! Started logfile: /scr/pima/bg219a_uvs/J0847-0520_S_dfm.log on Thu May 19 23:59:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0847-0520_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0847-0520_S_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.811224 visibilities/baseline/integration-bin.
! Found source: J0847-0520
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1908 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0847-0520_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014609Jy  sigma=22.193756
! Fit after  self-cal, rms=0.754023Jy  sigma=16.185711
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.539 mas, bmaj=6.815 mas, bpa=-3.846 degrees
! Estimated noise=1.08431 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194056 Jy
! Component: 100  -  total flux cleaned = 0.236409 Jy
! Total flux subtracted in 100 components = 0.236409 Jy
! Clean residual min=-0.009175 max=0.012646 Jy/beam
! Clean residual mean=-0.000007 rms=0.002677 Jy/beam
! Combined flux in latest and established models = 0.236409 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.236409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098643Jy  sigma=1.476522
! Fit after  self-cal, rms=0.098671Jy  sigma=1.476365
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.001 mas, bmaj=7.456 mas, bpa=-3.758 degrees
! Estimated noise=0.848984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172041 Jy
! Component: 100  -  total flux cleaned = 0.0254195 Jy
! Component: 150  -  total flux cleaned = 0.0298817 Jy
! Component: 200  -  total flux cleaned = 0.0323996 Jy
! Total flux subtracted in 200 components = 0.0323996 Jy
! Clean residual min=-0.007002 max=0.012086 Jy/beam
! Clean residual mean=-0.000008 rms=0.002508 Jy/beam
! Combined flux in latest and established models = 0.268809 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 33 components and 0.268809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096136Jy  sigma=1.392771
! Fit after  self-cal, rms=0.096173Jy  sigma=1.392202
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.001 x 7.456 at -3.758 degrees (North through East)
! Clean map  min=-0.0069489  max=0.25192 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.96     MK        1.03     NL        0.98     
!   OV        1.06     PT        0.96     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.96     MK        1.01     NL        1.01     
!   OV        1.03     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.91     MK        1.00     NL        0.93     
!   OV        1.08     PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.096173Jy  sigma=1.392202
! Fit after  self-cal, rms=0.093484Jy  sigma=1.367296
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=7.479 mas, bpa=-3.807 degrees
! Estimated noise=0.837754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00254106 Jy
! Component: 100  -  total flux cleaned = -0.00373432 Jy
! Component: 150  -  total flux cleaned = -0.00392531 Jy
! Component: 200  -  total flux cleaned = -0.00400577 Jy
! Total flux subtracted in 200 components = -0.00400577 Jy
! Clean residual min=-0.006057 max=0.008670 Jy/beam
! Clean residual mean=-0.000002 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 0.264803 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 50 components and 0.264803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093370Jy  sigma=1.364542
! Fit after  self-cal, rms=0.093383Jy  sigma=1.364402
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093383Jy  sigma=1.364402
! Fit after  self-cal, rms=0.093011Jy  sigma=1.353128
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=7.496 mas, bpa=-3.877 degrees
! Estimated noise=0.832247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00225792 Jy
! Component: 100  -  total flux cleaned = -0.00341393 Jy
! Component: 150  -  total flux cleaned = -0.00384228 Jy
! Component: 200  -  total flux cleaned = -0.00384405 Jy
! Total flux subtracted in 200 components = -0.00384405 Jy
! Clean residual min=-0.005663 max=0.007722 Jy/beam
! Clean residual mean=-0.000004 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 0.260959 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.260959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092915Jy  sigma=1.350944
! Fit after  self-cal, rms=0.092915Jy  sigma=1.350830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.47463e-05 Jy
! Component: 100  -  total flux cleaned = -1.1897e-05 Jy
! Component: 150  -  total flux cleaned = -1.19774e-05 Jy
! Component: 200  -  total flux cleaned = -1.17129e-05 Jy
! Total flux subtracted in 200 components = -1.17129e-05 Jy
! Clean residual min=-0.005684 max=0.007683 Jy/beam
! Clean residual mean=-0.000004 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.260947 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.260947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092902Jy  sigma=1.350605
! Fit after  self-cal, rms=0.092900Jy  sigma=1.350567
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092900Jy  sigma=1.350567
! Fit after  self-cal, rms=0.092788Jy  sigma=1.349546
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.035 mas, bmaj=7.512 mas, bpa=-3.887 degrees
! Estimated noise=0.827864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180568 Jy
! Component: 100  -  total flux cleaned = -0.00273269 Jy
! Component: 150  -  total flux cleaned = -0.00314511 Jy
! Component: 200  -  total flux cleaned = -0.00320331 Jy
! Total flux subtracted in 200 components = -0.00320331 Jy
! Clean residual min=-0.005652 max=0.007595 Jy/beam
! Clean residual mean=-0.000003 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.257744 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.257744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092720Jy  sigma=1.348032
! Fit after  self-cal, rms=0.092720Jy  sigma=1.347990
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.46337e-05 Jy
! Component: 100  -  total flux cleaned = -2.32196e-05 Jy
! Component: 150  -  total flux cleaned = -2.23337e-05 Jy
! Component: 200  -  total flux cleaned = -2.24652e-05 Jy
! Total flux subtracted in 200 components = -2.24652e-05 Jy
