! Started logfile: /scr/pima/bg219a_uvs/J0800-2302_X_dfm.log on Thu May 19 23:58:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J0800-2302_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0800-2302_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J0800-2302
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6552 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0800-2302_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005154Jy  sigma=27.380762
! Fit after  self-cal, rms=0.915117Jy  sigma=24.842232
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5436 mas, bmaj=1.686 mas, bpa=5.45 degrees
! Estimated noise=0.613387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620778 Jy
! Component: 100  -  total flux cleaned = 0.0781425 Jy
! Total flux subtracted in 100 components = 0.0781425 Jy
! Clean residual min=-0.004350 max=0.007261 Jy/beam
! Clean residual mean=-0.000002 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.0781425 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0781425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051649Jy  sigma=1.375280
! Fit after  self-cal, rms=0.051521Jy  sigma=1.371063
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00810569 Jy
! Component: 100  -  total flux cleaned = 0.0127279 Jy
! Total flux subtracted in 100 components = 0.0127279 Jy
! Clean residual min=-0.003065 max=0.003852 Jy/beam
! Clean residual mean=-0.000001 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.0908704 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.0908704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049550Jy  sigma=1.308935
! Fit after  self-cal, rms=0.049573Jy  sigma=1.308486
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7212 mas, bmaj=1.992 mas, bpa=4.507 degrees
! Estimated noise=0.336804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528068 Jy
! Component: 100  -  total flux cleaned = 0.00795621 Jy
! Component: 150  -  total flux cleaned = 0.00938729 Jy
! Component: 200  -  total flux cleaned = 0.0101594 Jy
! Total flux subtracted in 200 components = 0.0101594 Jy
! Clean residual min=-0.002327 max=0.002764 Jy/beam
! Clean residual mean=-0.000004 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.10103 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 31 components and 0.10103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049076Jy  sigma=1.293086
! Fit after  self-cal, rms=0.049100Jy  sigma=1.292910
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7212 x 1.992 at 4.507 degrees (North through East)
! Clean map  min=-0.002247  max=0.086147 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.06     OV        1.10     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.05     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        1.07     OV        1.07     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.94     NL        1.05     OV        1.07     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        1.01     OV        0.99     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.97     NL        0.97     OV        1.06     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.01     OV        1.07     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.11     NL        0.94     OV        1.05     
!   PT        0.93     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        0.98     OV        1.02     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        0.98     NL        0.95     OV        1.05     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.96     NL        0.98     OV        1.00     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.049100Jy  sigma=1.292910
! Fit after  self-cal, rms=0.048976Jy  sigma=1.285983
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7242 mas, bmaj=2 mas, bpa=4.448 degrees
! Estimated noise=0.336645 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000216608 Jy
! Component: 100  -  total flux cleaned = -0.000251835 Jy
! Component: 150  -  total flux cleaned = -0.000242657 Jy
! Component: 200  -  total flux cleaned = -0.000242594 Jy
! Total flux subtracted in 200 components = -0.000242594 Jy
! Clean residual min=-0.001903 max=0.002419 Jy/beam
! Clean residual mean=-0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.100787 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 34 components and 0.100787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048972Jy  sigma=1.285838
! Fit after  self-cal, rms=0.048986Jy  sigma=1.285649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048986Jy  sigma=1.285649
! Fit after  self-cal, rms=0.048969Jy  sigma=1.281489
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7234 mas, bmaj=2.002 mas, bpa=4.499 degrees
! Estimated noise=0.336619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.474e-05 Jy
