! Started logfile: /scr/pima/bg219a_uvs/J0808+4950_X_dfm.log on Thu May 19 23:58:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0808+4950_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0808+4950_X_uva.fits
! AN table 1: 27 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.513228 visibilities/baseline/integration-bin.
! Found source: J0808+4950
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 3492 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0808+4950_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.117042Jy  sigma=25.607422
! Fit after  self-cal, rms=0.463649Jy  sigma=10.688398
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6681 mas, bmaj=1.536 mas, bpa=-51.86 degrees
! Estimated noise=1.00771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.417672 Jy
! Component: 100  -  total flux cleaned = 0.508758 Jy
! Total flux subtracted in 100 components = 0.508758 Jy
! Clean residual min=-0.017898 max=0.025830 Jy/beam
! Clean residual mean=0.000087 rms=0.004228 Jy/beam
! Combined flux in latest and established models = 0.508758 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.508758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122972Jy  sigma=2.845001
! Fit after  self-cal, rms=0.122964Jy  sigma=2.844924
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268902 Jy
! Component: 100  -  total flux cleaned = 0.0421553 Jy
! Total flux subtracted in 100 components = 0.0421553 Jy
! Clean residual min=-0.013596 max=0.013044 Jy/beam
! Clean residual mean=0.000051 rms=0.002717 Jy/beam
! Combined flux in latest and established models = 0.550914 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.550914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113156Jy  sigma=2.619066
! Fit after  self-cal, rms=0.113149Jy  sigma=2.618395
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9188 mas, bmaj=1.835 mas, bpa=-56.34 degrees
! Estimated noise=0.564804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193863 Jy
! Component: 100  -  total flux cleaned = 0.0304224 Jy
! Component: 150  -  total flux cleaned = 0.0368247 Jy
! Component: 200  -  total flux cleaned = 0.040588 Jy
! Total flux subtracted in 200 components = 0.040588 Jy
! Clean residual min=-0.011333 max=0.011678 Jy/beam
! Clean residual mean=0.000058 rms=0.002838 Jy/beam
! Combined flux in latest and established models = 0.591502 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.591502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109736Jy  sigma=2.542899
! Fit after  self-cal, rms=0.109700Jy  sigma=2.541996
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9188 x 1.835 at -56.34 degrees (North through East)
! Clean map  min=-0.010473  max=0.5405 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.98     MK        0.99     NL        1.06     
!   OV        1.04     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        1.00     NL        1.04     
!   OV        1.03     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.98     MK        1.00     NL        1.06     
!   OV        1.01     PT        0.95     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.99     MK        0.99     NL        1.06     
!   OV        1.00     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.98     MK        1.00     NL        1.07     
!   OV        1.00     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.00     NL        1.06     
!   OV        0.99     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        1.00     NL        1.06     
!   OV        1.00     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.03     NL        1.04     
!   OV        1.01     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.02     NL        1.05     
!   OV        1.03     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.98     MK        1.03     NL        1.05     
!   OV        1.00     PT        0.95     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.00     NL        1.03     
!   OV        1.02     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.97     MK        0.99     NL        1.05     
!   OV        1.01     PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.109700Jy  sigma=2.541996
! Fit after  self-cal, rms=0.107597Jy  sigma=2.493883
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9216 mas, bmaj=1.828 mas, bpa=-56.35 degrees
! Estimated noise=0.5639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130723 Jy
! Component: 100  -  total flux cleaned = 6.97531e-06 Jy
! Component: 150  -  total flux cleaned = -4.39512e-05 Jy
! Component: 200  -  total flux cleaned = -0.000141028 Jy
! Total flux subtracted in 200 components = -0.000141028 Jy
! Clean residual min=-0.007862 max=0.006842 Jy/beam
! Clean residual mean=-0.000048 rms=0.001835 Jy/beam
! Combined flux in latest and established models = 0.591361 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.591361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107520Jy  sigma=2.492664
! Fit after  self-cal, rms=0.107497Jy  sigma=2.492438
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107497Jy  sigma=2.492438
! Fit after  self-cal, rms=0.106640Jy  sigma=2.474293
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9212 mas, bmaj=1.832 mas, bpa=-56.27 degrees
! Estimated noise=0.564056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256827 Jy
! Component: 100  -  total flux cleaned = 0.000539259 Jy
! Component: 150  -  total flux cleaned = 0.000536614 Jy
! Component: 200  -  total flux cleaned = 0.000579413 Jy
! Total flux subtracted in 200 components = 0.000579413 Jy
