! Started logfile: /scr/pima/bg219a_uvs/J0913+4402_X_dfm.log on Fri May 20 00:00:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0913+4402_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0913+4402_X_uva.fits
! AN table 1: 56 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.818027 visibilities/baseline/integration-bin.
! Found source: J0913+4402
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 11544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0913+4402_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011686Jy  sigma=28.679475
! Fit after  self-cal, rms=0.908753Jy  sigma=25.670819
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7973 mas, bmaj=0.8984 mas, bpa=-43.83 degrees
! Estimated noise=0.573531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0692538 Jy
! Component: 100  -  total flux cleaned = 0.0891404 Jy
! Total flux subtracted in 100 components = 0.0891404 Jy
! Clean residual min=-0.003959 max=0.007477 Jy/beam
! Clean residual mean=0.000013 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.0891405 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0891405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051104Jy  sigma=1.361415
! Fit after  self-cal, rms=0.050865Jy  sigma=1.353866
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749143 Jy
! Component: 100  -  total flux cleaned = 0.0103481 Jy
! Total flux subtracted in 100 components = 0.0103481 Jy
! Clean residual min=-0.003108 max=0.003780 Jy/beam
! Clean residual mean=0.000006 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.0994886 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.0994886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049730Jy  sigma=1.313931
! Fit after  self-cal, rms=0.049731Jy  sigma=1.313470
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.175 mas, bpa=-39.19 degrees
! Estimated noise=0.239156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232714 Jy
! Component: 100  -  total flux cleaned = 0.00334111 Jy
! Component: 150  -  total flux cleaned = 0.00381979 Jy
! Component: 200  -  total flux cleaned = 0.00405971 Jy
! Total flux subtracted in 200 components = 0.00405971 Jy
! Clean residual min=-0.001790 max=0.002785 Jy/beam
! Clean residual mean=0.000010 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.103548 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.103548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049662Jy  sigma=1.309869
! Fit after  self-cal, rms=0.049668Jy  sigma=1.309791
! Inverting map 
! Added new window around map position (0.2, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023178 Jy
! Component: 100  -  total flux cleaned = 0.00283466 Jy
! Component: 150  -  total flux cleaned = 0.0030663 Jy
! Component: 200  -  total flux cleaned = 0.00314611 Jy
! Total flux subtracted in 200 components = 0.00314611 Jy
! Clean residual min=-0.001622 max=0.001523 Jy/beam
! Clean residual mean=0.000006 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.106694 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.106694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049553Jy  sigma=1.306560
! Fit after  self-cal, rms=0.049559Jy  sigma=1.306350
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.1 x 1.175 at -39.19 degrees (North through East)
! Clean map  min=-0.0014907  max=0.091314 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     LA        0.98     MK        1.02     NL        1.00     
!   OV        0.98     PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        1.01     MK        1.05     NL        1.02     
!   OV        1.00     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.98     MK        0.99     NL        1.03     
!   OV        0.98     PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        1.03     NL        1.04     
!   OV        0.97     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.98     MK        0.99     NL        1.04     
!   OV        0.95     PT        1.02     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.02     MK        1.00     NL        1.02     
!   OV        1.00     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.96     MK        1.01     NL        1.01     
!   OV        1.02     PT        0.99     SC        1.11     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        1.01     MK        0.99     NL        1.01     
!   OV        0.96     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.97     MK        1.00     NL        1.01     
!   OV        0.99     PT        1.01     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        1.01     NL        1.02     
!   OV        0.97     PT        0.94     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.00     MK        1.02     NL        1.00     
!   OV        0.98     PT        1.04     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        0.99     NL        0.99     
!   OV        1.00     PT        0.95     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.049559Jy  sigma=1.306350
