! Started logfile: /scr/pima/bg219a_uvs/J0929-1820_X_dfm.log on Fri May 20 00:01:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0929-1820_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0929-1820_X_uva.fits
! AN table 1: 52 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.825092 visibilities/baseline/integration-bin.
! Found source: J0929-1820
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 10812 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0929-1820_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014935Jy  sigma=27.463691
! Fit after  self-cal, rms=0.874859Jy  sigma=23.499821
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5465 mas, bmaj=1.596 mas, bpa=-1.597 degrees
! Estimated noise=0.453882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.089214 Jy
! Component: 100  -  total flux cleaned = 0.11723 Jy
! Total flux subtracted in 100 components = 0.11723 Jy
! Clean residual min=-0.011206 max=0.022322 Jy/beam
! Clean residual mean=-0.000008 rms=0.002790 Jy/beam
! Combined flux in latest and established models = 0.11723 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.11723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069286Jy  sigma=1.864833
! Fit after  self-cal, rms=0.069002Jy  sigma=1.859212
! Inverting map 
! Added new window around map position (1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0216312 Jy
! Component: 100  -  total flux cleaned = 0.0345481 Jy
! Total flux subtracted in 100 components = 0.0345481 Jy
! Clean residual min=-0.006729 max=0.010267 Jy/beam
! Clean residual mean=-0.000004 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 0.151778 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.151778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058423Jy  sigma=1.546326
! Fit after  self-cal, rms=0.057811Jy  sigma=1.529269
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101318 Jy
! Component: 100  -  total flux cleaned = 0.0171117 Jy
! Total flux subtracted in 100 components = 0.0171117 Jy
! Clean residual min=-0.004601 max=0.005876 Jy/beam
! Clean residual mean=-0.000003 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.16889 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.16889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054677Jy  sigma=1.434294
! Fit after  self-cal, rms=0.054609Jy  sigma=1.431771
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7074 mas, bmaj=1.845 mas, bpa=-2.062 degrees
! Estimated noise=0.264957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00929496 Jy
! Component: 100  -  total flux cleaned = 0.0146121 Jy
! Component: 150  -  total flux cleaned = 0.0179885 Jy
! Component: 200  -  total flux cleaned = 0.0202197 Jy
! Total flux subtracted in 200 components = 0.0202197 Jy
! Clean residual min=-0.002827 max=0.003653 Jy/beam
! Clean residual mean=-0.000005 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.189109 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.189109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053052Jy  sigma=1.383935
! Fit after  self-cal, rms=0.053025Jy  sigma=1.382428
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7074 x 1.845 at -2.062 degrees (North through East)
! Clean map  min=-0.0027156  max=0.12719 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.96     MK        0.99     NL        1.02     
!   OV        1.00     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.96     MK        0.96     NL        1.01     
!   OV        1.04     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.96     MK        1.02     NL        1.02     
!   OV        1.02     PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        1.00     NL        1.03     
!   OV        1.00     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.95     MK        0.95     NL        1.02     
!   OV        1.02     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.98     MK        0.98     NL        1.03     
!   OV        1.04     PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        0.97     NL        1.01     
!   OV        1.01     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.97     MK        0.98     NL        0.99     
!   OV        0.99     PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        0.99     NL        1.00     
!   OV        0.99     PT        1.01     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        1.00     NL        1.04     
!   OV        1.01     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.98     MK        1.00     NL        1.02     
!   OV        1.09     PT        0.97     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.96     MK        1.02     NL        1.04     