! Clean residual min=-0.006305 max=0.007055 Jy/beam
! Clean residual mean=0.000010 rms=0.001505 Jy/beam
! Combined flux in latest and established models = 0.59194 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.59194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106580Jy  sigma=2.473374
! Fit after  self-cal, rms=0.106578Jy  sigma=2.473274
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.6, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546297 Jy
! Component: 100  -  total flux cleaned = 0.00667236 Jy
! Component: 150  -  total flux cleaned = 0.007902 Jy
! Component: 200  -  total flux cleaned = 0.00882677 Jy
! Total flux subtracted in 200 components = 0.00882677 Jy
! Clean residual min=-0.004898 max=0.004774 Jy/beam
! Clean residual mean=-0.000002 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.600767 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.600767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106144Jy  sigma=2.464657
! Fit after  self-cal, rms=0.106126Jy  sigma=2.464174
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106126Jy  sigma=2.464174
! Fit after  self-cal, rms=0.105672Jy  sigma=2.463094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9212 mas, bmaj=1.832 mas, bpa=-56.23 degrees
! Estimated noise=0.562953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141785 Jy
! Component: 100  -  total flux cleaned = 0.00201665 Jy
! Component: 150  -  total flux cleaned = 0.00214009 Jy
! Component: 200  -  total flux cleaned = 0.00230396 Jy
! Total flux subtracted in 200 components = 0.00230396 Jy
! Clean residual min=-0.004028 max=0.004554 Jy/beam
! Clean residual mean=-0.000012 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.603071 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 0.603071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105560Jy  sigma=2.460939
! Fit after  self-cal, rms=0.105551Jy  sigma=2.460755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114838 Jy
! Component: 100  -  total flux cleaned = -1.57778e-05 Jy
! Component: 150  -  total flux cleaned = 0.000165909 Jy
! Component: 200  -  total flux cleaned = 0.000290042 Jy
! Total flux subtracted in 200 components = 0.000290042 Jy
! Clean residual min=-0.003950 max=0.004196 Jy/beam
! Clean residual mean=-0.000011 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.603361 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.603361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105506Jy  sigma=2.459949
! Fit after  self-cal, rms=0.105503Jy  sigma=2.459873
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105503Jy  sigma=2.459873
! Fit after  self-cal, rms=0.105264Jy  sigma=2.459408
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.369 mas, bmaj=3.678 mas, bpa=-57.83 degrees
! Estimated noise=0.715287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.2698e-05 Jy
! Component: 100  -  total flux cleaned = -7.53643e-06 Jy
! Component: 150  -  total flux cleaned = -8.98799e-05 Jy
! Component: 200  -  total flux cleaned = -0.000122648 Jy
! Total flux subtracted in 200 components = -0.000122648 Jy
! Clean residual min=-0.004313 max=0.005233 Jy/beam
! Clean residual mean=-0.000023 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.603238 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.603238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105242Jy  sigma=2.458961
! Fit after  self-cal, rms=0.105236Jy  sigma=2.458830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.68986e-05 Jy
! Component: 100  -  total flux cleaned = -6.47707e-05 Jy
! Component: 150  -  total flux cleaned = -9.91416e-05 Jy
! Component: 200  -  total flux cleaned = -0.000189589 Jy
! Total flux subtracted in 200 components = -0.000189589 Jy
! Clean residual min=-0.004212 max=0.004912 Jy/beam
! Clean residual mean=-0.000020 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 0.603049 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.603049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105229Jy  sigma=2.458644
! Fit after  self-cal, rms=0.105227Jy  sigma=2.458591
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9208 mas, bmaj=1.833 mas, bpa=-56.19 degrees
! Estimated noise=0.562376 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9208 x 1.833 at -56.19 degrees (North through East)
! Clean map  min=-0.0061292  max=0.54033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105227Jy  sigma=2.458591
! Fit after  self-cal, rms=0.097143Jy  sigma=2.279522
! Inverting map and beam 
! Estimated beam: bmin=0.9235 mas, bmaj=1.831 mas, bpa=-56.31 degrees
! Estimated noise=0.536852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0192559 Jy
! Component: 100  -  total flux cleaned = -0.0229187 Jy
! Component: 150  -  total flux cleaned = -0.0238743 Jy
! Component: 200  -  total flux cleaned = -0.0241693 Jy
! Total flux subtracted in 200 components = -0.0241693 Jy
! Clean residual min=-0.004236 max=0.005877 Jy/beam
! Clean residual mean=0.000024 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.578879 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.578879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093573Jy  sigma=2.201926
! Fit after  self-cal, rms=0.093568Jy  sigma=2.201809
! Inverting map 
! Added new window around map position (35.8, -31.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00495778 Jy
! Component: 100  -  total flux cleaned = 0.00537874 Jy
! Component: 150  -  total flux cleaned = 0.00554252 Jy
! Component: 200  -  total flux cleaned = 0.00583314 Jy
! Total flux subtracted in 200 components = 0.00583314 Jy