! Fit after  self-cal, rms=0.050132Jy  sigma=1.302744
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.186 mas, bpa=-39.11 degrees
! Estimated noise=0.240433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361245 Jy
! Component: 100  -  total flux cleaned = -0.000571912 Jy
! Component: 150  -  total flux cleaned = -0.000619217 Jy
! Component: 200  -  total flux cleaned = -0.000646855 Jy
! Total flux subtracted in 200 components = -0.000646855 Jy
! Clean residual min=-0.001320 max=0.001405 Jy/beam
! Clean residual mean=0.000005 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.106048 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.106048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050116Jy  sigma=1.302366
! Fit after  self-cal, rms=0.050130Jy  sigma=1.302286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050130Jy  sigma=1.302286
! Fit after  self-cal, rms=0.050461Jy  sigma=1.298469
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.186 mas, bpa=-39.25 degrees
! Estimated noise=0.240569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000655152 Jy
! Component: 100  -  total flux cleaned = -0.000745538 Jy
! Component: 150  -  total flux cleaned = -0.000734027 Jy
! Component: 200  -  total flux cleaned = -0.00074494 Jy
! Total flux subtracted in 200 components = -0.00074494 Jy
! Clean residual min=-0.001078 max=0.001258 Jy/beam
! Clean residual mean=0.000002 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.105303 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.105303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050449Jy  sigma=1.298211
! Fit after  self-cal, rms=0.050459Jy  sigma=1.298127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.2, -29.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000955685 Jy
! Component: 100  -  total flux cleaned = 0.000846212 Jy
! Component: 150  -  total flux cleaned = 0.000721154 Jy
! Component: 200  -  total flux cleaned = 0.000629325 Jy
! Total flux subtracted in 200 components = 0.000629325 Jy
! Clean residual min=-0.001070 max=0.001175 Jy/beam
! Clean residual mean=0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.105932 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 70 components and 0.105932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050429Jy  sigma=1.297508
! Fit after  self-cal, rms=0.050425Jy  sigma=1.297446
! Inverting map 
! Added new window around map position (-39.4, -44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985315 Jy
! Component: 100  -  total flux cleaned = 0.00149506 Jy
! Component: 150  -  total flux cleaned = 0.00169126 Jy
! Component: 200  -  total flux cleaned = 0.00173531 Jy
! Total flux subtracted in 200 components = 0.00173531 Jy
! Clean residual min=-0.000929 max=0.000945 Jy/beam
! Clean residual mean=0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.107667 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.107667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050400Jy  sigma=1.296873
! Fit after  self-cal, rms=0.050398Jy  sigma=1.296794
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050398Jy  sigma=1.296794
! Fit after  self-cal, rms=0.050446Jy  sigma=1.296823
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.186 mas, bpa=-39.19 degrees
! Estimated noise=0.24049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224797 Jy
! Component: 100  -  total flux cleaned = 0.000357458 Jy
! Component: 150  -  total flux cleaned = 0.000344525 Jy
! Component: 200  -  total flux cleaned = 0.000307238 Jy
! Total flux subtracted in 200 components = 0.000307238 Jy
! Clean residual min=-0.000895 max=0.000853 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.107974 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 90 components and 0.107974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050435Jy  sigma=1.296598
! Fit after  self-cal, rms=0.050436Jy  sigma=1.296576
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.71448e-05 Jy
! Component: 100  -  total flux cleaned = 7.54129e-05 Jy
! Component: 150  -  total flux cleaned = 5.38747e-05 Jy
! Component: 200  -  total flux cleaned = 5.43194e-05 Jy
! Total flux subtracted in 200 components = 5.43194e-05 Jy
! Clean residual min=-0.000885 max=0.000864 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.108029 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 94 components and 0.108029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050431Jy  sigma=1.296464
! Fit after  self-cal, rms=0.050430Jy  sigma=1.296461
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050430Jy  sigma=1.296461
! Fit after  self-cal, rms=0.050419Jy  sigma=1.296414
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.484 mas, bmaj=2.703 mas, bpa=20.28 degrees
! Estimated noise=0.290325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.92472e-05 Jy
! Component: 100  -  total flux cleaned = -9.08907e-05 Jy
! Component: 150  -  total flux cleaned = -0.000141678 Jy
! Component: 200  -  total flux cleaned = -0.000190091 Jy
