! Started logfile: /scr/pima/bg219a_uvs/J0817+5537_S_dfm.log on Thu May 19 23:59:00 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J0817+5537_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J0817+5537_S_uva.fits ! AN table 1: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.826531 visibilities/baseline/integration-bin. ! Found source: J0817+5537 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1944 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0817+5537_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007934Jy sigma=24.576127 ! Fit after self-cal, rms=0.864592Jy sigma=21.070168 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=4.459 mas, bpa=-67.68 degrees ! Estimated noise=1.03139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105316 Jy ! Component: 100 - total flux cleaned = 0.13061 Jy ! Total flux subtracted in 100 components = 0.13061 Jy ! Clean residual min=-0.007869 max=0.009632 Jy/beam ! Clean residual mean=-0.000183 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.13061 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.13061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056499Jy sigma=1.245560 ! Fit after self-cal, rms=0.056496Jy sigma=1.245025 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=5.206 mas, bpa=-71.82 degrees ! Estimated noise=0.739332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977383 Jy ! Component: 100 - total flux cleaned = 0.013742 Jy ! Component: 150 - total flux cleaned = 0.015863 Jy ! Component: 200 - total flux cleaned = 0.0169662 Jy ! Total flux subtracted in 200 components = 0.0169662 Jy ! Clean residual min=-0.004753 max=0.005397 Jy/beam ! Clean residual mean=-0.000106 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.147576 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.147576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054841Jy sigma=1.207597 ! Fit after self-cal, rms=0.054836Jy sigma=1.207240 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.53 x 5.206 at -71.82 degrees (North through East) ! Clean map min=-0.00464 max=0.13335 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 LA 1.01 MK 0.99 NL 1.06 ! OV 1.01 PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 LA 1.01 MK 1.03 NL 1.08 ! OV 0.97 PT 1.01 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 LA 1.00 MK 1.04 NL 1.03 ! OV 1.01 PT 1.02 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.85 LA 0.97 MK 1.08 NL 1.02 ! OV 1.03 PT 0.97 SC 0.91 ! ! ! Fit before self-cal, rms=0.054836Jy sigma=1.207240 ! Fit after self-cal, rms=0.052816Jy sigma=1.189557 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=5.159 mas, bpa=-72.95 degrees ! Estimated noise=0.735982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140243 Jy ! Component: 100 - total flux cleaned = 0.000270624 Jy ! Component: 150 - total flux cleaned = 0.000386366 Jy ! Component: 200 - total flux cleaned = 0.000456554 Jy ! Total flux subtracted in 200 components = 0.000456554 Jy ! Clean residual min=-0.004366 max=0.004796 Jy/beam ! Clean residual mean=-0.000089 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.148032 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.148032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052748Jy sigma=1.188175 ! Fit after self-cal, rms=0.052719Jy sigma=1.187924 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052719Jy sigma=1.187924 ! Fit after self-cal, rms=0.052701Jy sigma=1.182925 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=5.169 mas, bpa=-72.27 degrees ! Estimated noise=0.736296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329473 Jy ! Component: 100 - total flux cleaned = 0.000413832 Jy ! Component: 150 - total flux cleaned = 0.000485702 Jy ! Component: 200 - total flux cleaned = 0.000529249 Jy ! Total flux subtracted in 200 components = 0.000529249 Jy ! Clean residual min=-0.004013 max=0.004635 Jy/beam ! Clean residual mean=-0.000079 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.148562 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.148562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052672Jy sigma=1.182231 ! Fit after self-cal, rms=0.052680Jy sigma=1.182110 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332676 Jy ! Component: 100 - total flux cleaned = 0.00425357 Jy ! Component: 150 - total flux cleaned = 0.0045024 Jy ! Component: 200 - total flux cleaned = 0.00469673 Jy ! Total flux subtracted in 200 components = 0.00469673 Jy ! Clean residual min=-0.003346 max=0.003215 Jy/beam ! Clean residual mean=-0.000053 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.153258 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 0.153258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052207Jy sigma=1.170538 ! Fit after self-cal, rms=0.052176Jy sigma=1.169908 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052176Jy sigma=1.169908 ! Fit after self-cal, rms=0.051923Jy sigma=1.169287 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=5.18 mas, bpa=-71.95 degrees ! Estimated noise=0.7333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978693 Jy ! Component: 100 - total flux cleaned = 0.00112969 Jy ! Component: 150 - total flux cleaned = 0.0012515 Jy ! Component: 200 - total flux cleaned = 0.00141302 Jy ! Total flux subtracted in 200 components = 0.00141302 Jy ! Clean residual min=-0.003116 max=0.003095 Jy/beam ! Clean residual mean=-0.000039 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.154671 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.154671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051838Jy sigma=1.167339 ! Fit after self-cal, rms=0.051834Jy sigma=1.167238 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328905 Jy ! Component: 100 - total flux cleaned = 0.000510344 Jy ! Component: 150 - total flux cleaned = 0.000577345 Jy ! Component: 200 - total flux cleaned = 0.000657127 Jy ! Total flux subtracted