! Clean residual min=-0.003423 max=0.004238 Jy/beam
! Clean residual mean=0.000033 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.584712 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.584712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093230Jy  sigma=2.195978
! Fit after  self-cal, rms=0.093204Jy  sigma=2.195249
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093204Jy  sigma=2.195249
! Fit after  self-cal, rms=0.089859Jy  sigma=2.122661
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6741 mas, bmaj=1.526 mas, bpa=-51.89 degrees
! Estimated noise=0.924786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.383273 Jy
! Component: 100  -  total flux cleaned = 0.466851 Jy
! Component: 150  -  total flux cleaned = 0.489587 Jy
! Component: 200  -  total flux cleaned = 0.501244 Jy
! Total flux subtracted in 200 components = 0.501244 Jy
! Clean residual min=-0.010788 max=0.010873 Jy/beam
! Clean residual mean=0.000046 rms=0.002412 Jy/beam
! Combined flux in latest and established models = 0.501244 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.501244 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=1.832 mas, bpa=-56.34 degrees
! Estimated noise=0.516244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183027 Jy
! Component: 100  -  total flux cleaned = 0.0296489 Jy
! Component: 150  -  total flux cleaned = 0.0372203 Jy
! Component: 200  -  total flux cleaned = 0.0419474 Jy
! Total flux subtracted in 200 components = 0.0419474 Jy
! Clean residual min=-0.006677 max=0.008545 Jy/beam
! Clean residual mean=0.000069 rms=0.001762 Jy/beam
! Combined flux in latest and established models = 0.543192 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 0.543192 Jy
! Inverting map 
! Added new window around map position (-4.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00682974 Jy
! Component: 100  -  total flux cleaned = 0.00900396 Jy
! Component: 150  -  total flux cleaned = 0.0103378 Jy
! Component: 200  -  total flux cleaned = 0.0116362 Jy
! Total flux subtracted in 200 components = 0.0116362 Jy
! Clean residual min=-0.004995 max=0.005269 Jy/beam
! Clean residual mean=0.000049 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.554828 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 58 components and 0.554828 Jy
! Inverting map 
! Added new window around map position (4.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428003 Jy
! Component: 100  -  total flux cleaned = 0.00510184 Jy
! Component: 150  -  total flux cleaned = 0.00550774 Jy
! Component: 200  -  total flux cleaned = 0.00586279 Jy
! Total flux subtracted in 200 components = 0.00586279 Jy
! Clean residual min=-0.004364 max=0.003192 Jy/beam
! Clean residual mean=0.000037 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.560691 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 88 components and 0.560691 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.365 mas, bmaj=3.687 mas, bpa=-57.39 degrees
! Estimated noise=0.655437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199582 Jy
! Component: 100  -  total flux cleaned = 0.00254619 Jy
! Component: 150  -  total flux cleaned = 0.0026817 Jy
! Component: 200  -  total flux cleaned = 0.00273936 Jy
! Total flux subtracted in 200 components = 0.00273936 Jy
! Clean residual min=-0.004582 max=0.004265 Jy/beam
! Clean residual mean=0.000075 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.56343 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.12575e-05 Jy
! Component: 100  -  total flux cleaned = -5.21183e-05 Jy
! Component: 150  -  total flux cleaned = -0.000143088 Jy
! Component: 200  -  total flux cleaned = -0.000186045 Jy
! Total flux subtracted in 200 components = -0.000186045 Jy
! Clean residual min=-0.004108 max=0.004183 Jy/beam
! Clean residual mean=0.000072 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.563244 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 138 components and 0.563244 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=1.832 mas, bpa=-56.34 degrees
! Estimated noise=0.516244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113532 Jy
! Component: 100  -  total flux cleaned = -0.00130234 Jy
! Component: 150  -  total flux cleaned = -0.00130303 Jy
! Component: 200  -  total flux cleaned = -0.00125856 Jy
! Total flux subtracted in 200 components = -0.00125856 Jy
! Clean residual min=-0.002960 max=0.002907 Jy/beam
! Clean residual mean=0.000038 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.561985 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 154 components and 0.561985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086201Jy  sigma=2.053926
! Fit after  self-cal, rms=0.086183Jy  sigma=2.053395
wmodel /J0808+4950_X_map.mod
! wmodel: Unable to open new model file: /J0808+4950_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0808+4950_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9251 x 1.832 at -56.34 degrees (North through East)
! Clean map  min=-0.0060659  max=0.49117 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0808+4950_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.491169 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000711655 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.434671 0.434671 0.869341 1.73868 3.47736 6.95473 13.9095 27.8189 55.6378
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.491 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  690.177 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0808+4950_X_dfm.log closed on Thu May 19 23:58:45 2016