! Started logfile: /scr/pima/bg219a_uvs/J0919-0739_X_dfm.log on Fri May 20 00:00:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0919-0739_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0919-0739_X_uva.fits
! AN table 1: 52 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.819597 visibilities/baseline/integration-bin.
! Found source: J0919-0739
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 10740 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0919-0739_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.998705Jy  sigma=27.760790
! Fit after  self-cal, rms=0.926770Jy  sigma=25.658720
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6455 mas, bmaj=1.661 mas, bpa=-0.6056 degrees
! Estimated noise=0.47141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0523451 Jy
! Component: 100  -  total flux cleaned = 0.0692544 Jy
! Total flux subtracted in 100 components = 0.0692544 Jy
! Clean residual min=-0.004667 max=0.008021 Jy/beam
! Clean residual mean=0.000011 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.0692545 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0692545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054170Jy  sigma=1.448325
! Fit after  self-cal, rms=0.053830Jy  sigma=1.439292
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943883 Jy
! Component: 100  -  total flux cleaned = 0.0148974 Jy
! Total flux subtracted in 100 components = 0.0148974 Jy
! Clean residual min=-0.003410 max=0.004362 Jy/beam
! Clean residual mean=0.000009 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.0841519 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.0841519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051286Jy  sigma=1.355434
! Fit after  self-cal, rms=0.051317Jy  sigma=1.354851
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8019 mas, bmaj=1.923 mas, bpa=-1.485 degrees
! Estimated noise=0.261316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00659758 Jy
! Component: 100  -  total flux cleaned = 0.0100257 Jy
! Component: 150  -  total flux cleaned = 0.0118958 Jy
! Component: 200  -  total flux cleaned = 0.0129471 Jy
! Total flux subtracted in 200 components = 0.0129471 Jy
! Clean residual min=-0.003031 max=0.005114 Jy/beam
! Clean residual mean=0.000028 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.097099 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 0.097099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050552Jy  sigma=1.330907
! Fit after  self-cal, rms=0.050571Jy  sigma=1.330451
! Inverting map 
! Added new window around map position (2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0049865 Jy
! Component: 100  -  total flux cleaned = 0.00757037 Jy
! Component: 150  -  total flux cleaned = 0.00912944 Jy
! Component: 200  -  total flux cleaned = 0.00981445 Jy
! Total flux subtracted in 200 components = 0.00981445 Jy
! Clean residual min=-0.002313 max=0.002917 Jy/beam
! Clean residual mean=0.000016 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.106913 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 61 components and 0.106913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050131Jy  sigma=1.315368
! Fit after  self-cal, rms=0.050063Jy  sigma=1.313421
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8019 x 1.923 at -1.485 degrees (North through East)
! Clean map  min=-0.002119  max=0.075225 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.92     MK        1.03     NL        0.99     
!   OV        1.04     PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        1.03     NL        0.98     
!   OV        1.06     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.95     MK        0.97     NL        0.97     
!   OV        1.05     PT        0.97     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.01     NL        1.06     
!   OV        1.02     PT        0.95     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     LA        0.96     MK        0.97     NL        1.06     
!   OV        1.00     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.06     MK        1.00     NL        1.07     
!   OV        1.02     PT        0.95     SC        0.88     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.94     MK        1.01     NL        1.07     
!   OV        1.02     PT        0.96     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     LA        1.00     MK        0.98     NL        1.05     
!   OV        1.07     PT        0.94     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        1.00     NL        1.03     
!   OV        1.08     PT        0.95     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     LA        0.97     MK        0.96     NL        1.03     
!   OV        1.05     PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     LA        0.94     MK        0.99     NL        1.02     
