! Started logfile: /scr/pima/bg219a_uvs/J0847-0703_X_dfm.log on Thu May 19 23:59:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0847-0703_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0847-0703_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.812169 visibilities/baseline/integration-bin.
! Found source: J0847-0703
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0847-0703_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.030467Jy  sigma=27.212256
! Fit after  self-cal, rms=0.752493Jy  sigma=19.703068
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6401 mas, bmaj=1.657 mas, bpa=-1.933 degrees
! Estimated noise=0.6753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.18116 Jy
! Component: 100  -  total flux cleaned = 0.230796 Jy
! Total flux subtracted in 100 components = 0.230796 Jy
! Clean residual min=-0.013606 max=0.021550 Jy/beam
! Clean residual mean=0.000023 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 0.230796 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.230796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080489Jy  sigma=2.094172
! Fit after  self-cal, rms=0.080439Jy  sigma=2.092750
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236291 Jy
! Component: 100  -  total flux cleaned = 0.0367872 Jy
! Total flux subtracted in 100 components = 0.0367872 Jy
! Clean residual min=-0.009479 max=0.013049 Jy/beam
! Clean residual mean=0.000013 rms=0.002239 Jy/beam
! Combined flux in latest and established models = 0.267584 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 24 components and 0.267584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069549Jy  sigma=1.790380
! Fit after  self-cal, rms=0.069545Jy  sigma=1.789700
! Inverting map 
! Added new window around map position (1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122678 Jy
! Component: 100  -  total flux cleaned = 0.0201223 Jy
! Total flux subtracted in 100 components = 0.0201223 Jy
! Clean residual min=-0.007485 max=0.007526 Jy/beam
! Clean residual mean=0.000009 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 0.287706 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.287706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066136Jy  sigma=1.693808
! Fit after  self-cal, rms=0.065994Jy  sigma=1.689942
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8058 mas, bmaj=1.944 mas, bpa=-1.731 degrees
! Estimated noise=0.342506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106796 Jy
! Component: 100  -  total flux cleaned = 0.0173888 Jy
! Component: 150  -  total flux cleaned = 0.0219506 Jy
! Component: 200  -  total flux cleaned = 0.025069 Jy
! Total flux subtracted in 200 components = 0.025069 Jy
! Clean residual min=-0.004514 max=0.005515 Jy/beam
! Clean residual mean=0.000008 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.312775 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 54 components and 0.312775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064072Jy  sigma=1.635382
! Fit after  self-cal, rms=0.063963Jy  sigma=1.631858
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8058 x 1.944 at -1.731 degrees (North through East)
! Clean map  min=-0.0040292  max=0.24303 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        0.98     NL        1.02     
!   OV        1.02     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.95     MK        1.01     NL        1.02     
!   OV        1.02     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.97     MK        1.02     NL        1.03     
!   OV        1.01     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.98     MK        0.99     NL        1.03     
!   OV        1.03     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.95     MK        1.01     NL        1.03     
!   OV        1.00     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        1.00     NL        1.03     
!   OV        1.00     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.96     MK        0.99     NL        1.02     
!   OV        1.01     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.00     NL        1.02     
!   OV        1.02     PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.94     MK        1.01     NL        1.05     
!   OV        1.01     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.95     MK        0.99     NL        1.03     
!   OV        1.03     PT        0.99     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.97     MK        0.96     NL        1.01     
!   OV        1.04     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.95     MK        1.00     NL        1.05     
!   OV        1.04     PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063963Jy  sigma=1.631858
! Fit after  self-cal, rms=0.063111Jy  sigma=1.615282
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.807 mas, bmaj=1.949 mas, bpa=-1.709 degrees
! Estimated noise=0.340655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000191761 Jy