!   OV        1.04     PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.053025Jy  sigma=1.382428
! Fit after  self-cal, rms=0.052396Jy  sigma=1.375441
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.707 mas, bmaj=1.848 mas, bpa=-2.192 degrees
! Estimated noise=0.262774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111622 Jy
! Component: 100  -  total flux cleaned = 0.0011898 Jy
! Component: 150  -  total flux cleaned = 0.00113922 Jy
! Component: 200  -  total flux cleaned = 0.0011794 Jy
! Total flux subtracted in 200 components = 0.0011794 Jy
! Clean residual min=-0.002419 max=0.002080 Jy/beam
! Clean residual mean=0.000002 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.190289 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.190289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052239Jy  sigma=1.371248
! Fit after  self-cal, rms=0.052223Jy  sigma=1.370985
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052223Jy  sigma=1.370985
! Fit after  self-cal, rms=0.051945Jy  sigma=1.367988
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7063 mas, bmaj=1.841 mas, bpa=-2.21 degrees
! Estimated noise=0.261797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000456381 Jy
! Component: 100  -  total flux cleaned = 0.000523487 Jy
! Component: 150  -  total flux cleaned = 0.000551813 Jy
! Component: 200  -  total flux cleaned = 0.000506855 Jy
! Total flux subtracted in 200 components = 0.000506855 Jy
! Clean residual min=-0.002085 max=0.001774 Jy/beam
! Clean residual mean=0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.190796 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.190796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051914Jy  sigma=1.367099
! Fit after  self-cal, rms=0.051914Jy  sigma=1.366950
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126377 Jy
! Component: 100  -  total flux cleaned = 0.000103451 Jy
! Component: 150  -  total flux cleaned = 8.32327e-05 Jy
! Component: 200  -  total flux cleaned = 6.50702e-05 Jy
! Total flux subtracted in 200 components = 6.50702e-05 Jy
! Clean residual min=-0.001971 max=0.001616 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.190861 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 51 components and 0.190861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051896Jy  sigma=1.366445
! Fit after  self-cal, rms=0.051893Jy  sigma=1.366375
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051893Jy  sigma=1.366375
! Fit after  self-cal, rms=0.051845Jy  sigma=1.366291
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7065 mas, bmaj=1.841 mas, bpa=-2.184 degrees
! Estimated noise=0.261429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.4462e-05 Jy
! Component: 100  -  total flux cleaned = 0.000149389 Jy
! Component: 150  -  total flux cleaned = 0.000132041 Jy
! Component: 200  -  total flux cleaned = 0.000116305 Jy
! Total flux subtracted in 200 components = 0.000116305 Jy
! Clean residual min=-0.001776 max=0.001540 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.190977 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.190977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051831Jy  sigma=1.365874
! Fit after  self-cal, rms=0.051830Jy  sigma=1.365813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.19914e-05 Jy
! Component: 100  -  total flux cleaned = 2.64615e-05 Jy
! Component: 150  -  total flux cleaned = 2.69829e-05 Jy
! Component: 200  -  total flux cleaned = 1.41366e-05 Jy
! Total flux subtracted in 200 components = 1.41366e-05 Jy
! Clean residual min=-0.001696 max=0.001481 Jy/beam
! Clean residual mean=0.000001 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.190991 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.190991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051822Jy  sigma=1.365548
! Fit after  self-cal, rms=0.051820Jy  sigma=1.365511
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051820Jy  sigma=1.365511
! Fit after  self-cal, rms=0.051825Jy  sigma=1.365464
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=5.337 mas, bpa=-2.313 degrees
! Estimated noise=0.366282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221827 Jy
! Component: 100  -  total flux cleaned = -0.000234314 Jy
! Component: 150  -  total flux cleaned = -0.000245428 Jy
! Component: 200  -  total flux cleaned = -0.000256347 Jy
! Total flux subtracted in 200 components = -0.000256347 Jy
! Clean residual min=-0.001726 max=0.001330 Jy/beam
! Clean residual mean=0.000002 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.190735 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.190735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051825Jy  sigma=1.365436