!   OV        1.05     PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        0.96     NL        1.07     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.050063Jy  sigma=1.313421
! Fit after  self-cal, rms=0.049321Jy  sigma=1.307030
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8004 mas, bmaj=1.925 mas, bpa=-1.376 degrees
! Estimated noise=0.25952 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151174 Jy
! Component: 100  -  total flux cleaned = 0.00195488 Jy
! Component: 150  -  total flux cleaned = 0.0023403 Jy
! Component: 200  -  total flux cleaned = 0.00257942 Jy
! Total flux subtracted in 200 components = 0.00257942 Jy
! Clean residual min=-0.001331 max=0.001213 Jy/beam
! Clean residual mean=0.000005 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.109493 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.109493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049243Jy  sigma=1.305003
! Fit after  self-cal, rms=0.049230Jy  sigma=1.304630
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049230Jy  sigma=1.304630
! Fit after  self-cal, rms=0.049297Jy  sigma=1.302783
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8006 mas, bmaj=1.922 mas, bpa=-1.385 degrees
! Estimated noise=0.259497 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000466424 Jy
! Component: 100  -  total flux cleaned = 0.000657714 Jy
! Component: 150  -  total flux cleaned = 0.000712764 Jy
! Component: 200  -  total flux cleaned = 0.000745953 Jy
! Total flux subtracted in 200 components = 0.000745953 Jy
! Clean residual min=-0.001226 max=0.001126 Jy/beam
! Clean residual mean=0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.110239 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.110239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049279Jy  sigma=1.302363
! Fit after  self-cal, rms=0.049285Jy  sigma=1.302288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012707 Jy
! Component: 100  -  total flux cleaned = 0.000141679 Jy
! Component: 150  -  total flux cleaned = 0.000127334 Jy
! Component: 200  -  total flux cleaned = 0.000141121 Jy
! Total flux subtracted in 200 components = 0.000141121 Jy
! Clean residual min=-0.001188 max=0.001109 Jy/beam
! Clean residual mean=0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.11038 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 0.11038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049276Jy  sigma=1.302082
! Fit after  self-cal, rms=0.049276Jy  sigma=1.302072
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049276Jy  sigma=1.302072
! Fit after  self-cal, rms=0.049292Jy  sigma=1.302047
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8001 mas, bmaj=1.922 mas, bpa=-1.348 degrees
! Estimated noise=0.25948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181526 Jy
! Component: 100  -  total flux cleaned = 0.00026519 Jy
! Component: 150  -  total flux cleaned = 0.000315941 Jy
! Component: 200  -  total flux cleaned = 0.000340069 Jy
! Total flux subtracted in 200 components = 0.000340069 Jy
! Clean residual min=-0.001172 max=0.001086 Jy/beam
! Clean residual mean=0.000002 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.11072 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.11072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049285Jy  sigma=1.301880
! Fit after  self-cal, rms=0.049286Jy  sigma=1.301871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.36207e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109652 Jy
! Component: 150  -  total flux cleaned = 0.000109433 Jy
! Component: 200  -  total flux cleaned = 0.000119963 Jy
! Total flux subtracted in 200 components = 0.000119963 Jy
! Clean residual min=-0.001167 max=0.001075 Jy/beam
! Clean residual mean=0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.11084 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.11084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049281Jy  sigma=1.301754
! Fit after  self-cal, rms=0.049281Jy  sigma=1.301750
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049281Jy  sigma=1.301750
! Fit after  self-cal, rms=0.049310Jy  sigma=1.301739
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=4.147 mas, bpa=-3.287 degrees
! Estimated noise=0.346113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324223 Jy
! Component: 100  -  total flux cleaned = 0.000389504 Jy
! Component: 150  -  total flux cleaned = 0.00041123 Jy
! Component: 200  -  total flux cleaned = 0.000430707 Jy
! Total flux subtracted in 200 components = 0.000430707 Jy
! Clean residual min=-0.001060 max=0.000951 Jy/beam
! Clean residual mean=0.000003 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.111271 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 119 components and 0.111271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049310Jy  sigma=1.301703