! Component: 100  -  total flux cleaned = 7.62257e-06 Jy
! Component: 150  -  total flux cleaned = 7.76834e-06 Jy
! Component: 200  -  total flux cleaned = 1.62832e-06 Jy
! Total flux subtracted in 200 components = 1.62832e-06 Jy
! Clean residual min=-0.001803 max=0.001910 Jy/beam
! Clean residual mean=-0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.100789 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 36 components and 0.100789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048967Jy  sigma=1.281429
! Fit after  self-cal, rms=0.048979Jy  sigma=1.281318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.08972e-05 Jy
! Component: 100  -  total flux cleaned = 4.14581e-06 Jy
! Component: 150  -  total flux cleaned = -1.71688e-06 Jy
! Component: 200  -  total flux cleaned = -1.87161e-06 Jy
! Total flux subtracted in 200 components = -1.87161e-06 Jy
! Clean residual min=-0.001796 max=0.001900 Jy/beam
! Clean residual mean=-0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.100787 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.100787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048978Jy  sigma=1.281271
! Fit after  self-cal, rms=0.048978Jy  sigma=1.281263
! Inverting map 
! Added new window around map position (-29.2, -48.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169931 Jy
! Component: 100  -  total flux cleaned = 0.00257148 Jy
! Component: 150  -  total flux cleaned = 0.00302547 Jy
! Component: 200  -  total flux cleaned = 0.00332955 Jy
! Total flux subtracted in 200 components = 0.00332955 Jy
! Clean residual min=-0.001544 max=0.001446 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.104116 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.104116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048916Jy  sigma=1.279598
! Fit after  self-cal, rms=0.048911Jy  sigma=1.279422
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048911Jy  sigma=1.279422
! Fit after  self-cal, rms=0.048827Jy  sigma=1.279232
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7241 mas, bmaj=2.004 mas, bpa=4.492 degrees
! Estimated noise=0.335714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00076054 Jy
! Component: 100  -  total flux cleaned = 0.00119921 Jy
! Component: 150  -  total flux cleaned = 0.00134611 Jy
! Component: 200  -  total flux cleaned = 0.00144866 Jy
! Total flux subtracted in 200 components = 0.00144866 Jy
! Clean residual min=-0.001377 max=0.001391 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.105565 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.105565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048813Jy  sigma=1.278854
! Fit after  self-cal, rms=0.048814Jy  sigma=1.278812
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028644 Jy
! Component: 100  -  total flux cleaned = 0.000383771 Jy
! Component: 150  -  total flux cleaned = 0.000441487 Jy
! Component: 200  -  total flux cleaned = 0.000467799 Jy
! Total flux subtracted in 200 components = 0.000467799 Jy
! Clean residual min=-0.001342 max=0.001374 Jy/beam
! Clean residual mean=-0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.106033 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.106033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048810Jy  sigma=1.278707
! Fit after  self-cal, rms=0.048811Jy  sigma=1.278699
! Inverting map 
! Added new window around map position (16.6, -50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000683092 Jy
! Component: 100  -  total flux cleaned = 0.000511465 Jy
! Component: 150  -  total flux cleaned = 0.00040629 Jy
! Component: 200  -  total flux cleaned = 0.000391432 Jy
! Total flux subtracted in 200 components = 0.000391432 Jy
! Clean residual min=-0.001434 max=0.001139 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.106424 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.106424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048779Jy  sigma=1.277902
! Fit after  self-cal, rms=0.048777Jy  sigma=1.277843
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048777Jy  sigma=1.277843
! Fit after  self-cal, rms=0.048742Jy  sigma=1.277742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.967 mas, bmaj=5.399 mas, bpa=-0.1552 degrees
! Estimated noise=0.458778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293047 Jy
! Component: 100  -  total flux cleaned = 0.000348404 Jy
! Component: 150  -  total flux cleaned = 0.00039427 Jy
! Component: 200  -  total flux cleaned = 0.000420611 Jy
! Total flux subtracted in 200 components = 0.000420611 Jy
! Clean residual min=-0.000910 max=0.001001 Jy/beam
! Clean residual mean=-0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.106845 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 93 components and 0.106845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048739Jy  sigma=1.277667