! Clean residual min=-0.005662 max=0.007575 Jy/beam
! Clean residual mean=-0.000003 rms=0.001870 Jy/beam
! Combined flux in latest and established models = 0.257721 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.257721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092713Jy  sigma=1.347847
! Fit after  self-cal, rms=0.092714Jy  sigma=1.347823
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092714Jy  sigma=1.347823
! Fit after  self-cal, rms=0.092615Jy  sigma=1.347091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.546 mas, bmaj=14.66 mas, bpa=-1.93 degrees
! Estimated noise=1.06311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00147116 Jy
! Component: 100  -  total flux cleaned = -0.00159283 Jy
! Component: 150  -  total flux cleaned = -0.001739 Jy
! Component: 200  -  total flux cleaned = -0.00181882 Jy
! Total flux subtracted in 200 components = -0.00181882 Jy
! Clean residual min=-0.006846 max=0.009735 Jy/beam
! Clean residual mean=-0.000003 rms=0.002833 Jy/beam
! Combined flux in latest and established models = 0.255902 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.255902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092596Jy  sigma=1.346933
! Fit after  self-cal, rms=0.092596Jy  sigma=1.346450
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.85655e-05 Jy
! Component: 100  -  total flux cleaned = -5.4354e-06 Jy
! Component: 150  -  total flux cleaned = -4.27748e-05 Jy
! Component: 200  -  total flux cleaned = -4.41258e-05 Jy
! Total flux subtracted in 200 components = -4.41258e-05 Jy
! Clean residual min=-0.006880 max=0.009684 Jy/beam
! Clean residual mean=-0.000004 rms=0.002819 Jy/beam
! Combined flux in latest and established models = 0.255858 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 69 components and 0.255858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092611Jy  sigma=1.347071
! Fit after  self-cal, rms=0.092606Jy  sigma=1.346758
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=7.525 mas, bpa=-3.881 degrees
! Estimated noise=0.824048 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.044 x 7.525 at -3.881 degrees (North through East)
! Clean map  min=-0.0055464  max=0.24382 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.566 mas, bmaj=6.842 mas, bpa=-3.91 degrees
! Estimated noise=1.06692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190856 Jy
! Component: 100  -  total flux cleaned = 0.232536 Jy
! Component: 150  -  total flux cleaned = 0.243213 Jy
! Component: 200  -  total flux cleaned = 0.248676 Jy
! Total flux subtracted in 200 components = 0.248676 Jy
! Clean residual min=-0.006453 max=0.007916 Jy/beam
! Clean residual mean=-0.000002 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.248676 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.248676 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=7.525 mas, bpa=-3.881 degrees
! Estimated noise=0.824048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00788832 Jy
! Component: 100  -  total flux cleaned = 0.0120708 Jy
! Component: 150  -  total flux cleaned = 0.0137357 Jy
! Component: 200  -  total flux cleaned = 0.0145654 Jy
! Total flux subtracted in 200 components = 0.0145654 Jy
! Clean residual min=-0.005712 max=0.006384 Jy/beam
! Clean residual mean=-0.000002 rms=0.001619 Jy/beam
! Combined flux in latest and established models = 0.263242 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 35 components and 0.263242 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.546 mas, bmaj=14.66 mas, bpa=-1.93 degrees
! Estimated noise=1.06311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020756 Jy
! Component: 100  -  total flux cleaned = 0.00220005 Jy
! Component: 150  -  total flux cleaned = 0.00236736 Jy
! Component: 200  -  total flux cleaned = 0.00252125 Jy
! Total flux subtracted in 200 components = 0.00252125 Jy
! Clean residual min=-0.008697 max=0.008485 Jy/beam
! Clean residual mean=-0.000000 rms=0.002435 Jy/beam
! Combined flux in latest and established models = 0.265763 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.52776e-05 Jy
! Component: 100  -  total flux cleaned = 0.00018478 Jy
! Component: 150  -  total flux cleaned = 0.000269371 Jy
! Component: 200  -  total flux cleaned = 0.000271024 Jy
! Total flux subtracted in 200 components = 0.000271024 Jy
! Clean residual min=-0.008565 max=0.008358 Jy/beam
! Clean residual mean=0.000001 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 0.266034 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 56 components and 0.266034 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=7.525 mas, bpa=-3.881 degrees
! Estimated noise=0.824048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265038 Jy
! Component: 100  -  total flux cleaned = 0.000413517 Jy
! Component: 150  -  total flux cleaned = 0.000412892 Jy
! Component: 200  -  total flux cleaned = 0.000355515 Jy
! Total flux subtracted in 200 components = 0.000355515 Jy
! Clean residual min=-0.005649 max=0.006252 Jy/beam
! Clean residual mean=-0.000001 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.266389 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.266389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091849Jy  sigma=1.328786
! Fit after  self-cal, rms=0.091781Jy  sigma=1.327697
wmodel /J0847-0520_S_map.mod
! wmodel: Unable to open new model file: /J0847-0520_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0847-0520_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.044 x 7.525 at -3.881 degrees (North through East)
! Clean map  min=-0.0053296  max=0.2426 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0847-0520_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.242599 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00155573 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.92383 1.92383 3.84767 7.69533 15.3907 30.7813 61.5627
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0046 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.242 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  155.938 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0847-0520_S_dfm.log closed on Thu May 19 23:59:18 2016