! Fit after  self-cal, rms=0.051825Jy  sigma=1.365421
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.53631e-05 Jy
! Component: 100  -  total flux cleaned = -4.54776e-05 Jy
! Component: 150  -  total flux cleaned = -6.45428e-05 Jy
! Component: 200  -  total flux cleaned = -6.43435e-05 Jy
! Total flux subtracted in 200 components = -6.43435e-05 Jy
! Clean residual min=-0.001644 max=0.001305 Jy/beam
! Clean residual mean=0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.19067 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 68 components and 0.19067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051825Jy  sigma=1.365409
! Fit after  self-cal, rms=0.051824Jy  sigma=1.365397
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7068 mas, bmaj=1.841 mas, bpa=-2.185 degrees
! Estimated noise=0.261274 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7068 x 1.841 at -2.185 degrees (North through East)
! Clean map  min=-0.0023726  max=0.1257 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5459 mas, bmaj=1.591 mas, bpa=-1.679 degrees
! Estimated noise=0.448326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0882737 Jy
! Component: 100  -  total flux cleaned = 0.120763 Jy
! Component: 150  -  total flux cleaned = 0.139601 Jy
! Component: 200  -  total flux cleaned = 0.152097 Jy
! Total flux subtracted in 200 components = 0.152097 Jy
! Clean residual min=-0.005298 max=0.007056 Jy/beam
! Clean residual mean=-0.000003 rms=0.001373 Jy/beam
! Combined flux in latest and established models = 0.152097 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.152097 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7068 mas, bmaj=1.841 mas, bpa=-2.185 degrees
! Estimated noise=0.261274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156878 Jy
! Component: 100  -  total flux cleaned = 0.0244104 Jy
! Component: 150  -  total flux cleaned = 0.0295038 Jy
! Component: 200  -  total flux cleaned = 0.0326034 Jy
! Total flux subtracted in 200 components = 0.0326034 Jy
! Clean residual min=-0.002201 max=0.002114 Jy/beam
! Clean residual mean=-0.000002 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.1847 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 0.1847 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=5.337 mas, bpa=-2.313 degrees
! Estimated noise=0.366282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337378 Jy
! Component: 100  -  total flux cleaned = 0.00485888 Jy
! Component: 150  -  total flux cleaned = 0.00557353 Jy
! Component: 200  -  total flux cleaned = 0.00570454 Jy
! Total flux subtracted in 200 components = 0.00570454 Jy
! Clean residual min=-0.001751 max=0.001498 Jy/beam
! Clean residual mean=0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.190405 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.58112e-05 Jy
! Component: 100  -  total flux cleaned = 5.60759e-05 Jy
! Component: 150  -  total flux cleaned = 5.57461e-05 Jy
! Component: 200  -  total flux cleaned = 4.05681e-05 Jy
! Total flux subtracted in 200 components = 4.05681e-05 Jy
! Clean residual min=-0.001635 max=0.001384 Jy/beam
! Clean residual mean=0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.190445 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 78 components and 0.190445 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7068 mas, bmaj=1.841 mas, bpa=-2.185 degrees
! Estimated noise=0.261274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271185 Jy
! Component: 100  -  total flux cleaned = 0.00040342 Jy
! Component: 150  -  total flux cleaned = 0.000402528 Jy
! Component: 200  -  total flux cleaned = 0.000427705 Jy
! Total flux subtracted in 200 components = 0.000427705 Jy
! Clean residual min=-0.001672 max=0.001506 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.190873 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.190873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051833Jy  sigma=1.365599
! Fit after  self-cal, rms=0.051826Jy  sigma=1.365283
wmodel /J0929-1820_X_map.mod
! wmodel: Unable to open new model file: /J0929-1820_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0929-1820_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7068 x 1.841 at -2.185 degrees (North through East)
! Clean map  min=-0.0015865  max=0.1252 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0929-1820_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125198 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340173 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.815125 0.815125 1.63025 3.2605 6.521 13.042 26.084 52.168
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  368.041 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0929-1820_X_dfm.log closed on Fri May 20 00:01:20 2016