! Started logfile: /scr/pima/bg219a_uvs/J0909+4253_X_dfm.log on Thu May 19 23:59:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0909+4253_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0909+4253_X_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.807823 visibilities/baseline/integration-bin.
! Found source: J0909+4253
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0909+4253_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.237108Jy  sigma=27.844644
! Fit after  self-cal, rms=0.403420Jy  sigma=9.117778
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8218 mas, bmaj=0.9182 mas, bpa=-36.73 degrees
! Estimated noise=0.978582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.457021 Jy
! Component: 100  -  total flux cleaned = 0.58246 Jy
! Total flux subtracted in 100 components = 0.58246 Jy
! Clean residual min=-0.029427 max=0.054730 Jy/beam
! Clean residual mean=0.000160 rms=0.007304 Jy/beam
! Combined flux in latest and established models = 0.58246 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.58246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.154133Jy  sigma=3.402587
! Fit after  self-cal, rms=0.153986Jy  sigma=3.397112
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0504414 Jy
! Component: 100  -  total flux cleaned = 0.0752231 Jy
! Total flux subtracted in 100 components = 0.0752231 Jy
! Clean residual min=-0.023204 max=0.033252 Jy/beam
! Clean residual mean=0.000115 rms=0.005630 Jy/beam
! Combined flux in latest and established models = 0.657683 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.657683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125827Jy  sigma=2.806596
! Fit after  self-cal, rms=0.125736Jy  sigma=2.802861
! Inverting map 
! Added new window around map position (0.8, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0319587 Jy
! Component: 100  -  total flux cleaned = 0.0477244 Jy
! Total flux subtracted in 100 components = 0.0477244 Jy
! Clean residual min=-0.017023 max=0.028844 Jy/beam
! Clean residual mean=0.000084 rms=0.004449 Jy/beam
! Combined flux in latest and established models = 0.705408 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 20 components and 0.705408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115927Jy  sigma=2.600661
! Fit after  self-cal, rms=0.114609Jy  sigma=2.567549
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.109 mas, bpa=-8.574 degrees
! Estimated noise=0.472687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209891 Jy
! Component: 100  -  total flux cleaned = 0.0327692 Jy
! Component: 150  -  total flux cleaned = 0.0406013 Jy
! Component: 200  -  total flux cleaned = 0.0458264 Jy
! Total flux subtracted in 200 components = 0.0458264 Jy
! Clean residual min=-0.012967 max=0.018200 Jy/beam
! Clean residual mean=0.000103 rms=0.003698 Jy/beam
! Combined flux in latest and established models = 0.751234 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.751234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110591Jy  sigma=2.476732
! Fit after  self-cal, rms=0.110288Jy  sigma=2.468325
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.109 at -8.574 degrees (North through East)
! Clean map  min=-0.012264  max=0.60034 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.01     NL        1.05     
!   OV        1.00     PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.97     MK        1.01     NL        1.06     
!   OV        1.01     PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        1.01     NL        1.05     
!   OV        1.00     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        0.99     NL        1.07     
!   OV        1.01     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.96     MK        0.99     NL        1.07     
!   OV        1.00     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.98     MK        1.02     NL        1.05     
!   OV        1.00     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.97     MK        1.01     NL        1.04     
!   OV        0.99     PT        0.96     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.95     MK        1.03     NL        1.05     
!   OV        1.01     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.97     MK        1.03     NL        1.05     
!   OV        1.00     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.96     MK        1.02     NL        1.03     
!   OV        0.98     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.96     MK        1.01     NL        1.03     
!   OV        1.02     PT        0.96     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.96     MK        1.02     NL        1.04     
!   OV        1.00     PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.110288Jy  sigma=2.468325
! Fit after  self-cal, rms=0.107696Jy  sigma=2.402777
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.103 mas, bmaj=1.118 mas, bpa=-0.9701 degrees
! Estimated noise=0.473258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00627016 Jy
! Component: 100  -  total flux cleaned = -0.0081448 Jy
! Component: 150  -  total flux cleaned = -0.00859236 Jy
! Component: 200  -  total flux cleaned = -0.00900609 Jy
! Total flux subtracted in 200 components = -0.00900609 Jy
! Clean residual min=-0.009684 max=0.011837 Jy/beam
! Clean residual mean=0.000077 rms=0.002574 Jy/beam
! Combined flux in latest and established models = 0.742228 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.742228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107226Jy  sigma=2.394418
! Fit after  self-cal, rms=0.107169Jy  sigma=2.394063
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107169Jy  sigma=2.394063
! Fit after  self-cal, rms=0.106512Jy  sigma=2.370499
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.102 mas, bmaj=1.117 mas, bpa=-0.1269 degrees
! Estimated noise=0.472007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00440245 Jy