! Component: 100  -  total flux cleaned = -9.23706e-05 Jy
! Component: 150  -  total flux cleaned = -3.47859e-05 Jy
! Component: 200  -  total flux cleaned = 1.59276e-05 Jy
! Total flux subtracted in 200 components = 1.59276e-05 Jy
! Clean residual min=-0.003192 max=0.003409 Jy/beam
! Clean residual mean=-0.000002 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.312791 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.312791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063072Jy  sigma=1.614430
! Fit after  self-cal, rms=0.063071Jy  sigma=1.614312
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063071Jy  sigma=1.614312
! Fit after  self-cal, rms=0.063019Jy  sigma=1.603365
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8069 mas, bmaj=1.952 mas, bpa=-1.752 degrees
! Estimated noise=0.340479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420109 Jy
! Component: 100  -  total flux cleaned = 0.00028569 Jy
! Component: 150  -  total flux cleaned = 0.000234074 Jy
! Component: 200  -  total flux cleaned = 0.000234623 Jy
! Total flux subtracted in 200 components = 0.000234623 Jy
! Clean residual min=-0.002162 max=0.002149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.313026 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 68 components and 0.313026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062982Jy  sigma=1.602315
! Fit after  self-cal, rms=0.062990Jy  sigma=1.602198
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202349 Jy
! Component: 100  -  total flux cleaned = 0.000224003 Jy
! Component: 150  -  total flux cleaned = 0.000224288 Jy
! Component: 200  -  total flux cleaned = 0.000276313 Jy
! Total flux subtracted in 200 components = 0.000276313 Jy
! Clean residual min=-0.002089 max=0.002118 Jy/beam
! Clean residual mean=-0.000001 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.313302 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.313302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062977Jy  sigma=1.601888
! Fit after  self-cal, rms=0.062976Jy  sigma=1.601858
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062976Jy  sigma=1.601858
! Fit after  self-cal, rms=0.063047Jy  sigma=1.601664
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8076 mas, bmaj=1.953 mas, bpa=-1.709 degrees
! Estimated noise=0.340589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.54193e-05 Jy
! Component: 100  -  total flux cleaned = -0.000115793 Jy
! Component: 150  -  total flux cleaned = -9.89713e-05 Jy
! Component: 200  -  total flux cleaned = -8.40406e-05 Jy
! Total flux subtracted in 200 components = -8.40406e-05 Jy
! Clean residual min=-0.002037 max=0.002066 Jy/beam
! Clean residual mean=-0.000000 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.313218 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 76 components and 0.313218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063034Jy  sigma=1.601327
! Fit after  self-cal, rms=0.063035Jy  sigma=1.601295
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145024 Jy
! Component: 100  -  total flux cleaned = 0.000159873 Jy
! Component: 150  -  total flux cleaned = 0.000173881 Jy
! Component: 200  -  total flux cleaned = 0.000186876 Jy
! Total flux subtracted in 200 components = 0.000186876 Jy
! Clean residual min=-0.002012 max=0.002041 Jy/beam
! Clean residual mean=-0.000000 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.313405 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 77 components and 0.313405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063028Jy  sigma=1.601137
! Fit after  self-cal, rms=0.063028Jy  sigma=1.601125
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063028Jy  sigma=1.601125
! Fit after  self-cal, rms=0.063066Jy  sigma=1.601051
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.126 mas, bmaj=4.139 mas, bpa=-1.208 degrees
! Estimated noise=0.455743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.68672e-05 Jy
! Component: 100  -  total flux cleaned = 6.16086e-05 Jy
! Component: 150  -  total flux cleaned = 8.7961e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102825 Jy
! Total flux subtracted in 200 components = 0.000102825 Jy
! Clean residual min=-0.002886 max=0.002625 Jy/beam
! Clean residual mean=-0.000001 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.313507 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 79 components and 0.313507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063068Jy  sigma=1.601118
! Fit after  self-cal, rms=0.063067Jy  sigma=1.601042
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.48933e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114271 Jy
! Component: 150  -  total flux cleaned = 0.000130132 Jy
! Component: 200  -  total flux cleaned = 0.000150092 Jy
! Total flux subtracted in 200 components = 0.000150092 Jy
! Clean residual min=-0.002875 max=0.002642 Jy/beam