! Fit after  self-cal, rms=0.049308Jy  sigma=1.301691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110296 Jy
! Component: 100  -  total flux cleaned = 0.000136334 Jy
! Component: 150  -  total flux cleaned = 0.000148455 Jy
! Component: 200  -  total flux cleaned = 0.000165171 Jy
! Total flux subtracted in 200 components = 0.000165171 Jy
! Clean residual min=-0.001028 max=0.000937 Jy/beam
! Clean residual mean=0.000003 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.111436 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 126 components and 0.111436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049308Jy  sigma=1.301681
! Fit after  self-cal, rms=0.049307Jy  sigma=1.301678
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7998 mas, bmaj=1.923 mas, bpa=-1.329 degrees
! Estimated noise=0.259538 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7998 x 1.923 at -1.329 degrees (North through East)
! Clean map  min=-0.0018985  max=0.074673 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6438 mas, bmaj=1.662 mas, bpa=-0.5835 degrees
! Estimated noise=0.467257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0519649 Jy
! Component: 100  -  total flux cleaned = 0.0693926 Jy
! Component: 150  -  total flux cleaned = 0.0789186 Jy
! Component: 200  -  total flux cleaned = 0.0849777 Jy
! Total flux subtracted in 200 components = 0.0849777 Jy
! Clean residual min=-0.003054 max=0.003823 Jy/beam
! Clean residual mean=0.000007 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.0849777 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0849777 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7998 mas, bmaj=1.923 mas, bpa=-1.329 degrees
! Estimated noise=0.259538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735608 Jy
! Component: 100  -  total flux cleaned = 0.0116615 Jy
! Component: 150  -  total flux cleaned = 0.0147986 Jy
! Component: 200  -  total flux cleaned = 0.0171398 Jy
! Total flux subtracted in 200 components = 0.0171398 Jy
! Clean residual min=-0.001712 max=0.001615 Jy/beam
! Clean residual mean=0.000012 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.102117 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.102117 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=4.147 mas, bpa=-3.287 degrees
! Estimated noise=0.346113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318191 Jy
! Component: 100  -  total flux cleaned = 0.00503227 Jy
! Component: 150  -  total flux cleaned = 0.00622965 Jy
! Component: 200  -  total flux cleaned = 0.00703954 Jy
! Total flux subtracted in 200 components = 0.00703954 Jy
! Clean residual min=-0.001229 max=0.000917 Jy/beam
! Clean residual mean=0.000009 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.109157 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000570268 Jy
! Component: 100  -  total flux cleaned = 0.000975939 Jy
! Component: 150  -  total flux cleaned = 0.00115194 Jy
! Component: 200  -  total flux cleaned = 0.00121858 Jy
! Total flux subtracted in 200 components = 0.00121858 Jy
! Clean residual min=-0.001079 max=0.000906 Jy/beam
! Clean residual mean=0.000005 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.110376 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 85 components and 0.110376 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7998 mas, bmaj=1.923 mas, bpa=-1.329 degrees
! Estimated noise=0.259538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.20634e-05 Jy
! Component: 100  -  total flux cleaned = 2.88897e-05 Jy
! Component: 150  -  total flux cleaned = -8.78797e-06 Jy
! Component: 200  -  total flux cleaned = -4.32867e-05 Jy
! Total flux subtracted in 200 components = -4.32867e-05 Jy
! Clean residual min=-0.001214 max=0.001063 Jy/beam
! Clean residual mean=0.000002 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.110332 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 0.110332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049338Jy  sigma=1.302482
! Fit after  self-cal, rms=0.049330Jy  sigma=1.302234
wmodel /J0919-0739_X_map.mod
! wmodel: Unable to open new model file: /J0919-0739_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0919-0739_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7998 x 1.923 at -1.329 degrees (North through East)
! Clean map  min=-0.0010501  max=0.074873 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0919-0739_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0748729 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262003 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04979 1.04979 2.09958 4.19916 8.39832 16.7966 33.5933 67.1866
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  285.771 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0919-0739_X_dfm.log closed on Fri May 20 00:00:45 2016