! Component: 100  -  total flux cleaned = -0.00521161 Jy
! Component: 150  -  total flux cleaned = -0.00599681 Jy
! Component: 200  -  total flux cleaned = -0.00665327 Jy
! Total flux subtracted in 200 components = -0.00665327 Jy
! Clean residual min=-0.007864 max=0.010932 Jy/beam
! Clean residual mean=0.000088 rms=0.002113 Jy/beam
! Combined flux in latest and established models = 0.735575 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 37 components and 0.735575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106201Jy  sigma=2.366022
! Fit after  self-cal, rms=0.106169Jy  sigma=2.365415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00989113 Jy
! Component: 100  -  total flux cleaned = 0.0132934 Jy
! Component: 150  -  total flux cleaned = 0.0143447 Jy
! Component: 200  -  total flux cleaned = 0.0149142 Jy
! Total flux subtracted in 200 components = 0.0149142 Jy
! Clean residual min=-0.006176 max=0.007361 Jy/beam
! Clean residual mean=0.000072 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.750489 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 0.750489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105313Jy  sigma=2.345981
! Fit after  self-cal, rms=0.105226Jy  sigma=2.344463
! Inverting map 
! Added new window around map position (5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0065172 Jy
! Component: 100  -  total flux cleaned = 0.00995871 Jy
! Component: 150  -  total flux cleaned = 0.0114355 Jy
! Component: 200  -  total flux cleaned = 0.0122358 Jy
! Total flux subtracted in 200 components = 0.0122358 Jy
! Clean residual min=-0.004753 max=0.005459 Jy/beam
! Clean residual mean=0.000063 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.762725 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.762725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104729Jy  sigma=2.335275
! Fit after  self-cal, rms=0.104701Jy  sigma=2.334532
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104701Jy  sigma=2.334532
! Fit after  self-cal, rms=0.104539Jy  sigma=2.332529
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.101 mas, bmaj=1.117 mas, bpa=-6.81 degrees
! Estimated noise=0.470827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069991 Jy
! Component: 100  -  total flux cleaned = 0.000611505 Jy
! Component: 150  -  total flux cleaned = 0.000535543 Jy
! Component: 200  -  total flux cleaned = 0.000653729 Jy
! Total flux subtracted in 200 components = 0.000653729 Jy
! Clean residual min=-0.004373 max=0.004942 Jy/beam
! Clean residual mean=0.000053 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.763379 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 83 components and 0.763379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104399Jy  sigma=2.329971
! Fit after  self-cal, rms=0.104394Jy  sigma=2.329733
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -13.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438335 Jy
! Component: 100  -  total flux cleaned = 0.00638165 Jy
! Component: 150  -  total flux cleaned = 0.00776329 Jy
! Component: 200  -  total flux cleaned = 0.00839357 Jy
! Total flux subtracted in 200 components = 0.00839357 Jy
! Clean residual min=-0.003885 max=0.004056 Jy/beam
! Clean residual mean=0.000030 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.771772 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 112 components and 0.771772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104164Jy  sigma=2.326437
! Fit after  self-cal, rms=0.104151Jy  sigma=2.325945
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104151Jy  sigma=2.325945
! Fit after  self-cal, rms=0.104106Jy  sigma=2.325354
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.398 mas, bmaj=2.644 mas, bpa=23.41 degrees
! Estimated noise=0.597651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140305 Jy
! Component: 100  -  total flux cleaned = 0.00183102 Jy
! Component: 150  -  total flux cleaned = 0.00223634 Jy
! Component: 200  -  total flux cleaned = 0.00255016 Jy
! Total flux subtracted in 200 components = 0.00255016 Jy
! Clean residual min=-0.004776 max=0.006000 Jy/beam
! Clean residual mean=0.000051 rms=0.001414 Jy/beam
! Combined flux in latest and established models = 0.774322 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 129 components and 0.774322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104046Jy  sigma=2.325063
! Fit after  self-cal, rms=0.104043Jy  sigma=2.324947
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 41.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387268 Jy
! Component: 100  -  total flux cleaned = 0.00397304 Jy
! Component: 150  -  total flux cleaned = 0.00463583 Jy
! Component: 200  -  total flux cleaned = 0.00527974 Jy
! Total flux subtracted in 200 components = 0.00527974 Jy
! Clean residual min=-0.003632 max=0.003686 Jy/beam
! Clean residual mean=0.000058 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.779602 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 164 components and 0.779602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103895Jy  sigma=2.322781
! Fit after  self-cal, rms=0.103890Jy  sigma=2.322544
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.101 mas, bmaj=1.117 mas, bpa=-9.127 degrees
! Estimated noise=0.470307 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.101 x 1.117 at -9.127 degrees (North through East)
! Clean map  min=-0.0035253  max=0.59931 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103890Jy  sigma=2.322544
! Fit after  self-cal, rms=0.097905Jy  sigma=2.188325
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.122 mas, bpa=21.06 degrees
! Estimated noise=0.456433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0149397 Jy
! Component: 100  -  total flux cleaned = -0.016603 Jy
! Component: 150  -  total flux cleaned = -0.016092 Jy