! Clean residual mean=-0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.313658 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 80 components and 0.313658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063067Jy  sigma=1.601097
! Fit after  self-cal, rms=0.063067Jy  sigma=1.601070
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8081 mas, bmaj=1.954 mas, bpa=-1.672 degrees
! Estimated noise=0.340651 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8081 x 1.954 at -1.672 degrees (North through East)
! Clean map  min=-0.001855  max=0.24072 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6416 mas, bmaj=1.667 mas, bpa=-1.993 degrees
! Estimated noise=0.674716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180752 Jy
! Component: 100  -  total flux cleaned = 0.23036 Jy
! Component: 150  -  total flux cleaned = 0.255413 Jy
! Component: 200  -  total flux cleaned = 0.26971 Jy
! Total flux subtracted in 200 components = 0.26971 Jy
! Clean residual min=-0.007009 max=0.008312 Jy/beam
! Clean residual mean=0.000010 rms=0.001841 Jy/beam
! Combined flux in latest and established models = 0.26971 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.26971 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8081 mas, bmaj=1.954 mas, bpa=-1.672 degrees
! Estimated noise=0.340651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155396 Jy
! Component: 100  -  total flux cleaned = 0.0247711 Jy
! Component: 150  -  total flux cleaned = 0.0309347 Jy
! Component: 200  -  total flux cleaned = 0.0351141 Jy
! Total flux subtracted in 200 components = 0.0351141 Jy
! Clean residual min=-0.002886 max=0.003268 Jy/beam
! Clean residual mean=0.000004 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.304824 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 48 components and 0.304824 Jy
! Inverting map 
! Added new window around map position (7.4, -9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314516 Jy
! Component: 100  -  total flux cleaned = 0.00519868 Jy
! Component: 150  -  total flux cleaned = 0.00667478 Jy
! Component: 200  -  total flux cleaned = 0.00739214 Jy
! Total flux subtracted in 200 components = 0.00739214 Jy
! Clean residual min=-0.002055 max=0.002103 Jy/beam
! Clean residual mean=0.000000 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.312216 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 62 components and 0.312216 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.126 mas, bmaj=4.139 mas, bpa=-1.208 degrees
! Estimated noise=0.455743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011959 Jy
! Component: 100  -  total flux cleaned = 0.00128211 Jy
! Component: 150  -  total flux cleaned = 0.00135051 Jy
! Component: 200  -  total flux cleaned = 0.00138977 Jy
! Total flux subtracted in 200 components = 0.00138977 Jy
! Clean residual min=-0.002766 max=0.002642 Jy/beam
! Clean residual mean=-0.000001 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.313606 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.30977e-05 Jy
! Component: 100  -  total flux cleaned = 6.24801e-05 Jy
! Component: 150  -  total flux cleaned = 8.71161e-05 Jy
! Component: 200  -  total flux cleaned = 8.69078e-05 Jy
! Total flux subtracted in 200 components = 8.69078e-05 Jy
! Clean residual min=-0.002733 max=0.002668 Jy/beam
! Clean residual mean=-0.000001 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.313693 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 81 components and 0.313693 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8081 mas, bmaj=1.954 mas, bpa=-1.672 degrees
! Estimated noise=0.340651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000248576 Jy
! Component: 100  -  total flux cleaned = -0.00021642 Jy
! Component: 150  -  total flux cleaned = -0.000187286 Jy
! Component: 200  -  total flux cleaned = -0.00016028 Jy
! Total flux subtracted in 200 components = -0.00016028 Jy
! Clean residual min=-0.001927 max=0.002027 Jy/beam
! Clean residual mean=-0.000000 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.313532 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.313532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063051Jy  sigma=1.600579
! Fit after  self-cal, rms=0.063041Jy  sigma=1.600447
wmodel /J0847-0703_X_map.mod
! wmodel: Unable to open new model file: /J0847-0703_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0847-0703_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8081 x 1.954 at -1.672 degrees (North through East)
! Clean map  min=-0.0017358  max=0.24122 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0847-0703_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.241217 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000490738 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.610328 0.610328 1.22066 2.44131 4.88263 9.76526 19.5305 39.061 78.122
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.241 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  491.538 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0847-0703_X_dfm.log closed on Thu May 19 23:59:29 2016