! Started logfile: /scr/pima/bg219a_uvs/J0919-0739_S_dfm.log on Fri May 20 00:00:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0919-0739_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0919-0739_S_uva.fits
! AN table 1: 52 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.819597 visibilities/baseline/integration-bin.
! Found source: J0919-0739
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3580 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0919-0739_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012660Jy  sigma=22.816960
! Fit after  self-cal, rms=0.851674Jy  sigma=19.002607
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.569 mas, bmaj=6.687 mas, bpa=-5.196 degrees
! Estimated noise=0.900073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111468 Jy
! Component: 100  -  total flux cleaned = 0.144209 Jy
! Total flux subtracted in 100 components = 0.144209 Jy
! Clean residual min=-0.010634 max=0.015408 Jy/beam
! Clean residual mean=-0.000013 rms=0.002778 Jy/beam
! Combined flux in latest and established models = 0.144209 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.144209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067157Jy  sigma=1.444087
! Fit after  self-cal, rms=0.067152Jy  sigma=1.442896
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.992 mas, bmaj=7.421 mas, bpa=-3.296 degrees
! Estimated noise=0.564004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236759 Jy
! Component: 100  -  total flux cleaned = 0.0355028 Jy
! Component: 150  -  total flux cleaned = 0.0419258 Jy
! Component: 200  -  total flux cleaned = 0.0455927 Jy
! Total flux subtracted in 200 components = 0.0455927 Jy
! Clean residual min=-0.004124 max=0.004475 Jy/beam
! Clean residual mean=0.000003 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.189801 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.189801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059539Jy  sigma=1.236479
! Fit after  self-cal, rms=0.059523Jy  sigma=1.234907
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.992 x 7.421 at -3.296 degrees (North through East)
! Clean map  min=-0.004132  max=0.15145 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.01     MK        1.04     NL        0.97     
!   OV        1.00     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.97     MK        1.02     NL        0.99     
!   OV        1.00     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.98     MK        1.02     NL        1.01     
!   OV        1.03     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.97     MK        1.00     NL        0.98     
!   OV        0.98     PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059523Jy  sigma=1.234907
! Fit after  self-cal, rms=0.059389Jy  sigma=1.229751
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=7.457 mas, bpa=-3.326 degrees
! Estimated noise=0.560683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.93689e-06 Jy
! Component: 100  -  total flux cleaned = -0.000145116 Jy
! Component: 150  -  total flux cleaned = -0.000145771 Jy
! Component: 200  -  total flux cleaned = -0.000146008 Jy
! Total flux subtracted in 200 components = -0.000146008 Jy
! Clean residual min=-0.003885 max=0.003932 Jy/beam
! Clean residual mean=-0.000001 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.189655 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 0.189655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059364Jy  sigma=1.229087
! Fit after  self-cal, rms=0.059371Jy  sigma=1.228973
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059371Jy  sigma=1.228973
! Fit after  self-cal, rms=0.059275Jy  sigma=1.226001
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=7.465 mas, bpa=-3.377 degrees
! Estimated noise=0.560044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163364 Jy
! Component: 100  -  total flux cleaned = -0.000295486 Jy
! Component: 150  -  total flux cleaned = -0.000319403 Jy
! Component: 200  -  total flux cleaned = -0.000319239 Jy
! Total flux subtracted in 200 components = -0.000319239 Jy
! Clean residual min=-0.003642 max=0.003387 Jy/beam
! Clean residual mean=0.000004 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.189336 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.189336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059257Jy  sigma=1.225512
! Fit after  self-cal, rms=0.059253Jy  sigma=1.225445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60908e-06 Jy
! Component: 100  -  total flux cleaned = -3.09922e-06 Jy
! Component: 150  -  total flux cleaned = -1.73972e-06 Jy
! Component: 200  -  total flux cleaned = -1.1986e-06 Jy
! Total flux subtracted in 200 components = -1.1986e-06 Jy
! Clean residual min=-0.003596 max=0.003304 Jy/beam
! Clean residual mean=0.000004 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.189335 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.189335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059240Jy  sigma=1.225107
! Fit after  self-cal, rms=0.059237Jy  sigma=1.225084
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059237Jy  sigma=1.225084
! Fit after  self-cal, rms=0.059204Jy  sigma=1.225065
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=7.469 mas, bpa=-3.408 degrees
! Estimated noise=0.559341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000257261 Jy
! Component: 100  -  total flux cleaned = -0.000318788 Jy
! Component: 150  -  total flux cleaned = -0.000319455 Jy
! Component: 200  -  total flux cleaned = -0.000318797 Jy
! Total flux subtracted in 200 components = -0.000318797 Jy
! Clean residual min=-0.003534 max=0.003207 Jy/beam
! Clean residual mean=0.000004 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.189016 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.189016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059193Jy  sigma=1.224780
! Fit after  self-cal, rms=0.059191Jy  sigma=1.224764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.86361e-06 Jy
! Component: 100  -  total flux cleaned = -2.72139e-06 Jy
! Component: 150  -  total flux cleaned = -1.70753e-06 Jy