! Component: 200  -  total flux cleaned = -0.0159648 Jy
! Total flux subtracted in 200 components = -0.0159648 Jy
! Clean residual min=-0.003985 max=0.004875 Jy/beam
! Clean residual mean=0.000015 rms=0.001176 Jy/beam
! Combined flux in latest and established models = 0.763637 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 0.763637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095674Jy  sigma=2.136529
! Fit after  self-cal, rms=0.095647Jy  sigma=2.136089
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000934459 Jy
! Component: 100  -  total flux cleaned = 0.00147616 Jy
! Component: 150  -  total flux cleaned = 0.00184724 Jy
! Component: 200  -  total flux cleaned = 0.0017632 Jy
! Total flux subtracted in 200 components = 0.0017632 Jy
! Clean residual min=-0.003324 max=0.004176 Jy/beam
! Clean residual mean=0.000009 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.765401 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 211 components and 0.765401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095445Jy  sigma=2.131778
! Fit after  self-cal, rms=0.095433Jy  sigma=2.131633
! Inverting map 
! Added new window around map position (-1.6, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332682 Jy
! Component: 100  -  total flux cleaned = 0.00427827 Jy
! Component: 150  -  total flux cleaned = 0.00532901 Jy
! Component: 200  -  total flux cleaned = 0.00607026 Jy
! Total flux subtracted in 200 components = 0.00607026 Jy
! Clean residual min=-0.002985 max=0.002935 Jy/beam
! Clean residual mean=0.000002 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.771471 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 231 components and 0.771471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095255Jy  sigma=2.127537
! Fit after  self-cal, rms=0.095236Jy  sigma=2.127275
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095236Jy  sigma=2.127275
! Fit after  self-cal, rms=0.092838Jy  sigma=2.076950
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8392 mas, bmaj=0.9137 mas, bpa=-35.07 degrees
! Estimated noise=0.935239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.437117 Jy
! Component: 100  -  total flux cleaned = 0.561728 Jy
! Component: 150  -  total flux cleaned = 0.612384 Jy
! Component: 200  -  total flux cleaned = 0.640383 Jy
! Total flux subtracted in 200 components = 0.640383 Jy
! Clean residual min=-0.014610 max=0.018566 Jy/beam
! Clean residual mean=0.000073 rms=0.003441 Jy/beam
! Combined flux in latest and established models = 0.640383 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.640383 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.103 mas, bmaj=1.131 mas, bpa=34.53 degrees
! Estimated noise=0.44447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266699 Jy
! Component: 100  -  total flux cleaned = 0.0419781 Jy
! Component: 150  -  total flux cleaned = 0.0528474 Jy
! Component: 200  -  total flux cleaned = 0.0608356 Jy
! Total flux subtracted in 200 components = 0.0608356 Jy
! Clean residual min=-0.007745 max=0.008848 Jy/beam
! Clean residual mean=0.000053 rms=0.002224 Jy/beam
! Combined flux in latest and established models = 0.701219 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.701219 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.395 mas, bmaj=2.653 mas, bpa=26.18 degrees
! Estimated noise=0.560052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0078618 Jy
! Component: 100  -  total flux cleaned = 0.0137361 Jy
! Component: 150  -  total flux cleaned = 0.0184543 Jy
! Component: 200  -  total flux cleaned = 0.0228714 Jy
! Total flux subtracted in 200 components = 0.0228714 Jy
! Clean residual min=-0.006187 max=0.008199 Jy/beam
! Clean residual mean=0.000051 rms=0.002049 Jy/beam
! Combined flux in latest and established models = 0.72409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037498 Jy
! Component: 100  -  total flux cleaned = 0.00753109 Jy
! Component: 150  -  total flux cleaned = 0.0104262 Jy
! Component: 200  -  total flux cleaned = 0.0127495 Jy
! Total flux subtracted in 200 components = 0.0127495 Jy
! Clean residual min=-0.004887 max=0.005783 Jy/beam
! Clean residual mean=0.000028 rms=0.001503 Jy/beam
! Combined flux in latest and established models = 0.73684 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 111 components and 0.736839 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.103 mas, bmaj=1.131 mas, bpa=34.53 degrees
! Estimated noise=0.44447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231478 Jy
! Component: 100  -  total flux cleaned = 0.00399047 Jy
! Component: 150  -  total flux cleaned = 0.00534853 Jy
! Component: 200  -  total flux cleaned = 0.00608701 Jy
! Total flux subtracted in 200 components = 0.00608701 Jy
! Clean residual min=-0.004541 max=0.004594 Jy/beam
! Clean residual mean=0.000009 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.742926 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.742927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091395Jy  sigma=2.045490
! Fit after  self-cal, rms=0.091317Jy  sigma=2.043675
wmodel /J0909+4253_X_map.mod
! wmodel: Unable to open new model file: /J0909+4253_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0909+4253_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.103 x 1.131 at 34.53 degrees (North through East)
! Clean map  min=-0.004038  max=0.56533 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0909+4253_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.56533 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000985827 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.523142 0.523142 1.04628 2.09257 4.18514 8.37028 16.7406 33.4811 66.9622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.565 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  573.457 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0909+4253_X_dfm.log closed on Fri May 20 00:00:00 2016