma=1.191235
! Fit after  self-cal, rms=0.049453Jy  sigma=1.190935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.17812e-06 Jy
! Component: 100  -  total flux cleaned = -0.000116397 Jy
! Component: 150  -  total flux cleaned = -0.000182436 Jy
! Component: 200  -  total flux cleaned = -0.00018247 Jy
! Total flux subtracted in 200 components = -0.00018247 Jy
! Clean residual min=-0.003243 max=0.002296 Jy/beam
! Clean residual mean=0.000004 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.308267 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.308267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049396Jy  sigma=1.189723
! Fit after  self-cal, rms=0.049388Jy  sigma=1.189526
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049388Jy  sigma=1.189526
! Fit after  self-cal, rms=0.049334Jy  sigma=1.189443
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.587 mas, bmaj=11.22 mas, bpa=20.8 degrees
! Estimated noise=0.669556 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.82639e-05 Jy
! Component: 100  -  total flux cleaned = 9.31339e-05 Jy
! Component: 150  -  total flux cleaned = 0.000162395 Jy
! Component: 200  -  total flux cleaned = 0.000218365 Jy
! Total flux subtracted in 200 components = 0.000218365 Jy
! Clean residual min=-0.002394 max=0.002248 Jy/beam
! Clean residual mean=0.000007 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.308485 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 61 components and 0.308485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049307Jy  sigma=1.188921
! Fit after  self-cal, rms=0.049296Jy  sigma=1.188650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.6397e-05 Jy
! Component: 100  -  total flux cleaned = -4.58359e-05 Jy
! Component: 150  -  total flux cleaned = 9.73262e-06 Jy
! Component: 200  -  total flux cleaned = 5.61999e-05 Jy
! Total flux subtracted in 200 components = 5.61999e-05 Jy
! Clean residual min=-0.002363 max=0.002226 Jy/beam
! Clean residual mean=0.000007 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.308541 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.308541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049285Jy  sigma=1.188437
! Fit after  self-cal, rms=0.049276Jy  sigma=1.188211
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=4.634 mas, bpa=6.053 degrees
! Estimated noise=0.540843 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.183 x 4.634 at 6.053 degrees (North through East)
! Clean map  min=-0.0029659  max=0.20425 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.448 mas, bmaj=3.948 mas, bpa=19.68 degrees
! Estimated noise=0.857721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189102 Jy
! Component: 100  -  total flux cleaned = 0.252105 Jy
! Component: 150  -  total flux cleaned = 0.278249 Jy
! Component: 200  -  total flux cleaned = 0.291016 Jy
! Total flux subtracted in 200 components = 0.291016 Jy
! Clean residual min=-0.005581 max=0.007871 Jy/beam
! Clean residual mean=0.000007 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 0.291016 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.291016 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=4.634 mas, bpa=6.053 degrees
! Estimated noise=0.540843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00926892 Jy
! Component: 100  -  total flux cleaned = 0.0137435 Jy
! Component: 150  -  total flux cleaned = 0.0152671 Jy
! Component: 200  -  total flux cleaned = 0.0159584 Jy
! Total flux subtracted in 200 components = 0.0159584 Jy
! Clean residual min=-0.003307 max=0.002893 Jy/beam
! Clean residual mean=0.000004 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.306974 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 51 components and 0.306974 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.587 mas, bmaj=11.22 mas, bpa=20.8 degrees
! Estimated noise=0.669556 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077579 Jy
! Component: 100  -  total flux cleaned = 0.000773415 Jy
! Component: 150  -  total flux cleaned = 0.000865537 Jy
! Component: 200  -  total flux cleaned = 0.000940671 Jy
! Total flux subtracted in 200 components = 0.000940671 Jy
! Clean residual min=-0.002438 max=0.002239 Jy/beam
! Clean residual mean=0.000007 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.307915 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.19882e-05 Jy
! Component: 100  -  total flux cleaned = 0.000135925 Jy
! Component: 150  -  total flux cleaned = 0.00017675 Jy
! Component: 200  -  total flux cleaned = 0.000210602 Jy
! Total flux subtracted in 200 components = 0.000210602 Jy
! Clean residual min=-0.002447 max=0.002230 Jy/beam
! Clean residual mean=0.000007 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.308126 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 75 components and 0.308126 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.183 mas, bmaj=4.634 mas, bpa=6.053 degrees
! Estimated noise=0.540843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000888628 Jy
! Component: 100  -  total flux cleaned = -0.00106533 Jy
! Component: 150  -  total flux cleaned = -0.00112099 Jy
! Component: 200  -  total flux cleaned = -0.00112351 Jy
! Total flux subtracted in 200 components = -0.00112351 Jy
! Clean residual min=-0.003033 max=0.002036 Jy/beam
! Clean residual mean=0.000002 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.307002 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.307002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049316Jy  sigma=1.188776
! Fit after  self-cal, rms=0.049278Jy  sigma=1.187987
wmodel /J0935+3633_S_map.mod
! wmodel: Unable to open new model file: /J0935+3633_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0935+3633_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.183 x 4.634 at 6.053 degrees (North through East)
! Clean map  min=-0.0027506  max=0.20241 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0935+3633_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.202413 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00058514 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.867245 0.867245 1.73449 3.46898 6.93796 13.8759 27.7518 55.5037
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.202 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  345.922 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0935+3633_S_dfm.log closed on Fri May 20 00:01:46 2016