! Total flux subtracted in 200 components = -0.000190091 Jy
! Clean residual min=-0.000779 max=0.000600 Jy/beam
! Clean residual mean=-0.000002 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.107839 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.107839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050416Jy  sigma=1.296364
! Fit after  self-cal, rms=0.050416Jy  sigma=1.296352
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.78497e-05 Jy
! Component: 100  -  total flux cleaned = -5.81651e-05 Jy
! Component: 150  -  total flux cleaned = -7.16201e-05 Jy
! Component: 200  -  total flux cleaned = -8.4253e-05 Jy
! Total flux subtracted in 200 components = -8.4253e-05 Jy
! Clean residual min=-0.000768 max=0.000596 Jy/beam
! Clean residual mean=-0.000002 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.107754 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 0.107754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050415Jy  sigma=1.296340
! Fit after  self-cal, rms=0.050415Jy  sigma=1.296339
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.186 mas, bpa=-39.13 degrees
! Estimated noise=0.240471 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 1.186 at -39.13 degrees (North through East)
! Clean map  min=-0.00074507  max=0.091748 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7982 mas, bmaj=0.9058 mas, bpa=-43.86 degrees
! Estimated noise=0.581587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0700336 Jy
! Component: 100  -  total flux cleaned = 0.090436 Jy
! Component: 150  -  total flux cleaned = 0.0978588 Jy
! Component: 200  -  total flux cleaned = 0.0999424 Jy
! Total flux subtracted in 200 components = 0.0999424 Jy
! Clean residual min=-0.002834 max=0.002800 Jy/beam
! Clean residual mean=0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.0999424 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0999424 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.186 mas, bpa=-39.13 degrees
! Estimated noise=0.240471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276518 Jy
! Component: 100  -  total flux cleaned = 0.00427774 Jy
! Component: 150  -  total flux cleaned = 0.0054199 Jy
! Component: 200  -  total flux cleaned = 0.00628896 Jy
! Total flux subtracted in 200 components = 0.00628896 Jy
! Clean residual min=-0.001051 max=0.001070 Jy/beam
! Clean residual mean=0.000002 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.106231 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.106231 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.484 mas, bmaj=2.703 mas, bpa=20.28 degrees
! Estimated noise=0.290325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000764338 Jy
! Component: 100  -  total flux cleaned = 0.000942942 Jy
! Component: 150  -  total flux cleaned = 0.00104222 Jy
! Component: 200  -  total flux cleaned = 0.0011425 Jy
! Total flux subtracted in 200 components = 0.0011425 Jy
! Clean residual min=-0.000802 max=0.000737 Jy/beam
! Clean residual mean=-0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.107374 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.62002e-05 Jy
! Component: 100  -  total flux cleaned = 0.00015149 Jy
! Component: 150  -  total flux cleaned = 0.000218724 Jy
! Component: 200  -  total flux cleaned = 0.000278147 Jy
! Total flux subtracted in 200 components = 0.000278147 Jy
! Clean residual min=-0.000777 max=0.000693 Jy/beam
! Clean residual mean=-0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.107652 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 68 components and 0.107652 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.186 mas, bpa=-39.13 degrees
! Estimated noise=0.240471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.87607e-05 Jy
! Component: 100  -  total flux cleaned = 7.65298e-05 Jy
! Component: 150  -  total flux cleaned = 0.000132125 Jy
! Component: 200  -  total flux cleaned = 0.000216529 Jy
! Total flux subtracted in 200 components = 0.000216529 Jy
! Clean residual min=-0.000901 max=0.000879 Jy/beam
! Clean residual mean=-0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.107869 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.107869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050434Jy  sigma=1.296922
! Fit after  self-cal, rms=0.050426Jy  sigma=1.296846
wmodel /J0913+4402_X_map.mod
! wmodel: Unable to open new model file: /J0913+4402_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0913+4402_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 1.186 at -39.13 degrees (North through East)
! Clean map  min=-0.00081108  max=0.091485 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0913+4402_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0914848 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.695519 0.695519 1.39104 2.78208 5.56415 11.1283 22.2566 44.5132 89.0265
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.091 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  431.332 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0913+4402_X_dfm.log closed on Fri May 20 00:00:37 2016