! Started logfile: /scr/pima/bg219a_uvs/J0800-2302_S_dfm.log on Thu May 19 23:58:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J0800-2302_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J0800-2302_S_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0800-2302
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1872 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0800-2302_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007020Jy  sigma=22.256376
! Fit after  self-cal, rms=0.928055Jy  sigma=20.477597
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.908 mas, bmaj=6.935 mas, bpa=4.585 degrees
! Estimated noise=1.04507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525399 Jy
! Component: 100  -  total flux cleaned = 0.0673806 Jy
! Total flux subtracted in 100 components = 0.0673806 Jy
! Clean residual min=-0.006331 max=0.007877 Jy/beam
! Clean residual mean=-0.000056 rms=0.001975 Jy/beam
! Combined flux in latest and established models = 0.0673806 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0673806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058407Jy  sigma=1.224316
! Fit after  self-cal, rms=0.058120Jy  sigma=1.214657
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=8.109 mas, bpa=2.284 degrees
! Estimated noise=0.783378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135138 Jy
! Component: 100  -  total flux cleaned = 0.0203385 Jy
! Component: 150  -  total flux cleaned = 0.0239159 Jy
! Component: 200  -  total flux cleaned = 0.0258808 Jy
! Total flux subtracted in 200 components = 0.0258808 Jy
! Clean residual min=-0.003959 max=0.003754 Jy/beam
! Clean residual mean=-0.000018 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.0932614 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 0.0932614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055244Jy  sigma=1.144526
! Fit after  self-cal, rms=0.055281Jy  sigma=1.142727
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.403 x 8.109 at 2.284 degrees (North through East)
! Clean map  min=-0.0038707  max=0.073072 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.06     NL        1.03     OV        1.05     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.97     NL        0.92     OV        1.09     
!   PT        1.00     SC        1.13     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.07     NL        0.98     OV        1.03     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.90     MK        0.94     NL        1.07     OV        1.19     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.055281Jy  sigma=1.142727
! Fit after  self-cal, rms=0.054673Jy  sigma=1.134795
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.407 mas, bmaj=8.154 mas, bpa=2.395 degrees
! Estimated noise=0.775547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000473381 Jy
! Component: 100  -  total flux cleaned = 0.000493527 Jy
! Component: 150  -  total flux cleaned = 0.000478898 Jy
! Component: 200  -  total flux cleaned = 0.000465215 Jy
! Total flux subtracted in 200 components = 0.000465215 Jy
! Clean residual min=-0.003233 max=0.003078 Jy/beam
! Clean residual mean=0.000018 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.0937266 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.0937266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054658Jy  sigma=1.134633
! Fit after  self-cal, rms=0.054730Jy  sigma=1.134083
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054730Jy  sigma=1.134083
! Fit after  self-cal, rms=0.054869Jy  sigma=1.130771
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.395 mas, bmaj=8.144 mas, bpa=2.195 degrees
! Estimated noise=0.773407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463853 Jy
! Component: 100  -  total flux cleaned = 0.000512542 Jy
! Component: 150  -  total flux cleaned = 0.000525925 Jy
! Component: 200  -  total flux cleaned = 0.000537375 Jy
! Total flux subtracted in 200 components = 0.000537375 Jy
! Clean residual min=-0.003022 max=0.002716 Jy/beam
! Clean residual mean=0.000007 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.094264 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.094264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054856Jy  sigma=1.130662
! Fit after  self-cal, rms=0.054903Jy  sigma=1.130441
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.87472e-06 Jy
! Component: 100  -  total flux cleaned = 1.77223e-05 Jy
! Component: 150  -  total flux cleaned = 7.81133e-06 Jy
! Component: 200  -  total flux cleaned = -8.1232e-07 Jy
! Total flux subtracted in 200 components = -8.1232e-07 Jy
! Clean residual min=-0.003046 max=0.002770 Jy/beam
! Clean residual mean=0.000007 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.0942632 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.0942632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054897Jy  sigma=1.130395
! Fit after  self-cal, rms=0.054895Jy  sigma=1.130387
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054895Jy  sigma=1.130387
! Fit after  self-cal, rms=0.054743Jy  sigma=1.130275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=8.123 mas, bpa=2.089 degrees
! Estimated noise=0.770896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428783 Jy
! Component: 100  -  total flux cleaned = 0.000455119 Jy
! Component: 150  -  total flux cleaned = 0.00046672 Jy
! Component: 200  -  total flux cleaned = 0.000476804 Jy
! Total flux subtracted in 200 components = 0.000476804 Jy
! Clean residual min=-0.002994 max=0.002736 Jy/beam
! Clean residual mean=0.000006 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.09474 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.09474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054732Jy  sigma=1.130208
! Fit after  self-cal, rms=0.054739Jy  sigma=1.130194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.12969e-06 Jy
! Component: 100  -  total flux cleaned = 4.80447e-06 Jy
! Component: 150  -  total flux cleaned = -3.37137e-06 Jy
! Component: 200  -  total flux cleaned = -3.19073e-06 Jy
! Total flux subtracted in 200 components = -3.19073e-06 Jy
