! Started logfile: /scr/pima/bg219a_uvs/J0925+3612_S_dfm.log on Fri May 20 00:01:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0925+3612_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0925+3612_S_uva.fits
! AN table 1: 21 integrations on 15 of 15 possible baselines.
! AN table 2: 20 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.985366 visibilities/baseline/integration-bin.
! Found source: J0925+3612
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2424 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0925+3612_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029816Jy  sigma=26.077560
! Fit after  self-cal, rms=0.758188Jy  sigma=19.256846
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=3.857 mas, bpa=-4.279 degrees
! Estimated noise=0.746339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189129 Jy
! Component: 100  -  total flux cleaned = 0.230386 Jy
! Total flux subtracted in 100 components = 0.230386 Jy
! Clean residual min=-0.007861 max=0.011667 Jy/beam
! Clean residual mean=-0.000009 rms=0.002156 Jy/beam
! Combined flux in latest and established models = 0.230386 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.230386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055739Jy  sigma=1.336559
! Fit after  self-cal, rms=0.055743Jy  sigma=1.336477
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.283 mas, bmaj=4.801 mas, bpa=8.208 degrees
! Estimated noise=0.583472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120458 Jy
! Component: 100  -  total flux cleaned = 0.0170544 Jy
! Component: 150  -  total flux cleaned = 0.0181577 Jy
! Component: 200  -  total flux cleaned = 0.0181588 Jy
! Total flux subtracted in 200 components = 0.0181588 Jy
! Clean residual min=-0.005611 max=0.010888 Jy/beam
! Clean residual mean=-0.000023 rms=0.001908 Jy/beam
! Combined flux in latest and established models = 0.248545 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.248545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053307Jy  sigma=1.275757
! Fit after  self-cal, rms=0.053281Jy  sigma=1.275306
! Inverting map 
! Added new window around map position (-11, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00994467 Jy
! Component: 100  -  total flux cleaned = 0.014381 Jy
! Component: 150  -  total flux cleaned = 0.0156559 Jy
! Component: 200  -  total flux cleaned = 0.0160982 Jy
! Total flux subtracted in 200 components = 0.0160982 Jy
! Clean residual min=-0.004045 max=0.004902 Jy/beam
! Clean residual mean=-0.000023 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.264643 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.264643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051534Jy  sigma=1.228887
! Fit after  self-cal, rms=0.051427Jy  sigma=1.224889
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.283 x 4.801 at 8.208 degrees (North through East)
! Clean map  min=-0.0038301  max=0.238 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        1.00     MK        0.98     NL        0.99     
!   OV        1.04     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00     MK        1.17     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        1.00     NL        0.99     
!   OV        1.00     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00     MK        1.01     NL        0.98     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.02     MK        0.97     NL        0.99     
!   OV        1.00     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.00     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.99     MK        0.97     NL        1.01     
!   OV        1.02     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.97     MK        1.01     NL        0.97     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.051427Jy  sigma=1.224889
! Fit after  self-cal, rms=0.050684Jy  sigma=1.200193
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.265 mas, bmaj=4.772 mas, bpa=8.448 degrees
! Estimated noise=0.580834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00058111 Jy
! Component: 100  -  total flux cleaned = 0.00095992 Jy
! Component: 150  -  total flux cleaned = 0.00091419 Jy
! Component: 200  -  total flux cleaned = 0.000951229 Jy
! Total flux subtracted in 200 components = 0.000951229 Jy
! Clean residual min=-0.003098 max=0.002517 Jy/beam
! Clean residual mean=-0.000013 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.265594 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.265594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050527Jy  sigma=1.196175
! Fit after  self-cal, rms=0.050532Jy  sigma=1.195867
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050532Jy  sigma=1.195867
! Fit after  self-cal, rms=0.050600Jy  sigma=1.195606
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.266 mas, bmaj=4.769 mas, bpa=8.108 degrees
! Estimated noise=0.580814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000437101 Jy
! Component: 100  -  total flux cleaned = 0.000505956 Jy
! Component: 150  -  total flux cleaned = 0.000504509 Jy
! Component: 200  -  total flux cleaned = 0.000527766 Jy
! Total flux subtracted in 200 components = 0.000527766 Jy
! Clean residual min=-0.002843 max=0.002256 Jy/beam
! Clean residual mean=-0.000007 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.266122 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.266122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050559Jy  sigma=1.194550
! Fit after  self-cal, rms=0.050557Jy  sigma=1.194481
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183612 Jy
! Component: 100  -  total flux cleaned = 0.000204104 Jy
! Component: 150  -  total flux cleaned = 0.000203825 Jy
! Component: 200  -  total flux cleaned = 0.000203823 Jy
! Total flux subtracted in 200 components = 0.000203823 Jy
! Clean residual min=-0.002724 max=0.002244 Jy/beam
! Clean residual mean=-0.000007 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.266326 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.266326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050540Jy  sigma=1.194060
! Fit after  self-cal, rms=0.050539Jy  sigma=1.194031
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050539Jy  sigma=1.194031
! Fit after  self-cal, rms=0.050566Jy  sigma=1.193971
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.267 mas, bmaj=4.768 mas, bpa=8.089 degrees
! Estimated noise=0.580824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282379 Jy
! Component: 100  -  total flux cleaned = 0.000299777 Jy
! Component: 150  -  total flux cleaned = 0.000283492 Jy
! Component: 200  -  total flux cleaned = 0.000283602 Jy
! Total flux subtracted in 200 components = 0.000283602 Jy