in 200 components = 0.000657127 Jy ! Clean residual min=-0.003089 max=0.003094 Jy/beam ! Clean residual mean=-0.000036 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.155328 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.155328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051811Jy sigma=1.166806 ! Fit after self-cal, rms=0.051810Jy sigma=1.166784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051810Jy sigma=1.166784 ! Fit after self-cal, rms=0.051776Jy sigma=1.166659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.927 mas, bmaj=11.31 mas, bpa=-84.52 degrees ! Estimated noise=0.891591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010328 Jy ! Component: 100 - total flux cleaned = 0.00126007 Jy ! Component: 150 - total flux cleaned = 0.0013027 Jy ! Component: 200 - total flux cleaned = 0.00132148 Jy ! Total flux subtracted in 200 components = 0.00132148 Jy ! Clean residual min=-0.003284 max=0.002872 Jy/beam ! Clean residual mean=-0.000057 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.15665 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.15665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051772Jy sigma=1.166718 ! Fit after self-cal, rms=0.051773Jy sigma=1.166652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02239e-05 Jy ! Component: 100 - total flux cleaned = 8.77989e-05 Jy ! Component: 150 - total flux cleaned = 0.000102508 Jy ! Component: 200 - total flux cleaned = 0.000130314 Jy ! Total flux subtracted in 200 components = 0.000130314 Jy ! Clean residual min=-0.003288 max=0.002871 Jy/beam ! Clean residual mean=-0.000057 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.15678 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.15678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051776Jy sigma=1.166847 ! Fit after self-cal, rms=0.051776Jy sigma=1.166801 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.181 mas, bpa=-71.99 degrees ! Estimated noise=0.733261 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 5.181 at -71.99 degrees (North through East) ! Clean map min=-0.0036469 max=0.13183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=4.443 mas, bpa=-68.1 degrees ! Estimated noise=1.02011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1041 Jy ! Component: 100 - total flux cleaned = 0.129527 Jy ! Component: 150 - total flux cleaned = 0.136937 Jy ! Component: 200 - total flux cleaned = 0.14072 Jy ! Total flux subtracted in 200 components = 0.14072 Jy ! Clean residual min=-0.005243 max=0.005270 Jy/beam ! Clean residual mean=-0.000105 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.14072 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.14072 Jy ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.181 mas, bpa=-71.99 degrees ! Estimated noise=0.733261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544237 Jy ! Component: 100 - total flux cleaned = 0.00910674 Jy ! Component: 150 - total flux cleaned = 0.0119221 Jy ! Component: 200 - total flux cleaned = 0.0131135 Jy ! Total flux subtracted in 200 components = 0.0131135 Jy ! Clean residual min=-0.003344 max=0.002891 Jy/beam ! Clean residual mean=-0.000043 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.153833 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 0.153833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.927 mas, bmaj=11.31 mas, bpa=-84.52 degrees ! Estimated noise=0.891591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247119 Jy ! Component: 100 - total flux cleaned = 0.00317721 Jy ! Component: 150 - total flux cleaned = 0.0035265 Jy ! Component: 200 - total flux cleaned = 0.00380835 Jy ! Total flux subtracted in 200 components = 0.00380835 Jy ! Clean residual min=-0.003039 max=0.002751 Jy/beam ! Clean residual mean=-0.000061 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.157642 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132817 Jy ! Component: 100 - total flux cleaned = 0.000162832 Jy ! Component: 150 - total flux cleaned = 0.000163546 Jy ! Component: 200 - total flux cleaned = 0.00016521 Jy ! Total flux subtracted in 200 components = 0.00016521 Jy ! Clean residual min=-0.002943 max=0.002639 Jy/beam ! Clean residual mean=-0.000060 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.157807 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 104 components and 0.157807 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=5.181 mas, bpa=-71.99 degrees ! Estimated noise=0.733261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000647978 Jy ! Component: 100 - total flux cleaned = -0.000697081 Jy ! Component: 150 - total flux cleaned = -0.000743394 Jy ! Component: 200 - total flux cleaned = -0.000742385 Jy ! Total flux subtracted in 200 components = -0.000742385 Jy ! Clean residual min=-0.002861 max=0.002774 Jy/beam ! Clean residual mean=-0.000032 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.157065 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.157065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051688Jy sigma=1.164864 ! Fit after self-cal, rms=0.051652Jy sigma=1.164150 wmodel /J0817+5537_S_map.mod ! wmodel: Unable to open new model file: /J0817+5537_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J0817+5537_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 5.181 at -71.99 degrees (North through East) ! Clean map min=-0.0029388 max=0.13217 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0817+5537_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.132169 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00065856 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49481 1.49481 2.98963 5.97926 11.9585 23.917 47.8341 95.6681 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.132 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 200.693 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J0817+5537_S_dfm.log closed on Thu May 19 23:59:03 2016