! Fit after  self-cal, rms=0.048740Jy  sigma=1.277650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.31952e-05 Jy
! Component: 100  -  total flux cleaned = 9.26389e-05 Jy
! Component: 150  -  total flux cleaned = 8.63373e-05 Jy
! Component: 200  -  total flux cleaned = 8.6476e-05 Jy
! Total flux subtracted in 200 components = 8.6476e-05 Jy
! Clean residual min=-0.000911 max=0.000986 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.106931 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 97 components and 0.106931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048740Jy  sigma=1.277630
! Fit after  self-cal, rms=0.048739Jy  sigma=1.277625
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7243 mas, bmaj=2.005 mas, bpa=4.459 degrees
! Estimated noise=0.335235 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7243 x 2.005 at 4.459 degrees (North through East)
! Clean map  min=-0.0011753  max=0.086361 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5442 mas, bmaj=1.695 mas, bpa=5.376 degrees
! Estimated noise=0.615561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620458 Jy
! Component: 100  -  total flux cleaned = 0.0783412 Jy
! Component: 150  -  total flux cleaned = 0.0865304 Jy
! Component: 200  -  total flux cleaned = 0.0911963 Jy
! Total flux subtracted in 200 components = 0.0911963 Jy
! Clean residual min=-0.002636 max=0.003012 Jy/beam
! Clean residual mean=-0.000001 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.0911963 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0911963 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7243 mas, bmaj=2.005 mas, bpa=4.459 degrees
! Estimated noise=0.335235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451849 Jy
! Component: 100  -  total flux cleaned = 0.00699791 Jy
! Component: 150  -  total flux cleaned = 0.00887145 Jy
! Component: 200  -  total flux cleaned = 0.0103912 Jy
! Total flux subtracted in 200 components = 0.0103912 Jy
! Clean residual min=-0.001871 max=0.001575 Jy/beam
! Clean residual mean=-0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.101587 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 40 components and 0.101587 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.967 mas, bmaj=5.399 mas, bpa=-0.1552 degrees
! Estimated noise=0.458778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210769 Jy
! Component: 100  -  total flux cleaned = 0.00325989 Jy
! Component: 150  -  total flux cleaned = 0.00398317 Jy
! Component: 200  -  total flux cleaned = 0.00447074 Jy
! Total flux subtracted in 200 components = 0.00447074 Jy
! Clean residual min=-0.001134 max=0.001296 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.106058 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358477 Jy
! Component: 100  -  total flux cleaned = 0.000493798 Jy
! Component: 150  -  total flux cleaned = 0.000581032 Jy
! Component: 200  -  total flux cleaned = 0.0006067 Jy
! Total flux subtracted in 200 components = 0.0006067 Jy
! Clean residual min=-0.001010 max=0.001345 Jy/beam
! Clean residual mean=-0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.106665 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 74 components and 0.106665 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7243 mas, bmaj=2.005 mas, bpa=4.459 degrees
! Estimated noise=0.335235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228259 Jy
! Component: 100  -  total flux cleaned = 0.000393564 Jy
! Component: 150  -  total flux cleaned = 0.000420135 Jy
! Component: 200  -  total flux cleaned = 0.000445349 Jy
! Total flux subtracted in 200 components = 0.000445349 Jy
! Clean residual min=-0.001496 max=0.001159 Jy/beam
! Clean residual mean=-0.000000 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.10711 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.10711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048773Jy  sigma=1.278406
! Fit after  self-cal, rms=0.048766Jy  sigma=1.278211
wmodel /J0800-2302_X_map.mod
! wmodel: Unable to open new model file: /J0800-2302_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0800-2302_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7243 x 2.005 at 4.459 degrees (North through East)
! Clean map  min=-0.0012558  max=0.086291 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0800-2302_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0862912 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000299598 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04158 1.04158 2.08316 4.16633 8.33265 16.6653 33.3306 66.6612
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  288.023 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0800-2302_X_dfm.log closed on Thu May 19 23:58:31 2016