! Clean residual min=-0.002628 max=0.002251 Jy/beam
! Clean residual mean=-0.000004 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.266609 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.266609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050556Jy  sigma=1.193688
! Fit after  self-cal, rms=0.050556Jy  sigma=1.193674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.62883e-05 Jy
! Component: 100  -  total flux cleaned = 8.19947e-05 Jy
! Component: 150  -  total flux cleaned = 8.20211e-05 Jy
! Component: 200  -  total flux cleaned = 8.22822e-05 Jy
! Total flux subtracted in 200 components = 8.22822e-05 Jy
! Clean residual min=-0.002564 max=0.002261 Jy/beam
! Clean residual mean=-0.000004 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.266692 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.266692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050549Jy  sigma=1.193477
! Fit after  self-cal, rms=0.050548Jy  sigma=1.193468
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050548Jy  sigma=1.193468
! Fit after  self-cal, rms=0.050561Jy  sigma=1.193460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.857 mas, bmaj=11.34 mas, bpa=19.42 degrees
! Estimated noise=0.714957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329344 Jy
! Component: 100  -  total flux cleaned = 0.000430349 Jy
! Component: 150  -  total flux cleaned = 0.000514422 Jy
! Component: 200  -  total flux cleaned = 0.00058976 Jy
! Total flux subtracted in 200 components = 0.00058976 Jy
! Clean residual min=-0.002545 max=0.002263 Jy/beam
! Clean residual mean=-0.000005 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.267281 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 0.267281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050561Jy  sigma=1.193400
! Fit after  self-cal, rms=0.050559Jy  sigma=1.193380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142581 Jy
! Component: 100  -  total flux cleaned = 0.000162843 Jy
! Component: 150  -  total flux cleaned = 0.000180991 Jy
! Component: 200  -  total flux cleaned = 0.000189616 Jy
! Total flux subtracted in 200 components = 0.000189616 Jy
! Clean residual min=-0.002513 max=0.002198 Jy/beam
! Clean residual mean=-0.000004 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.267471 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 96 components and 0.267471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050560Jy  sigma=1.193356
! Fit after  self-cal, rms=0.050560Jy  sigma=1.193349
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.267 mas, bmaj=4.767 mas, bpa=8.095 degrees
! Estimated noise=0.58093 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.267 x 4.767 at 8.095 degrees (North through East)
! Clean map  min=-0.0034382  max=0.23677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.47 mas, bmaj=3.846 mas, bpa=-5.868 degrees
! Estimated noise=0.739809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187482 Jy
! Component: 100  -  total flux cleaned = 0.228419 Jy
! Component: 150  -  total flux cleaned = 0.24123 Jy
! Component: 200  -  total flux cleaned = 0.249354 Jy
! Total flux subtracted in 200 components = 0.249354 Jy
! Clean residual min=-0.004856 max=0.004749 Jy/beam
! Clean residual mean=-0.000003 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.249354 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.249354 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.267 mas, bmaj=4.767 mas, bpa=8.095 degrees
! Estimated noise=0.58093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731628 Jy
! Component: 100  -  total flux cleaned = 0.0118276 Jy
! Component: 150  -  total flux cleaned = 0.0144502 Jy
! Component: 200  -  total flux cleaned = 0.0154392 Jy
! Total flux subtracted in 200 components = 0.0154392 Jy
! Clean residual min=-0.002849 max=0.002531 Jy/beam
! Clean residual mean=-0.000004 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.264793 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.264793 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.857 mas, bmaj=11.34 mas, bpa=19.42 degrees
! Estimated noise=0.714957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163652 Jy
! Component: 100  -  total flux cleaned = 0.00191368 Jy
! Component: 150  -  total flux cleaned = 0.00209875 Jy
! Component: 200  -  total flux cleaned = 0.00217734 Jy
! Total flux subtracted in 200 components = 0.00217734 Jy
! Clean residual min=-0.002540 max=0.002356 Jy/beam
! Clean residual mean=-0.000004 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.266971 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.30657e-05 Jy
! Component: 100  -  total flux cleaned = 2.20393e-05 Jy
! Component: 150  -  total flux cleaned = 2.14286e-05 Jy
! Component: 200  -  total flux cleaned = 2.1328e-05 Jy
! Total flux subtracted in 200 components = 2.1328e-05 Jy
! Clean residual min=-0.002483 max=0.002310 Jy/beam
! Clean residual mean=-0.000004 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.266992 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 70 components and 0.266992 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.267 mas, bmaj=4.767 mas, bpa=8.095 degrees
! Estimated noise=0.58093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126045 Jy
! Component: 100  -  total flux cleaned = -0.00022253 Jy
! Component: 150  -  total flux cleaned = -0.000328429 Jy
! Component: 200  -  total flux cleaned = -0.000306557 Jy
! Total flux subtracted in 200 components = -0.000306557 Jy
! Clean residual min=-0.002392 max=0.002270 Jy/beam
! Clean residual mean=-0.000003 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.266685 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.266685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050567Jy  sigma=1.193618
! Fit after  self-cal, rms=0.050569Jy  sigma=1.193523
wmodel /J0925+3612_S_map.mod
! wmodel: Unable to open new model file: /J0925+3612_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0925+3612_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.267 x 4.767 at 8.095 degrees (North through East)
! Clean map  min=-0.0023311  max=0.23948 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0925+3612_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.239482 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000605798 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.758884 0.758884 1.51777 3.03554 6.07107 12.1421 24.2843 48.5686 97.1372
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.239 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  395.317 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0925+3612_S_dfm.log closed on Fri May 20 00:01:10 2016