! Component: 200  -  total flux cleaned = -1.4406e-06 Jy
! Total flux subtracted in 200 components = -1.4406e-06 Jy
! Clean residual min=-0.003500 max=0.003145 Jy/beam
! Clean residual mean=0.000004 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.189015 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.189015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059182Jy  sigma=1.224544
! Fit after  self-cal, rms=0.059180Jy  sigma=1.224534
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059180Jy  sigma=1.224534
! Fit after  self-cal, rms=0.059156Jy  sigma=1.224520
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.441 mas, bmaj=14.56 mas, bpa=-4.083 degrees
! Estimated noise=0.724956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256335 Jy
! Component: 100  -  total flux cleaned = 0.000251506 Jy
! Component: 150  -  total flux cleaned = 0.00024883 Jy
! Component: 200  -  total flux cleaned = 0.00020719 Jy
! Total flux subtracted in 200 components = 0.00020719 Jy
! Clean residual min=-0.003002 max=0.003409 Jy/beam
! Clean residual mean=0.000010 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.189222 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.189222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059194Jy  sigma=1.225007
! Fit after  self-cal, rms=0.059151Jy  sigma=1.224197
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.24975e-05 Jy
! Component: 100  -  total flux cleaned = -6.61389e-05 Jy
! Component: 150  -  total flux cleaned = -9.00634e-05 Jy
! Component: 200  -  total flux cleaned = -0.000128724 Jy
! Total flux subtracted in 200 components = -0.000128724 Jy
! Clean residual min=-0.003021 max=0.003407 Jy/beam
! Clean residual mean=0.000010 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.189093 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.189093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059188Jy  sigma=1.224669
! Fit after  self-cal, rms=0.059157Jy  sigma=1.224095
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.018 mas, bmaj=7.472 mas, bpa=-3.427 degrees
! Estimated noise=0.558789 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.018 x 7.472 at -3.427 degrees (North through East)
! Clean map  min=-0.0030438  max=0.14958 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.587 mas, bmaj=6.716 mas, bpa=-5.372 degrees
! Estimated noise=0.896174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110694 Jy
! Component: 100  -  total flux cleaned = 0.142899 Jy
! Component: 150  -  total flux cleaned = 0.160473 Jy
! Component: 200  -  total flux cleaned = 0.170859 Jy
! Total flux subtracted in 200 components = 0.170859 Jy
! Clean residual min=-0.006890 max=0.006986 Jy/beam
! Clean residual mean=-0.000003 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.170859 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.170859 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.018 mas, bmaj=7.472 mas, bpa=-3.427 degrees
! Estimated noise=0.558789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00926749 Jy
! Component: 100  -  total flux cleaned = 0.0140481 Jy
! Component: 150  -  total flux cleaned = 0.0168191 Jy
! Component: 200  -  total flux cleaned = 0.0185601 Jy
! Total flux subtracted in 200 components = 0.0185601 Jy
! Clean residual min=-0.003227 max=0.002725 Jy/beam
! Clean residual mean=0.000003 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.18942 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 53 components and 0.18942 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.441 mas, bmaj=14.56 mas, bpa=-4.083 degrees
! Estimated noise=0.724956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133063 Jy
! Component: 100  -  total flux cleaned = 0.00161195 Jy
! Component: 150  -  total flux cleaned = 0.00161284 Jy
! Component: 200  -  total flux cleaned = 0.00163106 Jy
! Total flux subtracted in 200 components = 0.00163106 Jy
! Clean residual min=-0.002596 max=0.002824 Jy/beam
! Clean residual mean=0.000007 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.191051 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.73159e-05 Jy
! Component: 100  -  total flux cleaned = -1.65242e-05 Jy
! Component: 150  -  total flux cleaned = -1.66975e-05 Jy
! Component: 200  -  total flux cleaned = -3.09922e-05 Jy
! Total flux subtracted in 200 components = -3.09922e-05 Jy
! Clean residual min=-0.002548 max=0.002832 Jy/beam
! Clean residual mean=0.000007 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.19102 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.19102 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.018 mas, bmaj=7.472 mas, bpa=-3.427 degrees
! Estimated noise=0.558789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352524 Jy
! Component: 100  -  total flux cleaned = -0.000389946 Jy
! Component: 150  -  total flux cleaned = -0.000332732 Jy
! Component: 200  -  total flux cleaned = -0.000331701 Jy
! Total flux subtracted in 200 components = -0.000331701 Jy
! Clean residual min=-0.003017 max=0.002742 Jy/beam
! Clean residual mean=0.000003 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.190688 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.190688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059006Jy  sigma=1.220880
! Fit after  self-cal, rms=0.058972Jy  sigma=1.220428
wmodel /J0919-0739_S_map.mod
! wmodel: Unable to open new model file: /J0919-0739_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0919-0739_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.018 x 7.472 at -3.427 degrees (North through East)
! Clean map  min=-0.0029098  max=0.14961 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0919-0739_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.14961 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000675974 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.35547 1.35547 2.71093 5.42187 10.8437 21.6875 43.3749 86.7499
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.149 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  221.325 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0919-0739_S_dfm.log closed on Fri May 20 00:00:41 2016