! Clean residual min=-0.003016 max=0.002744 Jy/beam
! Clean residual mean=0.000006 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.0947368 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 73 components and 0.0947368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054735Jy  sigma=1.130163
! Fit after  self-cal, rms=0.054732Jy  sigma=1.130157
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054732Jy  sigma=1.130157
! Fit after  self-cal, rms=0.054505Jy  sigma=1.130091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.061 mas, bmaj=18.76 mas, bpa=0.415 degrees
! Estimated noise=0.978792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339637 Jy
! Component: 100  -  total flux cleaned = 0.000349704 Jy
! Component: 150  -  total flux cleaned = 0.000365047 Jy
! Component: 200  -  total flux cleaned = 0.000385804 Jy
! Total flux subtracted in 200 components = 0.000385804 Jy
! Clean residual min=-0.002118 max=0.002429 Jy/beam
! Clean residual mean=0.000013 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.0951226 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 75 components and 0.0951226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054509Jy  sigma=1.130135
! Fit after  self-cal, rms=0.054504Jy  sigma=1.130076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.92779e-05 Jy
! Component: 100  -  total flux cleaned = -1.95564e-05 Jy
! Component: 150  -  total flux cleaned = -1.86871e-05 Jy
! Component: 200  -  total flux cleaned = -2.51267e-07 Jy
! Total flux subtracted in 200 components = -2.51267e-07 Jy
! Clean residual min=-0.002101 max=0.002427 Jy/beam
! Clean residual mean=0.000013 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.0951224 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 75 components and 0.0951224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054509Jy  sigma=1.130135
! Fit after  self-cal, rms=0.054503Jy  sigma=1.130065
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=8.101 mas, bpa=2.021 degrees
! Estimated noise=0.768342 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.369 x 8.101 at 2.021 degrees (North through East)
! Clean map  min=-0.0027793  max=0.072146 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.874 mas, bmaj=6.928 mas, bpa=4.674 degrees
! Estimated noise=1.02339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513144 Jy
! Component: 100  -  total flux cleaned = 0.0665909 Jy
! Component: 150  -  total flux cleaned = 0.0759674 Jy
! Component: 200  -  total flux cleaned = 0.0822186 Jy
! Total flux subtracted in 200 components = 0.0822186 Jy
! Clean residual min=-0.004790 max=0.004135 Jy/beam
! Clean residual mean=-0.000025 rms=0.001150 Jy/beam
! Combined flux in latest and established models = 0.0822186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0822186 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=8.101 mas, bpa=2.021 degrees
! Estimated noise=0.768342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616618 Jy
! Component: 100  -  total flux cleaned = 0.00929395 Jy
! Component: 150  -  total flux cleaned = 0.0109194 Jy
! Component: 200  -  total flux cleaned = 0.0118104 Jy
! Total flux subtracted in 200 components = 0.0118104 Jy
! Clean residual min=-0.003119 max=0.002571 Jy/beam
! Clean residual mean=0.000001 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.094029 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 48 components and 0.094029 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.061 mas, bmaj=18.76 mas, bpa=0.415 degrees
! Estimated noise=0.978792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884178 Jy
! Component: 100  -  total flux cleaned = 0.000967031 Jy
! Component: 150  -  total flux cleaned = 0.000983561 Jy
! Component: 200  -  total flux cleaned = 0.00100476 Jy
! Total flux subtracted in 200 components = 0.00100476 Jy
! Clean residual min=-0.002083 max=0.002457 Jy/beam
! Clean residual mean=0.000012 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.0950338 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.25454e-05 Jy
! Component: 100  -  total flux cleaned = 2.88831e-05 Jy
! Component: 150  -  total flux cleaned = 3.82729e-05 Jy
! Component: 200  -  total flux cleaned = 4.66227e-05 Jy
! Total flux subtracted in 200 components = 4.66227e-05 Jy
! Clean residual min=-0.002040 max=0.002464 Jy/beam
! Clean residual mean=0.000013 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.0950804 Jy
! Adding 4 model components to the UV plane model.
! The established model now contains 50 components and 0.0950804 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=8.101 mas, bpa=2.021 degrees
! Estimated noise=0.768342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.81335e-05 Jy
! Component: 100  -  total flux cleaned = -5.74305e-05 Jy
! Component: 150  -  total flux cleaned = -2.69365e-05 Jy
! Component: 200  -  total flux cleaned = -3.46397e-05 Jy
! Total flux subtracted in 200 components = -3.46397e-05 Jy
! Clean residual min=-0.002988 max=0.002674 Jy/beam
! Clean residual mean=0.000006 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.0950458 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.0950458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054500Jy  sigma=1.130102
! Fit after  self-cal, rms=0.054482Jy  sigma=1.130049
wmodel /J0800-2302_S_map.mod
! wmodel: Unable to open new model file: /J0800-2302_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J0800-2302_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.369 x 8.101 at 2.021 degrees (North through East)
! Clean map  min=-0.0028222  max=0.071949 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J0800-2302_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.071949 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000692191 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.88617 2.88617 5.77235 11.5447 23.0894 46.1788 92.3576
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  103.943 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J0800-2302_S_dfm.log closed on Thu May 19 23:58:27 2016